From: John Crispin <blogic@openwrt.org>
To: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org, John Crispin <blogic@openwrt.org>
Subject: [PATCH V2 06/16] MIPS: ralink: extend RT3050 dtsi file
Date: Fri, 12 Apr 2013 09:27:33 +0200 [thread overview]
Message-ID: <1365751663-5725-6-git-send-email-blogic@openwrt.org> (raw)
In-Reply-To: <1365751663-5725-1-git-send-email-blogic@openwrt.org>
Add some additional properties to the dtsi file for ethernet and wifi.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ralink/dts/rt3050.dtsi | 96 ++++++++++++++++++++++++++++------
arch/mips/ralink/dts/rt3052_eval.dts | 2 +-
2 files changed, 82 insertions(+), 16 deletions(-)
diff --git a/arch/mips/ralink/dts/rt3050.dtsi b/arch/mips/ralink/dts/rt3050.dtsi
index 069d066..5aede8d 100644
--- a/arch/mips/ralink/dts/rt3050.dtsi
+++ b/arch/mips/ralink/dts/rt3050.dtsi
@@ -1,7 +1,7 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "ralink,rt3050-soc", "ralink,rt3052-soc";
+ compatible = "ralink,rt3050-soc", "ralink,rt3052-soc", "ralink,rt3350-soc";
cpus {
cpu@0 {
@@ -23,7 +23,7 @@
palmbus@10000000 {
compatible = "palmbus";
reg = <0x10000000 0x200000>;
- ranges = <0x0 0x10000000 0x1FFFFF>;
+ ranges = <0x0 0x10000000 0x1FFFFF>;
#address-cells = <1>;
#size-cells = <1>;
@@ -34,8 +34,18 @@
};
timer@100 {
+ compatible = "ralink,rt3052-timer", "ralink,rt2880-timer";
+ reg = <0x100 0x20>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <1>;
+
+ status = "disabled";
+ };
+
+ watchdog@120 {
compatible = "ralink,rt3052-wdt", "ralink,rt2880-wdt";
- reg = <0x100 0x100>;
+ reg = <0x120 0x10>;
};
intc: intc@200 {
@@ -61,10 +71,12 @@
gpio-controller;
#gpio-cells = <2>;
- ralink,ngpio = <24>;
- ralink,regs = [ 00 04 08 0c
- 20 24 28 2c
- 30 34 ];
+ ralink,num-gpios = <24>;
+ ralink,register-map = [ 00 04 08 0c
+ 20 24 28 2c
+ 30 34 ];
+
+ status = "disabled";
};
gpio1: gpio@638 {
@@ -74,10 +86,12 @@
gpio-controller;
#gpio-cells = <2>;
- ralink,ngpio = <16>;
- ralink,regs = [ 00 04 08 0c
- 10 14 18 1c
- 20 24 ];
+ ralink,num-gpios = <16>;
+ ralink,register-map = [ 00 04 08 0c
+ 10 14 18 1c
+ 20 24 ];
+
+ status = "disabled";
};
gpio2: gpio@660 {
@@ -87,10 +101,21 @@
gpio-controller;
#gpio-cells = <2>;
- ralink,ngpio = <12>;
- ralink,regs = [ 00 04 08 0c
- 10 14 18 1c
- 20 24 ];
+ ralink,num-gpios = <12>;
+ ralink,register-map = [ 00 04 08 0c
+ 10 14 18 1c
+ 20 24 ];
+
+ status = "disabled";
+ };
+
+ spi@b00 {
+ compatible = "ralink,rt3050-spi", "ralink,rt2880-spi";
+ reg = <0xb00 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
};
uartlite@c00 {
@@ -102,5 +127,46 @@
reg-shift = <2>;
};
+
+ };
+
+ ethernet@10100000 {
+ compatible = "ralink,rt3050-eth";
+ reg = <0x10100000 10000>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <5>;
+
+ status = "disabled";
+ };
+
+ esw@10110000 {
+ compatible = "ralink,rt3050-esw";
+ reg = <0x10110000 8000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <17>;
+
+ status = "disabled";
+ };
+
+ wmac@10180000 {
+ compatible = "ralink,rt3050-wmac", "ralink,rt2880-wmac";
+ reg = <0x10180000 40000>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <6>;
+
+ status = "disabled";
+ };
+
+ otg@101c0000 {
+ compatible = "ralink,rt3050-otg";
+ reg = <0x101c0000 40000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <18>;
+
+ status = "disabled";
};
};
diff --git a/arch/mips/ralink/dts/rt3052_eval.dts b/arch/mips/ralink/dts/rt3052_eval.dts
index 148a590..dc56e58 100644
--- a/arch/mips/ralink/dts/rt3052_eval.dts
+++ b/arch/mips/ralink/dts/rt3052_eval.dts
@@ -14,7 +14,7 @@
palmbus@10000000 {
sysc@0 {
- ralink,pinmmux = "uartlite", "spi";
+ ralink,pinmux = "uartlite", "spi";
ralink,uartmux = "gpio";
ralink,wdtmux = <0>;
};
--
1.7.10.4
next prev parent reply other threads:[~2013-04-12 7:34 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-12 7:27 [PATCH V2 01/16] MIPS: ralink: add PCI IRQ handling John Crispin
2013-04-12 7:27 ` [PATCH V2 02/16] MIPS: ralink: fix RT305x clock setup John Crispin
2013-04-12 8:22 ` Gabor Juhos
2013-04-12 8:21 ` John Crispin
2013-04-12 13:00 ` Sergei Shtylyov
2013-04-12 7:27 ` [PATCH V2 03/16] MIPS: ralink: add missing comment in irq driver John Crispin
2013-04-12 8:24 ` Gabor Juhos
2013-04-12 7:27 ` [PATCH V2 04/16] MIPS: ralink: add RT5350 sdram register defines John Crispin
2013-04-12 8:29 ` Gabor Juhos
2013-04-12 7:27 ` [PATCH V2 05/16] MIPS: ralink: add RT3352 usb " John Crispin
2013-04-12 8:47 ` Gabor Juhos
2013-04-12 7:27 ` John Crispin [this message]
2013-04-12 9:22 ` [PATCH V2 06/16] MIPS: ralink: extend RT3050 dtsi file Gabor Juhos
2013-04-12 7:27 ` [PATCH V2 07/16] MIPS: ralink: add RT5350 " John Crispin
2013-04-12 9:25 ` Gabor Juhos
2013-04-12 7:27 ` [PATCH V2 08/16] MIPS: ralink: make early_printk work on RT2880 John Crispin
2013-04-12 9:28 ` Gabor Juhos
2013-04-12 7:27 ` [PATCH V2 09/16] MIPS: ralink: adds support for RT2880 SoC family John Crispin
2013-04-12 11:12 ` Gabor Juhos
2013-04-12 11:19 ` John Crispin
2013-04-12 17:03 ` Gabor Juhos
2013-04-12 7:27 ` [PATCH V2 10/16] MIPS: ralink: add rt2880 dts files John Crispin
2013-04-12 7:27 ` [PATCH V2 11/16] MIPS: ralink: adds support for RT3883 SoC family John Crispin
2013-04-12 11:13 ` Gabor Juhos
2013-04-12 7:27 ` [PATCH V2 12/16] MIPS: ralink: add rt3883 dts files John Crispin
2013-04-12 7:27 ` [PATCH V2 13/16] MIPS: ralink: adds support for MT7620 SoC family John Crispin
2013-04-12 7:27 ` [PATCH V2 14/16] MIPS: ralink: add MT7620 dts files John Crispin
2013-04-12 7:27 ` [PATCH V2 15/16] MIPS: ralink: add support for periodic timer irq John Crispin
2013-04-12 16:35 ` Gabor Juhos
2013-04-12 7:27 ` [PATCH V2 16/16] MIPS: ralink: add cpu-feature-overrides.h John Crispin
2013-04-12 17:20 ` Gabor Juhos
2013-04-12 8:21 ` [PATCH V2 01/16] MIPS: ralink: add PCI IRQ handling Gabor Juhos
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1365751663-5725-6-git-send-email-blogic@openwrt.org \
--to=blogic@openwrt.org \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox