From: Gabor Juhos <juhosg@openwrt.org>
To: John Crispin <blogic@openwrt.org>
Cc: Ralf Baechle <ralf@linux-mips.org>, linux-mips@linux-mips.org
Subject: Re: [PATCH V2 05/16] MIPS: ralink: add RT3352 usb register defines
Date: Fri, 12 Apr 2013 10:47:58 +0200 [thread overview]
Message-ID: <5167CA3E.2080806@openwrt.org> (raw)
In-Reply-To: <1365751663-5725-5-git-send-email-blogic@openwrt.org>
2013.04.12. 9:27 keltezéssel, John Crispin írta:
> Add a few missing defines that are needed to make USB work on the RT3352
> and RT5350.
This is not fully correct. This change contains definitions which are not
related to USB at all and those are used by a previous patch. You said that you
will reorder the patches, but please change the log as well when you are doing that.
-Gabor
>
> Signed-off-by: John Crispin <blogic@openwrt.org>
> ---
> arch/mips/include/asm/mach-ralink/rt305x.h | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h
> index 4e62cef..80cda8a 100644
> --- a/arch/mips/include/asm/mach-ralink/rt305x.h
> +++ b/arch/mips/include/asm/mach-ralink/rt305x.h
> @@ -144,4 +144,17 @@ static inline int soc_is_rt5350(void)
> #define RT305X_GPIO_MODE_SDRAM BIT(8)
> #define RT305X_GPIO_MODE_RGMII BIT(9)
>
> +#define RT3352_SYSC_REG_SYSCFG0 0x010
> +#define RT3352_SYSC_REG_SYSCFG1 0x014
> +#define RT3352_SYSC_REG_CLKCFG1 0x030
> +#define RT3352_SYSC_REG_RSTCTRL 0x034
> +#define RT3352_SYSC_REG_USB_PS 0x05c
> +
> +#define RT3352_CLKCFG0_XTAL_SEL BIT(20)
> +#define RT3352_CLKCFG1_UPHY0_CLK_EN BIT(18)
> +#define RT3352_CLKCFG1_UPHY1_CLK_EN BIT(20)
> +#define RT3352_RSTCTRL_UHST BIT(22)
> +#define RT3352_RSTCTRL_UDEV BIT(25)
> +#define RT3352_SYSCFG1_USB0_HOST_MODE BIT(10)
> +
> #endif
>
next prev parent reply other threads:[~2013-04-12 8:51 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-12 7:27 [PATCH V2 01/16] MIPS: ralink: add PCI IRQ handling John Crispin
2013-04-12 7:27 ` [PATCH V2 02/16] MIPS: ralink: fix RT305x clock setup John Crispin
2013-04-12 8:22 ` Gabor Juhos
2013-04-12 8:21 ` John Crispin
2013-04-12 13:00 ` Sergei Shtylyov
2013-04-12 7:27 ` [PATCH V2 03/16] MIPS: ralink: add missing comment in irq driver John Crispin
2013-04-12 8:24 ` Gabor Juhos
2013-04-12 7:27 ` [PATCH V2 04/16] MIPS: ralink: add RT5350 sdram register defines John Crispin
2013-04-12 8:29 ` Gabor Juhos
2013-04-12 7:27 ` [PATCH V2 05/16] MIPS: ralink: add RT3352 usb " John Crispin
2013-04-12 8:47 ` Gabor Juhos [this message]
2013-04-12 7:27 ` [PATCH V2 06/16] MIPS: ralink: extend RT3050 dtsi file John Crispin
2013-04-12 9:22 ` Gabor Juhos
2013-04-12 7:27 ` [PATCH V2 07/16] MIPS: ralink: add RT5350 " John Crispin
2013-04-12 9:25 ` Gabor Juhos
2013-04-12 7:27 ` [PATCH V2 08/16] MIPS: ralink: make early_printk work on RT2880 John Crispin
2013-04-12 9:28 ` Gabor Juhos
2013-04-12 7:27 ` [PATCH V2 09/16] MIPS: ralink: adds support for RT2880 SoC family John Crispin
2013-04-12 11:12 ` Gabor Juhos
2013-04-12 11:19 ` John Crispin
2013-04-12 17:03 ` Gabor Juhos
2013-04-12 7:27 ` [PATCH V2 10/16] MIPS: ralink: add rt2880 dts files John Crispin
2013-04-12 7:27 ` [PATCH V2 11/16] MIPS: ralink: adds support for RT3883 SoC family John Crispin
2013-04-12 11:13 ` Gabor Juhos
2013-04-12 7:27 ` [PATCH V2 12/16] MIPS: ralink: add rt3883 dts files John Crispin
2013-04-12 7:27 ` [PATCH V2 13/16] MIPS: ralink: adds support for MT7620 SoC family John Crispin
2013-04-12 7:27 ` [PATCH V2 14/16] MIPS: ralink: add MT7620 dts files John Crispin
2013-04-12 7:27 ` [PATCH V2 15/16] MIPS: ralink: add support for periodic timer irq John Crispin
2013-04-12 16:35 ` Gabor Juhos
2013-04-12 7:27 ` [PATCH V2 16/16] MIPS: ralink: add cpu-feature-overrides.h John Crispin
2013-04-12 17:20 ` Gabor Juhos
2013-04-12 8:21 ` [PATCH V2 01/16] MIPS: ralink: add PCI IRQ handling Gabor Juhos
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5167CA3E.2080806@openwrt.org \
--to=juhosg@openwrt.org \
--cc=blogic@openwrt.org \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox