From: Binbin Zhou <zhoubb@lemote.com>
To: Ralf Baechle <ralf@linux-mips.org>
Cc: John Crispin <john@phrozen.org>,
"Steven J. Hill" <Steven.Hill@imgtec.com>,
linux-mips@linux-mips.org, Fuxin Zhang <zhangfx@lemote.com>,
Zhangjin Wu <wuzhangjin@gmail.com>,
Kelvin Cheung <keguang.zhang@gmail.com>,
Binbin Zhou <zhoubb@lemote.com>, Chunbo Cui <cuicb@lemote.com>,
Huacai Chen <chenhc@lemote.com>
Subject: [PATCH v2 1/8] MIPS: Loongson: Add basic Loongson-1A CPU support
Date: Wed, 17 Jun 2015 18:32:39 +0800 [thread overview]
Message-ID: <1434537166-5385-2-git-send-email-zhoubb@lemote.com> (raw)
In-Reply-To: <1434537166-5385-1-git-send-email-zhoubb@lemote.com>
The Loongson 1A is similar with Loongson 1B, which is a 32-bit SoC.
It implements the MIPS32 release 2 instruction set.
They share the same PRID, so we rewrite the PRID_REV_LOONGSON1B to
PRID_REV_LOONGSON1A_1B, and use their CPU macros to distinguish.
Signed-off-by: Chunbo Cui <cuicb@lemote.com>
Signed-off-by: Binbin Zhou <zhoubb@lemote.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
---
arch/mips/include/asm/cpu-type.h | 3 ++-
arch/mips/include/asm/cpu.h | 2 +-
arch/mips/kernel/cpu-probe.c | 6 +++++-
arch/mips/loongson32/Platform | 1 +
arch/mips/loongson32/common/setup.c | 6 +++++-
arch/mips/mm/c-r4k.c | 7 +++++++
6 files changed, 21 insertions(+), 4 deletions(-)
diff --git a/arch/mips/include/asm/cpu-type.h b/arch/mips/include/asm/cpu-type.h
index d41e8e2..b05908c 100644
--- a/arch/mips/include/asm/cpu-type.h
+++ b/arch/mips/include/asm/cpu-type.h
@@ -24,7 +24,8 @@ static inline int __pure __get_cpu_type(const int cpu_type)
case CPU_LOONGSON3:
#endif
-#ifdef CONFIG_SYS_HAS_CPU_LOONGSON1B
+#if defined(CONFIG_SYS_HAS_CPU_LOONGSON1A) || \
+ defined(CONFIG_SYS_HAS_CPU_LOONGSON1B)
case CPU_LOONGSON1:
#endif
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index e46e406..a868441 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -233,7 +233,7 @@
#define PRID_REV_VR4181A 0x0070 /* Same as VR4122 */
#define PRID_REV_VR4130 0x0080
#define PRID_REV_34K_V1_0_2 0x0022
-#define PRID_REV_LOONGSON1B 0x0020
+#define PRID_REV_LOONGSON1A_1B 0x0020
#define PRID_REV_LOONGSON2E 0x0002
#define PRID_REV_LOONGSON2F 0x0003
#define PRID_REV_LOONGSON3A 0x0005
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index dbe0792..fa5c33e 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -1006,8 +1006,12 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
c->cputype = CPU_LOONGSON1;
switch (c->processor_id & PRID_REV_MASK) {
- case PRID_REV_LOONGSON1B:
+ case PRID_REV_LOONGSON1A_1B:
+#ifdef CONFIG_CPU_LOONGSON1A
+ __cpu_name[cpu] = "Loongson 1A";
+#else
__cpu_name[cpu] = "Loongson 1B";
+#endif
break;
}
diff --git a/arch/mips/loongson32/Platform b/arch/mips/loongson32/Platform
index ebb6dc2..e114c85 100644
--- a/arch/mips/loongson32/Platform
+++ b/arch/mips/loongson32/Platform
@@ -4,4 +4,5 @@ cflags-$(CONFIG_CPU_LOONGSON1) += \
platform-$(CONFIG_MACH_LOONGSON32) += loongson32/
cflags-$(CONFIG_MACH_LOONGSON32) += -I$(srctree)/arch/mips/include/asm/mach-loongson32
+load-$(CONFIG_LOONGSON1_LS1A) += 0xffffffff80200000
load-$(CONFIG_LOONGSON1_LS1B) += 0xffffffff80100000
diff --git a/arch/mips/loongson32/common/setup.c b/arch/mips/loongson32/common/setup.c
index 62f41af..c3d2036 100644
--- a/arch/mips/loongson32/common/setup.c
+++ b/arch/mips/loongson32/common/setup.c
@@ -21,8 +21,12 @@ const char *get_system_type(void)
unsigned int processor_id = (¤t_cpu_data)->processor_id;
switch (processor_id & PRID_REV_MASK) {
- case PRID_REV_LOONGSON1B:
+ case PRID_REV_LOONGSON1A_1B:
+#ifdef CONFIG_CPU_LOONGSON1A
+ return "LOONGSON LS1A";
+#else
return "LOONGSON LS1B";
+#endif
default:
return "LOONGSON (unknown)";
}
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 7f660dc..cec179f 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -1277,6 +1277,13 @@ static void probe_pcache(void)
c->dcache.flags |= MIPS_CACHE_PINDEX;
break;
}
+ case CPU_LOONGSON1:
+ if ((read_c0_config7() & (1 << 16))) {
+ /* effectively physically indexed dcache,
+ thus no virtual aliases. */
+ c->dcache.flags |= MIPS_CACHE_PINDEX;
+ break;
+ }
default:
if (has_74k_erratum || c->dcache.waysize > PAGE_SIZE)
c->dcache.flags |= MIPS_CACHE_ALIASES;
--
1.9.0
next prev parent reply other threads:[~2015-06-17 10:16 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-17 10:32 [PATCH v2 0/8] MIPS: Loongson: Add the Loongson-1A processor support Binbin Zhou
2015-06-17 10:32 ` Binbin Zhou [this message]
2015-06-17 10:32 ` [PATCH v2 2/8] MIPS: Loongson: Add Loongson-1A Kconfig options Binbin Zhou
2015-06-17 10:32 ` [PATCH v2 3/8] MIPS: Loongson: Add platform devices for Loongson-1A/1B Binbin Zhou
2015-08-03 15:21 ` Ralf Baechle
2015-08-04 3:15 ` Huacai Chen
2015-06-17 10:32 ` [PATCH v2 4/8] MIPS: Loongson: Add loongson-1A board support Binbin Zhou
2015-06-17 10:32 ` [PATCH v2 5/8] MIPS: Loongson-1A: Workaround for pll register can't be read Binbin Zhou
2015-06-17 10:32 ` [PATCH v2 6/8] MIPS: Loongson-1A: Add IRQ type setting support Binbin Zhou
2015-06-17 10:32 ` [PATCH v2 7/8] MIPS: Loongson-1A: Enable SPARSEMEN and HIGHMEM Binbin Zhou
2015-06-17 10:32 ` [PATCH v2 8/8] MIPS: Loongson: Add a Loongson-1A default config file Binbin Zhou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1434537166-5385-2-git-send-email-zhoubb@lemote.com \
--to=zhoubb@lemote.com \
--cc=Steven.Hill@imgtec.com \
--cc=chenhc@lemote.com \
--cc=cuicb@lemote.com \
--cc=john@phrozen.org \
--cc=keguang.zhang@gmail.com \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
--cc=wuzhangjin@gmail.com \
--cc=zhangfx@lemote.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox