From: Huacai Chen <chenhc@lemote.com>
To: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <james.hogan@mips.com>,
"Steven J . Hill" <Steven.Hill@cavium.com>,
linux-mips@linux-mips.org, Fuxin Zhang <zhangfx@lemote.com>,
Zhangjin Wu <wuzhangjin@gmail.com>,
Huacai Chen <chenhc@lemote.com>
Subject: [PATCH V2 09/12] MIPS: Loongson: Add kexec/kdump support
Date: Sat, 27 Jan 2018 11:22:16 +0800 [thread overview]
Message-ID: <1517023336-17575-3-git-send-email-chenhc@lemote.com> (raw)
In-Reply-To: <1517023336-17575-1-git-send-email-chenhc@lemote.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
---
arch/mips/kernel/relocate_kernel.S | 30 +++++++++
arch/mips/loongson64/common/env.c | 8 +++
arch/mips/loongson64/common/reset.c | 119 ++++++++++++++++++++++++++++++++++
arch/mips/loongson64/loongson-3/smp.c | 4 ++
4 files changed, 161 insertions(+)
diff --git a/arch/mips/kernel/relocate_kernel.S b/arch/mips/kernel/relocate_kernel.S
index c6bbf21..e73edc7 100644
--- a/arch/mips/kernel/relocate_kernel.S
+++ b/arch/mips/kernel/relocate_kernel.S
@@ -135,6 +135,36 @@ LEAF(kexec_smp_wait)
#else
sync
#endif
+
+#ifdef CONFIG_CPU_LOONGSON3
+ /* s0:prid s1:initfn */
+ /* t0:base t1:cpuid t2:node t3:core t9:count */
+ mfc0 t1, $15, 1
+ andi t1, 0x3ff
+ dli t0, 0x900000003ff01000
+ andi t3, t1, 0x3
+ sll t3, 8 /* get core id */
+ or t0, t0, t3
+ andi t2, t1, 0xc
+ dsll t2, 42 /* get node id */
+ or t0, t0, t2
+ mfc0 s0, $15, 0
+ andi s0, s0, 0xf
+ blt s0, 0x6, 1f /* Loongson-3A1000 */
+ bgt s0, 0x7, 1f /* Loongson-3A2000/3A3000 */
+ dsrl t2, 30 /* Loongson-3B1000/3B1500 need bit15:14 */
+ or t0, t0, t2
+1: li t9, 0x100 /* wait for init loop */
+2: addiu t9, -1 /* limit mailbox access */
+ bnez t9, 2b
+ ld s1, 0x20(t0) /* get PC via mailbox */
+ beqz s1, 1b
+ ld sp, 0x28(t0) /* get SP via mailbox */
+ ld gp, 0x30(t0) /* get GP via mailbox */
+ ld a1, 0x38(t0)
+ jr s1 /* jump to initial PC */
+#endif
+
j s1
END(kexec_smp_wait)
#endif
diff --git a/arch/mips/loongson64/common/env.c b/arch/mips/loongson64/common/env.c
index 2928ac5..990a2d69 100644
--- a/arch/mips/loongson64/common/env.c
+++ b/arch/mips/loongson64/common/env.c
@@ -72,6 +72,7 @@ void __init prom_init_env(void)
pr_info("memsize=%u, highmemsize=%u\n", memsize, highmemsize);
#else
+ int i;
struct boot_params *boot_p;
struct loongson_params *loongson_p;
struct system_loongson *esys;
@@ -149,6 +150,13 @@ void __init prom_init_env(void)
loongson_sysconf.nr_cpus = ecpu->nr_cpus;
loongson_sysconf.boot_cpu_id = ecpu->cpu_startup_core_id;
loongson_sysconf.reserved_cpus_mask = ecpu->reserved_cores_mask;
+#ifdef CONFIG_KEXEC
+ loongson_sysconf.boot_cpu_id = get_ebase_cpunum();
+ for (i = 0; i < loongson_sysconf.boot_cpu_id; i++)
+ loongson_sysconf.reserved_cpus_mask |= (1<<i);
+ pr_info("Boot CPU ID is being fixed from %d to %d\n",
+ ecpu->cpu_startup_core_id, loongson_sysconf.boot_cpu_id);
+#endif
if (ecpu->nr_cpus > NR_CPUS || ecpu->nr_cpus == 0)
loongson_sysconf.nr_cpus = NR_CPUS;
loongson_sysconf.nr_nodes = (loongson_sysconf.nr_cpus +
diff --git a/arch/mips/loongson64/common/reset.c b/arch/mips/loongson64/common/reset.c
index a60715e..5f65a4e 100644
--- a/arch/mips/loongson64/common/reset.c
+++ b/arch/mips/loongson64/common/reset.c
@@ -11,9 +11,14 @@
*/
#include <linux/init.h>
#include <linux/pm.h>
+#include <linux/cpu.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/kexec.h>
#include <asm/idle.h>
#include <asm/reboot.h>
+#include <asm/bootinfo.h>
#include <loongson.h>
#include <boot_param.h>
@@ -80,12 +85,126 @@ static void loongson_halt(void)
}
}
+#ifdef CONFIG_KEXEC
+
+/* 0X80000000~0X80200000 is safe */
+#define MAX_ARGS 64
+#define KEXEC_CTRL_CODE 0XFFFFFFFF80100000UL
+#define KEXEC_ARGV_ADDR 0XFFFFFFFF80108000UL
+#define KEXEC_ARGV_SIZE 3060
+#define KEXEC_ENVP_SIZE 4500
+
+void *kexec_argv;
+void *kexec_envp;
+extern const size_t relocate_new_kernel_size;
+
+static int loongson_kexec_prepare(struct kimage *image)
+{
+ int i, argc = 0;
+ unsigned int *argv;
+ char *str, *ptr, *bootloader = "kexec";
+
+ /* argv at offset 0, argv[] at offset KEXEC_ARGV_SIZE/2 */
+ argv = (unsigned int *)kexec_argv;
+ argv[argc++] = (unsigned int)(KEXEC_ARGV_ADDR + KEXEC_ARGV_SIZE/2);
+
+ for (i = 0; i < image->nr_segments; i++) {
+ if (!strncmp(bootloader, (char *)image->segment[i].buf,
+ strlen(bootloader))) {
+ /*
+ * convert command line string to array
+ * of parameters (as bootloader does).
+ */
+ int offt;
+ memcpy(kexec_argv + KEXEC_ARGV_SIZE/2, image->segment[i].buf, KEXEC_ARGV_SIZE/2);
+ str = (char *)kexec_argv + KEXEC_ARGV_SIZE/2;
+ ptr = strchr(str, ' ');
+
+ while (ptr && (argc < MAX_ARGS)) {
+ *ptr = '\0';
+ if (ptr[1] != ' ') {
+ offt = (int)(ptr - str + 1);
+ argv[argc] = KEXEC_ARGV_ADDR + KEXEC_ARGV_SIZE/2 + offt;
+ argc++;
+ }
+ ptr = strchr(ptr + 1, ' ');
+ }
+ break;
+ }
+ }
+
+ kexec_args[0] = argc;
+ kexec_args[1] = fw_arg1;
+ kexec_args[2] = fw_arg2;
+ image->control_code_page = virt_to_page((void *)KEXEC_CTRL_CODE);
+
+ return 0;
+}
+
+#ifdef CONFIG_SMP
+static void kexec_smp_down(void *ignored)
+{
+ int cpu = smp_processor_id();
+
+ local_irq_disable();
+ set_cpu_online(cpu, false);
+ while (!atomic_read(&kexec_ready_to_reboot))
+ cpu_relax();
+
+ asm volatile (
+ " sync \n"
+ " synci ($0) \n");
+
+ relocated_kexec_smp_wait(NULL);
+}
+#endif
+
+static void loongson_kexec_shutdown(void)
+{
+#ifdef CONFIG_SMP
+ int cpu;
+
+ for_each_possible_cpu(cpu)
+ if (!cpu_online(cpu))
+ cpu_up(cpu); /* Everyone should go to reboot_code_buffer */
+
+ smp_call_function(kexec_smp_down, NULL, 0);
+ smp_wmb();
+ while (num_online_cpus() > 1) {
+ mdelay(1);
+ cpu_relax();
+ }
+#endif
+ memcpy((void *)fw_arg1, kexec_argv, KEXEC_ARGV_SIZE);
+ memcpy((void *)fw_arg2, kexec_envp, KEXEC_ENVP_SIZE);
+}
+
+static void loongson_crash_shutdown(struct pt_regs *regs)
+{
+ default_machine_crash_shutdown(regs);
+ memcpy((void *)fw_arg1, kexec_argv, KEXEC_ARGV_SIZE);
+ memcpy((void *)fw_arg2, kexec_envp, KEXEC_ENVP_SIZE);
+}
+
+#endif
+
static int __init mips_reboot_setup(void)
{
_machine_restart = loongson_restart;
_machine_halt = loongson_halt;
pm_power_off = loongson_poweroff;
+#ifdef CONFIG_KEXEC
+ kexec_argv = kmalloc(KEXEC_ARGV_SIZE, GFP_KERNEL);
+ kexec_envp = kmalloc(KEXEC_ENVP_SIZE, GFP_KERNEL);
+ fw_arg1 = KEXEC_ARGV_ADDR;
+ memcpy(kexec_envp, (void *)fw_arg2, KEXEC_ENVP_SIZE);
+
+ _machine_kexec_prepare = loongson_kexec_prepare;
+ _machine_kexec_shutdown = loongson_kexec_shutdown;
+ _machine_crash_shutdown = loongson_crash_shutdown;
+#endif
+
return 0;
}
diff --git a/arch/mips/loongson64/loongson-3/smp.c b/arch/mips/loongson64/loongson-3/smp.c
index 470e9c1..1e21ac4 100644
--- a/arch/mips/loongson64/loongson-3/smp.c
+++ b/arch/mips/loongson64/loongson-3/smp.c
@@ -387,6 +387,10 @@ static void __init loongson3_smp_setup(void)
ipi_status0_regs_init();
ipi_en0_regs_init();
ipi_mailbox_buf_init();
+
+ for (i = 0; i < loongson_sysconf.nr_cpus; i++)
+ loongson3_ipi_write64(0, (void *)(ipi_mailbox_buf[i]+0x0));
+
cpu_set_core(&cpu_data[0],
cpu_logical_map(0) % loongson_sysconf.cores_per_package);
cpu_data[0].package = cpu_logical_map(0) / loongson_sysconf.cores_per_package;
--
2.7.0
next prev parent reply other threads:[~2018-01-27 3:23 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-27 3:12 [PATCH V2 00/12] MIPS: Loongson: new features and improvements Huacai Chen
2018-01-27 3:12 ` [PATCH V2 01/12] MIPS: Loongson: Add Loongson-3A R3.1 basic support Huacai Chen
2018-01-27 3:12 ` [PATCH V2 02/12] MIPS: Loongson64: Define and use some CP0 registers Huacai Chen
2018-02-15 11:36 ` James Hogan
2018-01-27 3:12 ` [PATCH V2 03/12] MIPS: Loongson-3: Enable Store Fill Buffer at runtime Huacai Chen
2018-02-15 12:43 ` James Hogan
2018-01-27 3:19 ` [PATCH V2 04/12] MIPS: c-r4k: Add r4k_blast_scache_node for Loongson-3 Huacai Chen
2018-02-19 22:19 ` James Hogan
2018-01-27 3:20 ` [PATCH V2 05/12] MIPS: Loongson fix name confict - MEM_RESERVED Huacai Chen
2018-01-27 3:21 ` [PATCH V2 06/12] MIPS: Ensure pmd_present() returns false after pmd_mknotpresent() Huacai Chen
2018-01-27 3:22 ` [PATCH V2 07/12] MIPS: Add __cpu_full_name[] to make CPU names more human-readable Huacai Chen
2018-01-27 3:22 ` [PATCH V2 08/12] MIPS: Align kernel load address to 64KB Huacai Chen
2018-02-19 23:07 ` James Hogan
2018-02-20 22:14 ` Maciej W. Rozycki
2018-02-20 22:14 ` Maciej W. Rozycki
2018-02-20 22:25 ` James Hogan
2018-02-20 22:25 ` James Hogan
2018-02-20 22:53 ` Maciej W. Rozycki
2018-02-20 22:53 ` Maciej W. Rozycki
2018-02-20 22:58 ` James Hogan
2018-02-20 22:58 ` James Hogan
2018-02-20 23:38 ` Maciej W. Rozycki
2018-02-20 23:38 ` Maciej W. Rozycki
2018-02-21 11:13 ` James Hogan
2018-02-21 11:13 ` James Hogan
2018-02-26 12:41 ` Maciej W. Rozycki
2018-02-26 12:41 ` Maciej W. Rozycki
2018-01-27 3:22 ` Huacai Chen [this message]
2018-02-19 23:54 ` [PATCH V2 09/12] MIPS: Loongson: Add kexec/kdump support James Hogan
2018-01-27 3:22 ` [PATCH V2 10/12] MIPS: Loongson: Make CPUFreq usable for Loongson-3 Huacai Chen
2018-01-27 3:23 ` [PATCH V2 11/12] MIPS: Loongson-3: Fix CPU UART irq delivery problem Huacai Chen
2018-02-20 21:49 ` James Hogan
2018-01-27 3:23 ` [PATCH V2 12/12] MIPS: Loongson: Introduce and use WAR_LLSC_MB Huacai Chen
2018-02-20 22:21 ` James Hogan
2018-02-21 10:09 ` Maciej W. Rozycki
2018-02-21 10:09 ` Maciej W. Rozycki
2018-02-21 11:43 ` James Hogan
2018-02-20 21:42 ` [PATCH V2 10/12] MIPS: Loongson: Make CPUFreq usable for Loongson-3 James Hogan
2018-02-15 11:05 ` [PATCH V2 00/12] MIPS: Loongson: new features and improvements James Hogan
2018-02-28 2:23 ` Huacai Chen
2018-02-28 10:03 ` James Hogan
2018-03-01 2:35 ` Huacai Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1517023336-17575-3-git-send-email-chenhc@lemote.com \
--to=chenhc@lemote.com \
--cc=Steven.Hill@cavium.com \
--cc=james.hogan@mips.com \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
--cc=wuzhangjin@gmail.com \
--cc=zhangfx@lemote.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox