* Mount ext2 filesystem.
@ 1997-12-10 13:35 Takeshi Hakamada
1997-12-10 16:43 ` Alex deVries
` (2 more replies)
0 siblings, 3 replies; 13+ messages in thread
From: Takeshi Hakamada @ 1997-12-10 13:35 UTC (permalink / raw)
To: linux
Hi all,
I'm working on my R5000 Indy can mount second disk as root filesystem.
I've created ext2 filesystem from my i486-based Linux box and I connected
it to my Indy as the second drive. Then I booted vmlinux-indy-2.1.67
(made by Ralf) from the first disk on my Indy, mounted nfs-root filesystem
which is made by Ralf I know.
I can mount both the first disk(efs) and the second one(ext2).
However, when I try to invoke rpm which is made by Alan(libc/ld workaround
version), I get efs read error as follows:
efs: read error in indirect extents
attempt to access beyond end of device
08:01 rw=0, want=1207011792, limit=1965937
Do you think something wrong with my IRIX efs partition? When I mount
IRIX root partition, I can invoke some IRIX command(like ls, cp).
Anyway, why root-be-0.00.cpio.gz doesn't contain rpm binary?
I think rpm binary should be in root-be-0.00.cpio.gz.
Thanks,
--
Takeshi Hakamada
Nihon Silicon Graphics Cray
E-mail: hakamada@nsg.sgi.com, URL: http://reality.sgi.com/hakamada_nsg/
Phone: +81-45-682-3712, Fax: +81-45-682-0856
Voice mail: (internal)822-1300, (external)+81-3-5488-1863-1300
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Mount ext2 filesystem.
1997-12-10 13:35 Mount ext2 filesystem Takeshi Hakamada
@ 1997-12-10 16:43 ` Alex deVries
1997-12-10 17:11 ` ralf
1997-12-10 17:02 ` ralf
1997-12-10 22:43 ` Alan Cox
2 siblings, 1 reply; 13+ messages in thread
From: Alex deVries @ 1997-12-10 16:43 UTC (permalink / raw)
To: Takeshi Hakamada; +Cc: linux
On Wed, 10 Dec 1997, Takeshi Hakamada wrote:
> I'm working on my R5000 Indy can mount second disk as root filesystem.
> I've created ext2 filesystem from my i486-based Linux box and I connected
> it to my Indy as the second drive. Then I booted vmlinux-indy-2.1.67
> (made by Ralf) from the first disk on my Indy, mounted nfs-root filesystem
> which is made by Ralf I know.
> I can mount both the first disk(efs) and the second one(ext2).
>
> However, when I try to invoke rpm which is made by Alan(libc/ld workaround
> version), I get efs read error as follows:
> efs: read error in indirect extents
> attempt to access beyond end of device
> 08:01 rw=0, want=1207011792, limit=1965937
That looks like a problem with the EFS driver that Mike put in. I'm not
quite sure wher the problem is, but I get all sort of problems with EFS
myself. I'm busy with other things.
Actually, I just tried it, and with Ralf's latest kernel I got:
EFS: magic 0X1 doesn't match 0X72959 or 0X7295A!
EFS: failed checking Superblock
Unable to handle paging request at virtual address 00000000, epc ==
88057ab0, ra == 8808bbe8
... and then a complete hang.
> Do you think something wrong with my IRIX efs partition? When I mount
> IRIX root partition, I can invoke some IRIX command(like ls, cp).
I would trust Irix a lot more to handle EFS partitions than the current
Linux kernels.
> Anyway, why root-be-0.00.cpio.gz doesn't contain rpm binary?
> I think rpm binary should be in root-be-0.00.cpio.gz.
root-be-0.00.cpio.gz doesnt' contain RPM because it's version 0.00, and at
that point nobody had any RPM's to use. It will, though. I'll work on
root-be-0.01.tar.gz when I get a working libc (nudge, nudge...)
- Alex
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Mount ext2 filesystem.
1997-12-10 13:35 Mount ext2 filesystem Takeshi Hakamada
1997-12-10 16:43 ` Alex deVries
@ 1997-12-10 17:02 ` ralf
1997-12-10 22:43 ` Alan Cox
2 siblings, 0 replies; 13+ messages in thread
From: ralf @ 1997-12-10 17:02 UTC (permalink / raw)
To: Takeshi Hakamada; +Cc: linux
On Wed, Dec 10, 1997 at 10:35:39PM +0900, Takeshi Hakamada wrote:
> I'm working on my R5000 Indy can mount second disk as root filesystem.
> I've created ext2 filesystem from my i486-based Linux box and I connected
> it to my Indy as the second drive. Then I booted vmlinux-indy-2.1.67
> (made by Ralf) from the first disk on my Indy, mounted nfs-root filesystem
> which is made by Ralf I know.
> I can mount both the first disk(efs) and the second one(ext2).
>
> However, when I try to invoke rpm which is made by Alan(libc/ld workaround
> version), I get efs read error as follows:
>
> efs: read error in indirect extents
> attempt to access beyond end of device
> 08:01 rw=0, want=1207011792, limit=1965937
>
> Do you think something wrong with my IRIX efs partition? When I mount
> IRIX root partition, I can invoke some IRIX command(like ls, cp).
The efs filesystem for Linux is completly broken. If you want to transfer
files from IRIX to Linux I recommend something like NFS or ftp to another
machine.
> Anyway, why root-be-0.00.cpio.gz doesn't contain rpm binary?
> I think rpm binary should be in root-be-0.00.cpio.gz.
The archive was the first collection of binaries ever. It isn't really
intended to be a real distribution. Someone else promised to work on
an installation procedure rsn.
Ralf
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Mount ext2 filesystem.
1997-12-10 16:43 ` Alex deVries
@ 1997-12-10 17:11 ` ralf
0 siblings, 0 replies; 13+ messages in thread
From: ralf @ 1997-12-10 17:11 UTC (permalink / raw)
To: Alex deVries; +Cc: Takeshi Hakamada, linux
On Wed, Dec 10, 1997 at 11:43:03AM -0500, Alex deVries wrote:
> root-be-0.00.cpio.gz doesnt' contain RPM because it's version 0.00, and at
> that point nobody had any RPM's to use. It will, though. I'll work on
> root-be-0.01.tar.gz when I get a working libc (nudge, nudge...)
/pub/mips-linux/libc-2.0.4.tar.gz, and oh - keep your firstborn handy ;-)
Ralf
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Mount ext2 filesystem.
1997-12-10 13:35 Mount ext2 filesystem Takeshi Hakamada
1997-12-10 16:43 ` Alex deVries
1997-12-10 17:02 ` ralf
@ 1997-12-10 22:43 ` Alan Cox
1997-12-10 22:43 ` Alan Cox
1997-12-12 0:30 ` Takeshi Hakamada
2 siblings, 2 replies; 13+ messages in thread
From: Alan Cox @ 1997-12-10 22:43 UTC (permalink / raw)
To: Takeshi Hakamada; +Cc: linux
> However, when I try to invoke rpm which is made by Alan(libc/ld workaround
> version), I get efs read error as follows:
>
> efs: read error in indirect extents
> attempt to access beyond end of device
> 08:01 rw=0, want=1207011792, limit=1965937
The efs driver is still very limited and cant handle many file layouts.
> Anyway, why root-be-0.00.cpio.gz doesn't contain rpm binary?
> I think rpm binary should be in root-be-0.00.cpio.gz.
Personally I'd like to see a lot less in a final root-be-0.00. Really it
needs some minimal disk handling tools and rpm. The root-be is a good
start for an NFS root right now.
I used the installer stuff I did to get rpm on the disk by doing
on Linux x86
rpm2cpio rpm-2.3.11.mips.rpm >rpm.cpio
ftping it to Irix and using the install cpio option. Ive been poking at
better installing and talked to a few people about Arc firmware after Ralf
prodded me. Given the horror stories told I think the better option is
to finish producing a tool that takes a compressed ramdisk image (the initrd
image) that is used by setups like the redhat installer and merges it with
the kernel image so the existing bootup stuff can load it
The X86 has memory space problems (install in 8Mb), on the indy blowing
4Mbytes on the install ramdisk is almost an irrelevance.
Alan
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Mount ext2 filesystem.
1997-12-10 22:43 ` Alan Cox
@ 1997-12-10 22:43 ` Alan Cox
1997-12-12 0:30 ` Takeshi Hakamada
1 sibling, 0 replies; 13+ messages in thread
From: Alan Cox @ 1997-12-10 22:43 UTC (permalink / raw)
To: Takeshi Hakamada; +Cc: linux
> However, when I try to invoke rpm which is made by Alan(libc/ld workaround
> version), I get efs read error as follows:
>
> efs: read error in indirect extents
> attempt to access beyond end of device
> 08:01 rw=0, want=1207011792, limit=1965937
The efs driver is still very limited and cant handle many file layouts.
> Anyway, why root-be-0.00.cpio.gz doesn't contain rpm binary?
> I think rpm binary should be in root-be-0.00.cpio.gz.
Personally I'd like to see a lot less in a final root-be-0.00. Really it
needs some minimal disk handling tools and rpm. The root-be is a good
start for an NFS root right now.
I used the installer stuff I did to get rpm on the disk by doing
on Linux x86
rpm2cpio rpm-2.3.11.mips.rpm >rpm.cpio
ftping it to Irix and using the install cpio option. Ive been poking at
better installing and talked to a few people about Arc firmware after Ralf
prodded me. Given the horror stories told I think the better option is
to finish producing a tool that takes a compressed ramdisk image (the initrd
image) that is used by setups like the redhat installer and merges it with
the kernel image so the existing bootup stuff can load it
The X86 has memory space problems (install in 8Mb), on the indy blowing
4Mbytes on the install ramdisk is almost an irrelevance.
Alan
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Mount ext2 filesystem.
1997-12-10 22:43 ` Alan Cox
1997-12-10 22:43 ` Alan Cox
@ 1997-12-12 0:30 ` Takeshi Hakamada
1997-12-12 1:11 ` Alan Cox
1 sibling, 1 reply; 13+ messages in thread
From: Takeshi Hakamada @ 1997-12-12 0:30 UTC (permalink / raw)
To: alan; +Cc: linux
> > However, when I try to invoke rpm which is made by Alan(libc/ld workaround
> > version), I get efs read error as follows:
> >
> > efs: read error in indirect extents
> > attempt to access beyond end of device
> > 08:01 rw=0, want=1207011792, limit=1965937
>
> The efs driver is still very limited and cant handle many file layouts.
Okay.
> > Anyway, why root-be-0.00.cpio.gz doesn't contain rpm binary?
> > I think rpm binary should be in root-be-0.00.cpio.gz.
>
> Personally I'd like to see a lot less in a final root-be-0.00. Really it
> needs some minimal disk handling tools and rpm. The root-be is a good
> start for an NFS root right now.
>
> I used the installer stuff I did to get rpm on the disk by doing
>
> on Linux x86
>
> rpm2cpio rpm-2.3.11.mips.rpm >rpm.cpio
Thank you. I've converted rpm to cpio and I could have installed rpm binary.
But, I can't boot from local disk yet. If I can boot from local disk, I'd
like to update faq on the www.linux.sgi.com. How do you think about it?
> ftping it to Irix and using the install cpio option. Ive been poking at
> better installing and talked to a few people about Arc firmware after Ralf
> prodded me. Given the horror stories told I think the better option is
> to finish producing a tool that takes a compressed ramdisk image (the initrd
> image) that is used by setups like the redhat installer and merges it with
> the kernel image so the existing bootup stuff can load it
>
> The X86 has memory space problems (install in 8Mb), on the indy blowing
> 4Mbytes on the install ramdisk is almost an irrelevance.
Yes, when I installed RedHat4.2 on my poor note PC(8MBytes), it bothered me.
Cheers,
--
Takeshi Hakamada
Nihon Silicon Graphics Cray
E-mail: hakamada@nsg.sgi.com, URL: http://reality.sgi.com/hakamada_nsg/
Voice mail: (internal)822-1300, (external)+81-3-5488-1863-1300
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Mount ext2 filesystem.
1997-12-12 0:30 ` Takeshi Hakamada
@ 1997-12-12 1:11 ` Alan Cox
1997-12-12 1:11 ` Alan Cox
1997-12-12 1:16 ` Takeshi Hakamada
0 siblings, 2 replies; 13+ messages in thread
From: Alan Cox @ 1997-12-12 1:11 UTC (permalink / raw)
To: Takeshi Hakamada; +Cc: alan, linux
> Thank you. I've converted rpm to cpio and I could have installed rpm binary.
> But, I can't boot from local disk yet. If I can boot from local disk, I'd
> like to update faq on the www.linux.sgi.com. How do you think about it?
In irix, shutdown, restart hit the maintenance button to get to the arc
menu, hit command line and do I think its
boot /whatever/efs/vmlinux root=/dev/sdb1
(first partition disk 2 as root)
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Mount ext2 filesystem.
1997-12-12 1:11 ` Alan Cox
@ 1997-12-12 1:11 ` Alan Cox
1997-12-12 1:16 ` Takeshi Hakamada
1 sibling, 0 replies; 13+ messages in thread
From: Alan Cox @ 1997-12-12 1:11 UTC (permalink / raw)
To: Takeshi Hakamada; +Cc: alan, linux
> Thank you. I've converted rpm to cpio and I could have installed rpm binary.
> But, I can't boot from local disk yet. If I can boot from local disk, I'd
> like to update faq on the www.linux.sgi.com. How do you think about it?
In irix, shutdown, restart hit the maintenance button to get to the arc
menu, hit command line and do I think its
boot /whatever/efs/vmlinux root=/dev/sdb1
(first partition disk 2 as root)
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Mount ext2 filesystem.
1997-12-12 1:11 ` Alan Cox
1997-12-12 1:11 ` Alan Cox
@ 1997-12-12 1:16 ` Takeshi Hakamada
1997-12-12 2:52 ` Andrew O'Brien
1997-12-12 15:04 ` Eric Kimminau
1 sibling, 2 replies; 13+ messages in thread
From: Takeshi Hakamada @ 1997-12-12 1:16 UTC (permalink / raw)
To: alan; +Cc: linux
> > Thank you. I've converted rpm to cpio and I could have installed rpm binary.
> > But, I can't boot from local disk yet. If I can boot from local disk, I'd
> > like to update faq on the www.linux.sgi.com. How do you think about it?
>
> In irix, shutdown, restart hit the maintenance button to get to the arc
> menu, hit command line and do I think its
>
> boot /whatever/efs/vmlinux root=/dev/sdb1
>
> (first partition disk 2 as root)
I know this method, my want to boot from local disk is, I've not installed
all rpm packages on the second disk. I'll do this until tomorrow.
Do you think anyone wants my installation howto?
--
Takeshi Hakamada
Nihon Silicon Graphics Cray
E-mail: hakamada@nsg.sgi.com, URL: http://reality.sgi.com/hakamada_nsg/
Phone: +81-45-682-3712, Fax: +81-45-682-0856
Voice mail: (internal)822-1300, (external)+81-3-5488-1863-1300
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Mount ext2 filesystem.
1997-12-12 1:16 ` Takeshi Hakamada
@ 1997-12-12 2:52 ` Andrew O'Brien
1997-12-15 12:53 ` Takeshi Hakamada
1997-12-12 15:04 ` Eric Kimminau
1 sibling, 1 reply; 13+ messages in thread
From: Andrew O'Brien @ 1997-12-12 2:52 UTC (permalink / raw)
To: linux
On Fri, 12 Dec 1997, Takeshi Hakamada wrote:
>
> > > Thank you. I've converted rpm to cpio and I could have installed rpm binary.
> > > But, I can't boot from local disk yet. If I can boot from local disk, I'd
> > > like to update faq on the www.linux.sgi.com. How do you think about it?
> >
> > In irix, shutdown, restart hit the maintenance button to get to the arc
> > menu, hit command line and do I think its
> >
> > boot /whatever/efs/vmlinux root=/dev/sdb1
> >
> > (first partition disk 2 as root)
>
> I know this method, my want to boot from local disk is, I've not installed
> all rpm packages on the second disk. I'll do this until tomorrow.
> Do you think anyone wants my installation howto?
Yep !
I'm a student at The University of NSW, Australia and over this summer
(yes it's summer now ;) I'll be undertaking to port Linux to a specialised
board developed here, which uses a R4{6,7}00 chip.
As a warmup exercise, as I've been given access to an Indy and brought in
my home Linux x86 box as a bootserver, I'll try and install SGI/Linux. The
only prob is that I've never used/played with an SGI before and so would
appreciate a slightly more comprehensive howto then the FAQ.
I've been lurking in the background the last few days and this seems like
an appropriate time to say "Hi".
Any hints or tips anyone could send me would be much appreciated.
Thanks
___________________________________________________________________
/ Andrew O'Brien andrewo@cse.unsw.edu.au bbq@mindless.com \
/ Student, Faculty of CSE http://www.cse.unsw.edu.au/~andrewo \
> UNSW, Australia President COMPSOC http://www/~compsoc <
\ BE (Comp)/BA (Psych) Student Representative stu-reps@cse.. /
\___ "finger -l andrewo@cse.unsw.edu.au" for my current location ___/
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Mount ext2 filesystem.
1997-12-12 1:16 ` Takeshi Hakamada
1997-12-12 2:52 ` Andrew O'Brien
@ 1997-12-12 15:04 ` Eric Kimminau
1 sibling, 0 replies; 13+ messages in thread
From: Eric Kimminau @ 1997-12-12 15:04 UTC (permalink / raw)
To: Takeshi Hakamada; +Cc: alan, linux
YES! :)
Takeshi Hakamada wrote:
>
> > > Thank you. I've converted rpm to cpio and I could have installed rpm binary.
> > > But, I can't boot from local disk yet. If I can boot from local disk, I'd
> > > like to update faq on the www.linux.sgi.com. How do you think about it?
> >
> > In irix, shutdown, restart hit the maintenance button to get to the arc
> > menu, hit command line and do I think its
> >
> > boot /whatever/efs/vmlinux root=/dev/sdb1
> >
> > (first partition disk 2 as root)
>
> I know this method, my want to boot from local disk is, I've not installed
> all rpm packages on the second disk. I'll do this until tomorrow.
> Do you think anyone wants my installation howto?
>
> --
> Takeshi Hakamada
> Nihon Silicon Graphics Cray
> E-mail: hakamada@nsg.sgi.com, URL: http://reality.sgi.com/hakamada_nsg/
> Phone: +81-45-682-3712, Fax: +81-45-682-0856
> Voice mail: (internal)822-1300, (external)+81-3-5488-1863-1300
--
Eric Kimminau System Engineer/RSA
eak@detroit.sgi.com Silicon Graphics, Inc
Voice: (248) 848-4455 39001 West 12 Mile Rd.
Fax: (248) 848-5600 Farmington, MI 48331-2903
VNet Extension - 6-327-4455
"I speak my mind and no one else's."
http://www.dcs.ex.ac.uk/~aba/rsa/perl-rsa-sig.html
When confronted by a difficult problem, solve it by reducing
it to the question, "How would the Lone Ranger handle this?"
"I am the great supportfolio, do you have http?"
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Mount ext2 filesystem.
1997-12-12 2:52 ` Andrew O'Brien
@ 1997-12-15 12:53 ` Takeshi Hakamada
0 siblings, 0 replies; 13+ messages in thread
From: Takeshi Hakamada @ 1997-12-15 12:53 UTC (permalink / raw)
To: andrewo; +Cc: linux
> As a warmup exercise, as I've been given access to an Indy and brought in
> my home Linux x86 box as a bootserver, I'll try and install SGI/Linux. The
> only prob is that I've never used/played with an SGI before and so would
> appreciate a slightly more comprehensive howto then the FAQ.
>
> I've been lurking in the background the last few days and this seems like
> an appropriate time to say "Hi".
>
> Any hints or tips anyone could send me would be much appreciated.
Eventually, I've booted SGI/Linux from local disk.
However, my e2fs partition(super block) has been corrupted,
I'll re-mke2fs and reinstall rpm stuff on the local disk.
I'm also preparing for Installation howto or FAQ.
Thanks,
--
Takeshi Hakamada
Nihon Silicon Graphics Cray
E-mail: hakamada@nsg.sgi.com, URL: http://reality.sgi.com/hakamada_nsg/
Phone: +81-45-682-3712, Fax: +81-45-682-0856
Voice mail: (internal)822-1300, (external)+81-3-5488-1863-1300
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~1997-12-15 12:54 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
1997-12-10 13:35 Mount ext2 filesystem Takeshi Hakamada
1997-12-10 16:43 ` Alex deVries
1997-12-10 17:11 ` ralf
1997-12-10 17:02 ` ralf
1997-12-10 22:43 ` Alan Cox
1997-12-10 22:43 ` Alan Cox
1997-12-12 0:30 ` Takeshi Hakamada
1997-12-12 1:11 ` Alan Cox
1997-12-12 1:11 ` Alan Cox
1997-12-12 1:16 ` Takeshi Hakamada
1997-12-12 2:52 ` Andrew O'Brien
1997-12-15 12:53 ` Takeshi Hakamada
1997-12-12 15:04 ` Eric Kimminau
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox