* More on modules...
@ 1998-01-27 0:45 Alex deVries
1998-01-27 1:51 ` William J. Earl
0 siblings, 1 reply; 4+ messages in thread
From: Alex deVries @ 1998-01-27 0:45 UTC (permalink / raw)
To: SGI Linux
The modutils in the CVS appears to work; I'll get an RPM out tonight for
others.
But, I use the term 'work' with a grain of salt; the modules appear to
load, but I get errors like:
Illegal instruction at c000c0d0 ra=88034ed4
Unable to handle kernel paging request at virtual address c0008113, epc ==
c000c0d8, ra == 88034ed4
Killed
- A
--
Alex deVries Run Linux on everything,
System Administrator run everything on Linux.
The EngSoc Project Send spam to spam@engsoc.carleton.ca.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: More on modules...
1998-01-27 0:45 More on modules Alex deVries
@ 1998-01-27 1:51 ` William J. Earl
1998-01-27 6:41 ` ralf
0 siblings, 1 reply; 4+ messages in thread
From: William J. Earl @ 1998-01-27 1:51 UTC (permalink / raw)
To: Alex deVries; +Cc: SGI Linux
Alex deVries writes:
>
> The modutils in the CVS appears to work; I'll get an RPM out tonight for
> others.
>
> But, I use the term 'work' with a grain of salt; the modules appear to
> load, but I get errors like:
> Illegal instruction at c000c0d0 ra=88034ed4
> Unable to handle kernel paging request at virtual address c0008113, epc ==
> c000c0d8, ra == 88034ed4
> Killed
...
I wonder if the kernel is properly synchronzing the I-cache with
the D-cache after loading the module. In general, you need to
writeback the primary D-cache and invalidate the primary I-cache for
the range of addresses occupied by the driver (or simply
index-writeback-invalidate all of the D-cache and index-invalidate all
of the I-cache, if the driver is larger than the cache size).
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: More on modules...
1998-01-27 1:51 ` William J. Earl
@ 1998-01-27 6:41 ` ralf
1998-01-27 8:05 ` Alex deVries
0 siblings, 1 reply; 4+ messages in thread
From: ralf @ 1998-01-27 6:41 UTC (permalink / raw)
To: William J. Earl; +Cc: Alex deVries, SGI Linux
On Mon, Jan 26, 1998 at 05:51:40PM -0800, William J. Earl wrote:
> > But, I use the term 'work' with a grain of salt; the modules appear to
> > load, but I get errors like:
> > Illegal instruction at c000c0d0 ra=88034ed4
> > Unable to handle kernel paging request at virtual address c0008113, epc ==
> > c000c0d8, ra == 88034ed4
> > Killed
> ...
>
> I wonder if the kernel is properly synchronzing the I-cache with
> the D-cache after loading the module. In general, you need to
> writeback the primary D-cache and invalidate the primary I-cache for
> the range of addresses occupied by the driver (or simply
> index-writeback-invalidate all of the D-cache and index-invalidate all
> of the I-cache, if the driver is larger than the cache size).
Yes, we do that properly.
Alex, when compiling modules, does the compiler pass the flag -mlong-jumps?
Ralf
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: More on modules...
1998-01-27 6:41 ` ralf
@ 1998-01-27 8:05 ` Alex deVries
0 siblings, 0 replies; 4+ messages in thread
From: Alex deVries @ 1998-01-27 8:05 UTC (permalink / raw)
To: ralf; +Cc: William J. Earl, SGI Linux
On Tue, 27 Jan 1998 ralf@uni-koblenz.de wrote:
> On Mon, Jan 26, 1998 at 05:51:40PM -0800, William J. Earl wrote:
> > I wonder if the kernel is properly synchronzing the I-cache with
> > the D-cache after loading the module. In general, you need to
> > writeback the primary D-cache and invalidate the primary I-cache for
> > the range of addresses occupied by the driver (or simply
> > index-writeback-invalidate all of the D-cache and index-invalidate all
> > of the I-cache, if the driver is larger than the cache size).
>
> Yes, we do that properly.
> Alex, when compiling modules, does the compiler pass the flag -mlong-jumps?
No, but it does compile them with -mlong-calls.
- Alex "damned insomnia" deVries
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~1998-01-27 8:09 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
1998-01-27 0:45 More on modules Alex deVries
1998-01-27 1:51 ` William J. Earl
1998-01-27 6:41 ` ralf
1998-01-27 8:05 ` Alex deVries
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox