From: Honza Pazdziora <adelton@informatics.muni.cz>
To: adevries@engsoc.carleton.ca (Alex deVries)
Cc: linux@cthulhu.engr.sgi.com
Subject: Re: RedHat 5.1 (Manhattan) ALPHA 1 for SGI/Indys
Date: Tue, 16 Jun 1998 17:46:06 +0200 (MET DST) [thread overview]
Message-ID: <199806161546.RAA28259@aisa.fi.muni.cz> (raw)
In-Reply-To: <Pine.LNX.3.95.980614004054.27426A-100000@lager.engsoc.carleton.ca> from Alex deVries at "Jun 14, 98 00:44:23 am"
>
> 6. Last, but not least
>
> Let us know if it worked!
Great! It worked. I mean: it worked!
I've installed it from our mirror at ftp.fi.muni.cz to an old 300 MB
disk. After some fiddling with the ftp server to support tftp
correctly and after one crash with some message about signal 11
(caused by the disk, I believe) it's now installed and running.
Some comments out of my head:
The /usr/sbin/timeconfig failed in the menu -- it doesn't seem to be
present in the installfs -- shall I find and compile it?
I've set up root password in the menu but it wasn't there after
reboot -- not even /etc/passwd -- I had to boot init=/bin/bash.
I had to install gcc from RH 5.0.
Mkswap failed with segmantation fault -- shall I send the register
output? I will try to compile my own, but the machine is slow without
swap, and I need to compile ssh first to get reasonable remote access.
Once this is done, we might be able to provide ssh*.mips.rpm, if you
are interested.
It might be nice to put the notice about this 5.1 on the web, so that
people are directed to the new stuff -- even this, plain text announce
and instructions would be nice.
As I have the system on a disk, it's much happier and it starts to
look really reasonably. I will boot my machine to Linux and run the
compilations of ssh and linux-utils (for mkswap) overnight. If there
is anything I can compile/test/do to help you, please let me know.
------------------------------------------------------------------------
Honza Pazdziora | adelton@fi.muni.cz | http://www.fi.muni.cz/~adelton/
I can take or leave it if I please
------------------------------------------------------------------------
WARNING: multiple messages have this Message-ID (diff)
From: Honza Pazdziora <adelton@informatics.muni.cz>
To: Alex deVries <adevries@engsoc.carleton.ca>
Cc: linux@cthulhu.engr.sgi.com
Subject: Re: RedHat 5.1 (Manhattan) ALPHA 1 for SGI/Indys
Date: Tue, 16 Jun 1998 17:46:06 +0200 (MET DST) [thread overview]
Message-ID: <199806161546.RAA28259@aisa.fi.muni.cz> (raw)
Message-ID: <19980616154606.BRkAAR9Cgo6unU8hH1NwikPsyl_TK0OSG2s6BLFr6sw@z> (raw)
In-Reply-To: <Pine.LNX.3.95.980614004054.27426A-100000@lager.engsoc.carleton.ca> from Alex deVries at "Jun 14, 98 00:44:23 am"
>
> 6. Last, but not least
>
> Let us know if it worked!
Great! It worked. I mean: it worked!
I've installed it from our mirror at ftp.fi.muni.cz to an old 300 MB
disk. After some fiddling with the ftp server to support tftp
correctly and after one crash with some message about signal 11
(caused by the disk, I believe) it's now installed and running.
Some comments out of my head:
The /usr/sbin/timeconfig failed in the menu -- it doesn't seem to be
present in the installfs -- shall I find and compile it?
I've set up root password in the menu but it wasn't there after
reboot -- not even /etc/passwd -- I had to boot init=/bin/bash.
I had to install gcc from RH 5.0.
Mkswap failed with segmantation fault -- shall I send the register
output? I will try to compile my own, but the machine is slow without
swap, and I need to compile ssh first to get reasonable remote access.
Once this is done, we might be able to provide ssh*.mips.rpm, if you
are interested.
It might be nice to put the notice about this 5.1 on the web, so that
people are directed to the new stuff -- even this, plain text announce
and instructions would be nice.
As I have the system on a disk, it's much happier and it starts to
look really reasonably. I will boot my machine to Linux and run the
compilations of ssh and linux-utils (for mkswap) overnight. If there
is anything I can compile/test/do to help you, please let me know.
------------------------------------------------------------------------
Honza Pazdziora | adelton@fi.muni.cz | http://www.fi.muni.cz/~adelton/
I can take or leave it if I please
------------------------------------------------------------------------
next prev parent reply other threads:[~1998-06-16 15:47 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
1998-06-14 4:44 RedHat 5.1 (Manhattan) ALPHA 1 for SGI/Indys Alex deVries
1998-06-16 15:46 ` Honza Pazdziora [this message]
1998-06-16 15:46 ` Honza Pazdziora
1998-06-16 16:07 ` Alex deVries
1998-06-16 18:25 ` Honza Pazdziora
1998-06-16 18:25 ` Honza Pazdziora
1998-06-24 13:04 ` Daniel Veillard
1998-06-24 19:22 ` Alex deVries
1998-07-09 13:17 ` Lmbench for RH 5.1 Honza Pazdziora
1998-07-09 13:39 ` ralf
1998-07-09 13:47 ` Honza Pazdziora
1998-07-09 13:53 ` ralf
1998-07-09 16:06 ` Ulf Carlsson
1998-06-16 20:25 ` RedHat 5.1 (Manhattan) ALPHA 1 for SGI/Indys Tomi Leppikangas
1998-06-18 0:28 ` Alex deVries
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=199806161546.RAA28259@aisa.fi.muni.cz \
--to=adelton@informatics.muni.cz \
--cc=adevries@engsoc.carleton.ca \
--cc=linux@cthulhu.engr.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox