Linux MIPS Architecture development
 help / color / mirror / Atom feed
From: Honza Pazdziora <adelton@informatics.muni.cz>
To: adevries@engsoc.carleton.ca (Alex deVries)
Cc: adelton@informatics.muni.cz, linux@cthulhu.engr.sgi.com
Subject: Re: RedHat 5.1 (Manhattan) ALPHA 1 for SGI/Indys
Date: Tue, 16 Jun 1998 20:25:48 +0200 (MET DST)	[thread overview]
Message-ID: <199806161825.UAA05307@aisa.fi.muni.cz> (raw)
In-Reply-To: <Pine.LNX.3.95.980616120211.26590B-100000@lager.engsoc.carleton.ca> from Alex deVries at "Jun 16, 98 12:07:58 pm"

> 
> > I've set up root password in the menu but it wasn't there after
> > reboot -- not even /etc/passwd -- I had to boot init=/bin/bash.
> 
> Do you mean that /etc/passwd didn't exist at all?

Right. I can repeat the installation from the scratch tomorrow and
have closer look at the other consoles. But neither passwd, nor shadow
existed.

> Do you mean that mkswap segfaulted during install, or after?  I'll have a
> closer look.  The util-linux we're using is a little old.

I'm not sure what happened during install -- I just wanted to have it
done to see the real prompt ;-) But when I tried mkswap /dev/sdb2 on
the prompt, it said something about freeing free buffer? (or whatever)
and then gave register dump. Sorry, I'm at home and can't get to the
machine because sshd isn't running there yet, so I will send the exact
output tomorrow.

> We actually already have ssh on ftp.replay.com, IIRC.  I'm in the US
> (sigh...) so I can't export it.

No problem, I thing we can add mips.rpm to out ssh mirror.

> If you were interested, you could have a look at getting a util-linux RPM
> up to version 2.8.  util-linux is a gross thing.

OK, I'll try.

------------------------------------------------------------------------
 Honza Pazdziora | adelton@fi.muni.cz | http://www.fi.muni.cz/~adelton/
                   I can take or leave it if I please
------------------------------------------------------------------------

WARNING: multiple messages have this Message-ID (diff)
From: Honza Pazdziora <adelton@informatics.muni.cz>
To: Alex deVries <adevries@engsoc.carleton.ca>
Cc: adelton@informatics.muni.cz, linux@cthulhu.engr.sgi.com
Subject: Re: RedHat 5.1 (Manhattan) ALPHA 1 for SGI/Indys
Date: Tue, 16 Jun 1998 20:25:48 +0200 (MET DST)	[thread overview]
Message-ID: <199806161825.UAA05307@aisa.fi.muni.cz> (raw)
Message-ID: <19980616182548.ffTs8-BloW5RHMyzK9w9m5FBi2qOBpf-pQWm5DtS0ZM@z> (raw)
In-Reply-To: <Pine.LNX.3.95.980616120211.26590B-100000@lager.engsoc.carleton.ca> from Alex deVries at "Jun 16, 98 12:07:58 pm"

> 
> > I've set up root password in the menu but it wasn't there after
> > reboot -- not even /etc/passwd -- I had to boot init=/bin/bash.
> 
> Do you mean that /etc/passwd didn't exist at all?

Right. I can repeat the installation from the scratch tomorrow and
have closer look at the other consoles. But neither passwd, nor shadow
existed.

> Do you mean that mkswap segfaulted during install, or after?  I'll have a
> closer look.  The util-linux we're using is a little old.

I'm not sure what happened during install -- I just wanted to have it
done to see the real prompt ;-) But when I tried mkswap /dev/sdb2 on
the prompt, it said something about freeing free buffer? (or whatever)
and then gave register dump. Sorry, I'm at home and can't get to the
machine because sshd isn't running there yet, so I will send the exact
output tomorrow.

> We actually already have ssh on ftp.replay.com, IIRC.  I'm in the US
> (sigh...) so I can't export it.

No problem, I thing we can add mips.rpm to out ssh mirror.

> If you were interested, you could have a look at getting a util-linux RPM
> up to version 2.8.  util-linux is a gross thing.

OK, I'll try.

------------------------------------------------------------------------
 Honza Pazdziora | adelton@fi.muni.cz | http://www.fi.muni.cz/~adelton/
                   I can take or leave it if I please
------------------------------------------------------------------------

  reply	other threads:[~1998-06-16 18:27 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
1998-06-14  4:44 RedHat 5.1 (Manhattan) ALPHA 1 for SGI/Indys Alex deVries
1998-06-16 15:46 ` Honza Pazdziora
1998-06-16 15:46   ` Honza Pazdziora
1998-06-16 16:07   ` Alex deVries
1998-06-16 18:25     ` Honza Pazdziora [this message]
1998-06-16 18:25       ` Honza Pazdziora
1998-06-24 13:04     ` Daniel Veillard
1998-06-24 19:22       ` Alex deVries
1998-07-09 13:17       ` Lmbench for RH 5.1 Honza Pazdziora
1998-07-09 13:39         ` ralf
1998-07-09 13:47           ` Honza Pazdziora
1998-07-09 13:53             ` ralf
1998-07-09 16:06               ` Ulf Carlsson
1998-06-16 20:25 ` RedHat 5.1 (Manhattan) ALPHA 1 for SGI/Indys Tomi Leppikangas
1998-06-18  0:28   ` Alex deVries

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=199806161825.UAA05307@aisa.fi.muni.cz \
    --to=adelton@informatics.muni.cz \
    --cc=adevries@engsoc.carleton.ca \
    --cc=linux@cthulhu.engr.sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox