* supported systems running on 2.6 ?
@ 2003-12-30 14:49 Dimitri Torfs
2003-12-30 15:17 ` Yoichi Yuasa
2003-12-30 16:08 ` ilya
0 siblings, 2 replies; 6+ messages in thread
From: Dimitri Torfs @ 2003-12-30 14:49 UTC (permalink / raw)
To: linux-mips
Hi,
are there already MIPS systems running on 2.6.0 ? If so, which ones
? I'm currently porting a VR41xx based configuration from 2.4.24 to
2.6.0: boot sequence seems to be OK, but the init process doesn't
come up (it looks like its not properly laid out in memory, thus
continuously generating exceptions (do_signal()) ...). Is it too
soon to expect it to work ?
Dimitri
--
Dimitri Torfs | NSCE
dimitri.torfs@sonycom.com | Sint Stevens Woluwestraat 55
tel: +32 2 2908451 | 1130 Brussel
fax: +32 2 7262686 | Belgium
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: supported systems running on 2.6 ?
2003-12-30 14:49 supported systems running on 2.6 ? Dimitri Torfs
@ 2003-12-30 15:17 ` Yoichi Yuasa
2003-12-30 15:43 ` Dimitri Torfs
2003-12-30 16:08 ` ilya
1 sibling, 1 reply; 6+ messages in thread
From: Yoichi Yuasa @ 2003-12-30 15:17 UTC (permalink / raw)
To: Dimitri Torfs; +Cc: yuasa, linux-mips
On Tue, 30 Dec 2003 15:49:04 +0100
Dimitri Torfs <dimitri@sonycom.com> wrote:
> Hi,
>
> are there already MIPS systems running on 2.6.0 ? If so, which ones
> ? I'm currently porting a VR41xx based configuration from 2.4.24 to
> 2.6.0: boot sequence seems to be OK, but the init process doesn't
> come up (it looks like its not properly laid out in memory, thus
> continuously generating exceptions (do_signal()) ...). Is it too
> soon to expect it to work ?
Which Vr41xx's configuration did you use?
Yoichi
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: supported systems running on 2.6 ?
2003-12-30 15:17 ` Yoichi Yuasa
@ 2003-12-30 15:43 ` Dimitri Torfs
2003-12-30 17:10 ` Yoichi Yuasa
0 siblings, 1 reply; 6+ messages in thread
From: Dimitri Torfs @ 2003-12-30 15:43 UTC (permalink / raw)
To: Yoichi Yuasa; +Cc: linux-mips
On Wed, Dec 31, 2003 at 12:17:01AM +0900, Yoichi Yuasa wrote:
> On Tue, 30 Dec 2003 15:49:04 +0100
> Dimitri Torfs <dimitri@sonycom.com> wrote:
>
> > Hi,
> >
> > are there already MIPS systems running on 2.6.0 ? If so, which ones
> > ? I'm currently porting a VR41xx based configuration from 2.4.24 to
> > 2.6.0: boot sequence seems to be OK, but the init process doesn't
> > come up (it looks like its not properly laid out in memory, thus
> > continuously generating exceptions (do_signal()) ...). Is it too
> > soon to expect it to work ?
>
> Which Vr41xx's configuration did you use?
None of the default ones in the tree, it's not a board listed in the
configs (the board has a VR4120A and a VR4131 cpu). I'm currently
using a configuration with CONFIG_EMBEDDED_RAMDISK set and
CONFIG_MACH_VR41XX.
Is there a working config with a VR41xx on 2.6.0 ? It would surprise
me since I had to do some fixes for the VR41xx series (for some I
already sent a patch) which seem to indicate the VR41xx specifics have
not yet been actively looked at for 2.6.0 (although I know you
have been submitting patches for the Vr41xx).
Dimitri
--
Dimitri Torfs | NSCE
dimitri.torfs@sonycom.com | Sint Stevens Woluwestraat 55
tel: +32 2 2908451 | 1130 Brussel
fax: +32 2 7262686 | Belgium
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: supported systems running on 2.6 ?
2003-12-30 15:43 ` Dimitri Torfs
@ 2003-12-30 17:10 ` Yoichi Yuasa
0 siblings, 0 replies; 6+ messages in thread
From: Yoichi Yuasa @ 2003-12-30 17:10 UTC (permalink / raw)
To: Dimitri Torfs; +Cc: yuasa, linux-mips
On Tue, 30 Dec 2003 16:43:36 +0100
Dimitri Torfs <dimitri@sonycom.com> wrote:
> On Wed, Dec 31, 2003 at 12:17:01AM +0900, Yoichi Yuasa wrote:
> > On Tue, 30 Dec 2003 15:49:04 +0100
> > Dimitri Torfs <dimitri@sonycom.com> wrote:
> >
> > > Hi,
> > >
> > > are there already MIPS systems running on 2.6.0 ? If so, which ones
> > > ? I'm currently porting a VR41xx based configuration from 2.4.24 to
> > > 2.6.0: boot sequence seems to be OK, but the init process doesn't
> > > come up (it looks like its not properly laid out in memory, thus
> > > continuously generating exceptions (do_signal()) ...). Is it too
> > > soon to expect it to work ?
> >
> > Which Vr41xx's configuration did you use?
>
> None of the default ones in the tree, it's not a board listed in the
> configs (the board has a VR4120A and a VR4131 cpu). I'm currently
> using a configuration with CONFIG_EMBEDDED_RAMDISK set and
> CONFIG_MACH_VR41XX.
>
> Is there a working config with a VR41xx on 2.6.0 ? It would surprise
> me since I had to do some fixes for the VR41xx series (for some I
> already sent a patch) which seem to indicate the VR41xx specifics have
> not yet been actively looked at for 2.6.0 (although I know you
> have been submitting patches for the Vr41xx).
About 2.6 of linux-mips, development progressed quickly
several of these months.
Therefore, we are not completing Vr41xx about 2.6.
Yoichi
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: supported systems running on 2.6 ?
2003-12-30 14:49 supported systems running on 2.6 ? Dimitri Torfs
2003-12-30 15:17 ` Yoichi Yuasa
@ 2003-12-30 16:08 ` ilya
2003-12-30 16:17 ` Dimitri Torfs
1 sibling, 1 reply; 6+ messages in thread
From: ilya @ 2003-12-30 16:08 UTC (permalink / raw)
To: Dimitri Torfs; +Cc: linux-mips
Are you trying 2.6.0 from linux-mips.org CVS?
If so, make sure it is no earlier then from yesterday. There was
non-CPU specific bug that was just fixed.
For reference: I have R212K-based SGI O2 running almost stable with
2.6.0. R5K O2's also boot, but show random segfaults and oopses, but
I still do not know what exactly is the reason for that.
Ilya.
On Tue, Dec 30, 2003 at 03:49:04PM +0100, Dimitri Torfs wrote:
> Hi,
>
> are there already MIPS systems running on 2.6.0 ? If so, which ones
> ? I'm currently porting a VR41xx based configuration from 2.4.24 to
> 2.6.0: boot sequence seems to be OK, but the init process doesn't
> come up (it looks like its not properly laid out in memory, thus
> continuously generating exceptions (do_signal()) ...). Is it too
> soon to expect it to work ?
>
> Dimitri
>
> --
> Dimitri Torfs | NSCE
> dimitri.torfs@sonycom.com | Sint Stevens Woluwestraat 55
> tel: +32 2 2908451 | 1130 Brussel
> fax: +32 2 7262686 | Belgium
>
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: supported systems running on 2.6 ?
2003-12-30 16:08 ` ilya
@ 2003-12-30 16:17 ` Dimitri Torfs
0 siblings, 0 replies; 6+ messages in thread
From: Dimitri Torfs @ 2003-12-30 16:17 UTC (permalink / raw)
To: ilya; +Cc: linux-mips
On Tue, Dec 30, 2003 at 08:08:08AM -0800, ilya@theIlya.com wrote:
> Are you trying 2.6.0 from linux-mips.org CVS?
Yep.
> If so, make sure it is no earlier then from yesterday. There was
> non-CPU specific bug that was just fixed.
Ok, will update.
>
> For reference: I have R212K-based SGI O2 running almost stable with
> 2.6.0. R5K O2's also boot, but show random segfaults and oopses, but
> I still do not know what exactly is the reason for that.
>
Thanks for the info,
Dimitri
--
Dimitri Torfs | NSCE
dimitri.torfs@sonycom.com | Sint Stevens Woluwestraat 55
tel: +32 2 2908451 | 1130 Brussel
fax: +32 2 7262686 | Belgium
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2003-12-30 17:10 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-12-30 14:49 supported systems running on 2.6 ? Dimitri Torfs
2003-12-30 15:17 ` Yoichi Yuasa
2003-12-30 15:43 ` Dimitri Torfs
2003-12-30 17:10 ` Yoichi Yuasa
2003-12-30 16:08 ` ilya
2003-12-30 16:17 ` Dimitri Torfs
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox