[PATCH 3.10 19/71] MIPS: GIC: Prevent array overrun

[PATCH 3.10 19/71] MIPS: GIC: Prevent array overrun

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeffrey Deans <jeffrey.deans@imgtec.com>

commit ffc8415afab20bd97754efae6aad1f67b531132b upstream.

A GIC interrupt which is declared as having a GIC_MAP_TO_NMI_MSK
mapping causes the cpu parameter to gic_setup_intr() to be increased
to 32, causing memory corruption when pcpu_masks[] is written to again
later in the function.

Signed-off-by: Jeffrey Deans <jeffrey.deans@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7375/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/irq-gic.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/arch/mips/kernel/irq-gic.c
+++ b/arch/mips/kernel/irq-gic.c
@@ -256,11 +256,13 @@ static void __init gic_setup_intr(unsign
 
 	/* Setup Intr to Pin mapping */
 	if (pin & GIC_MAP_TO_NMI_MSK) {
+		int i;
+
 		GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_MAP_TO_PIN(intr)), pin);
 		/* FIXME: hack to route NMI to all cpu's */
-		for (cpu = 0; cpu < NR_CPUS; cpu += 32) {
+		for (i = 0; i < NR_CPUS; i += 32) {
 			GICWRITE(GIC_REG_ADDR(SHARED,
-					  GIC_SH_MAP_TO_VPE_REG_OFF(intr, cpu)),
+					  GIC_SH_MAP_TO_VPE_REG_OFF(intr, i)),
 				 0xffffffff);
 		}
 	} else {

[PATCH 3.10 20/71] MIPS: Prevent user from setting FCSR cause bits

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Burton <paul.burton@imgtec.com>

commit b1442d39fac2fcfbe6a4814979020e993ca59c9e upstream.

If one or more matching FCSR cause & enable bits are set in saved thread
context then when that context is restored the kernel will take an FP
exception. This is of course undesirable and considered an oops, leading
to the kernel writing a backtrace to the console and potentially
rebooting depending upon the configuration. Thus the kernel avoids this
situation by clearing the cause bits of the FCSR register when handling
FP exceptions and after emulating FP instructions.

However the kernel does not prevent userland from setting arbitrary FCSR
cause & enable bits via ptrace, using either the PTRACE_POKEUSR or
PTRACE_SETFPREGS requests. This means userland can trivially cause the
kernel to oops on any system with an FPU. Prevent this from happening
by clearing the cause bits when writing to the saved FCSR context via
ptrace.

This problem appears to exist at least back to the beginning of the git
era in the PTRACE_POKEUSR case.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7438/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/ptrace.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -161,6 +161,7 @@ int ptrace_setfpregs(struct task_struct
 		__get_user(fregs[i], i + (__u64 __user *) data);
 
 	__get_user(child->thread.fpu.fcr31, data + 64);
+	child->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X;
 
 	/* FIR may not be written.  */
 
@@ -451,7 +452,7 @@ long arch_ptrace(struct task_struct *chi
 			break;
 #endif
 		case FPC_CSR:
-			child->thread.fpu.fcr31 = data;
+			child->thread.fpu.fcr31 = data & ~FPU_CSR_ALL_X;
 			break;
 		case DSP_BASE ... DSP_BASE + 5: {
 			dspreg_t *dregs;

[PATCH 3.10 21/71] MIPS: tlbex: Fix a missing statement for HUGETLB

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Huacai Chen <chenhc@lemote.com>

commit 8393c524a25609a30129e4a8975cf3b91f6c16a5 upstream.

In commit 2c8c53e28f1 (MIPS: Optimize TLB handlers for Octeon CPUs)
build_r4000_tlb_refill_handler() is modified. But it doesn't compatible
with the original code in HUGETLB case. Because there is a copy & paste
error and one line of code is missing. It is very easy to produce a bug
with LTP's hugemmap05 test.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Binbin Zhou <zhoubb@lemote.com>
Cc: John Crispin <john@phrozen.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/7496/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/mm/tlbex.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -1329,6 +1329,7 @@ static void __cpuinit build_r4000_tlb_re
 	}
 #ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
 	uasm_l_tlb_huge_update(&l, p);
+	UASM_i_LW(&p, K0, 0, K1);
 	build_huge_update_entries(&p, htlb_info.huge_pte, K1);
 	build_huge_tlb_write_entry(&p, &l, &r, K0, tlb_random,
 				   htlb_info.restore_scratch);

[PATCH 3.10 22/71] MIPS: Remove BUG_ON(!is_fpu_owner()) in do_ade()

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Huacai Chen <chenhc@lemote.com>

commit 2e5767a27337812f6850b3fa362419e2f085e5c3 upstream.

In do_ade(), is_fpu_owner() isn't preempt-safe. For example, when an
unaligned ldc1 is executed, do_cpu() is called and then FPU will be
enabled (and TIF_USEDFPU will be set for the current process). Then,
do_ade() is called because the access is unaligned.  If the current
process is preempted at this time, TIF_USEDFPU will be cleard.  So when
the process is scheduled again, BUG_ON(!is_fpu_owner()) is triggered.

This small program can trigger this BUG in a preemptible kernel:

int main (int argc, char *argv[])
{
        double u64[2];

        while (1) {
                asm volatile (
                        ".set push \n\t"
                        ".set noreorder \n\t"
                        "ldc1 $f3, 4(%0) \n\t"
                        ".set pop \n\t"
                        ::"r"(u64):
                );
        }

        return 0;
}

V2: Remove the BUG_ON() unconditionally due to Paul's suggestion.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Jie Chen <chenj@lemote.com>
Signed-off-by: Rui Wang <wangr@lemote.com>
Cc: John Crispin <john@phrozen.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/unaligned.c |    1 -
 1 file changed, 1 deletion(-)

--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -604,7 +604,6 @@ static void emulate_load_store_insn(stru
 	case sdc1_op:
 		die_if_kernel("Unaligned FP access in kernel code", regs);
 		BUG_ON(!used_math());
-		BUG_ON(!is_fpu_owner());
 
 		lose_fpu(1);	/* Save FPU state for the emulator. */
 		res = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,

[PATCH 3.10 23/71] MIPS: asm/reg.h: Make 32- and 64-bit definitions available at the same time

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Smith <alex@alex-smith.me.uk>

commit bcec7c8da6b092b1ff3327fd83c2193adb12f684 upstream.

Get rid of the WANT_COMPAT_REG_H test and instead define both the 32-
and 64-bit register offset definitions at the same time with
MIPS{32,64}_ prefixes, then define the existing EF_* names to the
correct definitions for the kernel's bitness.

This patch is a prerequisite of the following bug fix patch.

Signed-off-by: Alex Smith <alex@alex-smith.me.uk>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7451/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/include/asm/reg.h      |  256 +++++++++++++++++++++++++--------------
 arch/mips/kernel/binfmt_elfo32.c |   32 +---
 2 files changed, 180 insertions(+), 108 deletions(-)

--- a/arch/mips/include/asm/reg.h
+++ b/arch/mips/include/asm/reg.h
@@ -12,116 +12,194 @@
 #ifndef __ASM_MIPS_REG_H
 #define __ASM_MIPS_REG_H
 
-
-#if defined(CONFIG_32BIT) || defined(WANT_COMPAT_REG_H)
-
-#define EF_R0			6
-#define EF_R1			7
-#define EF_R2			8
-#define EF_R3			9
-#define EF_R4			10
-#define EF_R5			11
-#define EF_R6			12
-#define EF_R7			13
-#define EF_R8			14
-#define EF_R9			15
-#define EF_R10			16
-#define EF_R11			17
-#define EF_R12			18
-#define EF_R13			19
-#define EF_R14			20
-#define EF_R15			21
-#define EF_R16			22
-#define EF_R17			23
-#define EF_R18			24
-#define EF_R19			25
-#define EF_R20			26
-#define EF_R21			27
-#define EF_R22			28
-#define EF_R23			29
-#define EF_R24			30
-#define EF_R25			31
+#define MIPS32_EF_R0		6
+#define MIPS32_EF_R1		7
+#define MIPS32_EF_R2		8
+#define MIPS32_EF_R3		9
+#define MIPS32_EF_R4		10
+#define MIPS32_EF_R5		11
+#define MIPS32_EF_R6		12
+#define MIPS32_EF_R7		13
+#define MIPS32_EF_R8		14
+#define MIPS32_EF_R9		15
+#define MIPS32_EF_R10		16
+#define MIPS32_EF_R11		17
+#define MIPS32_EF_R12		18
+#define MIPS32_EF_R13		19
+#define MIPS32_EF_R14		20
+#define MIPS32_EF_R15		21
+#define MIPS32_EF_R16		22
+#define MIPS32_EF_R17		23
+#define MIPS32_EF_R18		24
+#define MIPS32_EF_R19		25
+#define MIPS32_EF_R20		26
+#define MIPS32_EF_R21		27
+#define MIPS32_EF_R22		28
+#define MIPS32_EF_R23		29
+#define MIPS32_EF_R24		30
+#define MIPS32_EF_R25		31
 
 /*
  * k0/k1 unsaved
  */
-#define EF_R26			32
-#define EF_R27			33
+#define MIPS32_EF_R26		32
+#define MIPS32_EF_R27		33
 
-#define EF_R28			34
-#define EF_R29			35
-#define EF_R30			36
-#define EF_R31			37
+#define MIPS32_EF_R28		34
+#define MIPS32_EF_R29		35
+#define MIPS32_EF_R30		36
+#define MIPS32_EF_R31		37
 
 /*
  * Saved special registers
  */
-#define EF_LO			38
-#define EF_HI			39
+#define MIPS32_EF_LO		38
+#define MIPS32_EF_HI		39
 
-#define EF_CP0_EPC		40
-#define EF_CP0_BADVADDR		41
-#define EF_CP0_STATUS		42
-#define EF_CP0_CAUSE		43
-#define EF_UNUSED0		44
-
-#define EF_SIZE			180
-
-#endif
-
-#if defined(CONFIG_64BIT) && !defined(WANT_COMPAT_REG_H)
-
-#define EF_R0			 0
-#define EF_R1			 1
-#define EF_R2			 2
-#define EF_R3			 3
-#define EF_R4			 4
-#define EF_R5			 5
-#define EF_R6			 6
-#define EF_R7			 7
-#define EF_R8			 8
-#define EF_R9			 9
-#define EF_R10			10
-#define EF_R11			11
-#define EF_R12			12
-#define EF_R13			13
-#define EF_R14			14
-#define EF_R15			15
-#define EF_R16			16
-#define EF_R17			17
-#define EF_R18			18
-#define EF_R19			19
-#define EF_R20			20
-#define EF_R21			21
-#define EF_R22			22
-#define EF_R23			23
-#define EF_R24			24
-#define EF_R25			25
+#define MIPS32_EF_CP0_EPC	40
+#define MIPS32_EF_CP0_BADVADDR	41
+#define MIPS32_EF_CP0_STATUS	42
+#define MIPS32_EF_CP0_CAUSE	43
+#define MIPS32_EF_UNUSED0	44
+
+#define MIPS32_EF_SIZE		180
+
+#define MIPS64_EF_R0		0
+#define MIPS64_EF_R1		1
+#define MIPS64_EF_R2		2
+#define MIPS64_EF_R3		3
+#define MIPS64_EF_R4		4
+#define MIPS64_EF_R5		5
+#define MIPS64_EF_R6		6
+#define MIPS64_EF_R7		7
+#define MIPS64_EF_R8		8
+#define MIPS64_EF_R9		9
+#define MIPS64_EF_R10		10
+#define MIPS64_EF_R11		11
+#define MIPS64_EF_R12		12
+#define MIPS64_EF_R13		13
+#define MIPS64_EF_R14		14
+#define MIPS64_EF_R15		15
+#define MIPS64_EF_R16		16
+#define MIPS64_EF_R17		17
+#define MIPS64_EF_R18		18
+#define MIPS64_EF_R19		19
+#define MIPS64_EF_R20		20
+#define MIPS64_EF_R21		21
+#define MIPS64_EF_R22		22
+#define MIPS64_EF_R23		23
+#define MIPS64_EF_R24		24
+#define MIPS64_EF_R25		25
 
 /*
  * k0/k1 unsaved
  */
-#define EF_R26			26
-#define EF_R27			27
+#define MIPS64_EF_R26		26
+#define MIPS64_EF_R27		27
 
 
-#define EF_R28			28
-#define EF_R29			29
-#define EF_R30			30
-#define EF_R31			31
+#define MIPS64_EF_R28		28
+#define MIPS64_EF_R29		29
+#define MIPS64_EF_R30		30
+#define MIPS64_EF_R31		31
 
 /*
  * Saved special registers
  */
-#define EF_LO			32
-#define EF_HI			33
-
-#define EF_CP0_EPC		34
-#define EF_CP0_BADVADDR		35
-#define EF_CP0_STATUS		36
-#define EF_CP0_CAUSE		37
+#define MIPS64_EF_LO		32
+#define MIPS64_EF_HI		33
 
-#define EF_SIZE			304	/* size in bytes */
+#define MIPS64_EF_CP0_EPC	34
+#define MIPS64_EF_CP0_BADVADDR	35
+#define MIPS64_EF_CP0_STATUS	36
+#define MIPS64_EF_CP0_CAUSE	37
+
+#define MIPS64_EF_SIZE		304	/* size in bytes */
+
+#if defined(CONFIG_32BIT)
+
+#define EF_R0			MIPS32_EF_R0
+#define EF_R1			MIPS32_EF_R1
+#define EF_R2			MIPS32_EF_R2
+#define EF_R3			MIPS32_EF_R3
+#define EF_R4			MIPS32_EF_R4
+#define EF_R5			MIPS32_EF_R5
+#define EF_R6			MIPS32_EF_R6
+#define EF_R7			MIPS32_EF_R7
+#define EF_R8			MIPS32_EF_R8
+#define EF_R9			MIPS32_EF_R9
+#define EF_R10			MIPS32_EF_R10
+#define EF_R11			MIPS32_EF_R11
+#define EF_R12			MIPS32_EF_R12
+#define EF_R13			MIPS32_EF_R13
+#define EF_R14			MIPS32_EF_R14
+#define EF_R15			MIPS32_EF_R15
+#define EF_R16			MIPS32_EF_R16
+#define EF_R17			MIPS32_EF_R17
+#define EF_R18			MIPS32_EF_R18
+#define EF_R19			MIPS32_EF_R19
+#define EF_R20			MIPS32_EF_R20
+#define EF_R21			MIPS32_EF_R21
+#define EF_R22			MIPS32_EF_R22
+#define EF_R23			MIPS32_EF_R23
+#define EF_R24			MIPS32_EF_R24
+#define EF_R25			MIPS32_EF_R25
+#define EF_R26			MIPS32_EF_R26
+#define EF_R27			MIPS32_EF_R27
+#define EF_R28			MIPS32_EF_R28
+#define EF_R29			MIPS32_EF_R29
+#define EF_R30			MIPS32_EF_R30
+#define EF_R31			MIPS32_EF_R31
+#define EF_LO			MIPS32_EF_LO
+#define EF_HI			MIPS32_EF_HI
+#define EF_CP0_EPC		MIPS32_EF_CP0_EPC
+#define EF_CP0_BADVADDR		MIPS32_EF_CP0_BADVADDR
+#define EF_CP0_STATUS		MIPS32_EF_CP0_STATUS
+#define EF_CP0_CAUSE		MIPS32_EF_CP0_CAUSE
+#define EF_UNUSED0		MIPS32_EF_UNUSED0
+#define EF_SIZE			MIPS32_EF_SIZE
+
+#elif defined(CONFIG_64BIT)
+
+#define EF_R0			MIPS64_EF_R0
+#define EF_R1			MIPS64_EF_R1
+#define EF_R2			MIPS64_EF_R2
+#define EF_R3			MIPS64_EF_R3
+#define EF_R4			MIPS64_EF_R4
+#define EF_R5			MIPS64_EF_R5
+#define EF_R6			MIPS64_EF_R6
+#define EF_R7			MIPS64_EF_R7
+#define EF_R8			MIPS64_EF_R8
+#define EF_R9			MIPS64_EF_R9
+#define EF_R10			MIPS64_EF_R10
+#define EF_R11			MIPS64_EF_R11
+#define EF_R12			MIPS64_EF_R12
+#define EF_R13			MIPS64_EF_R13
+#define EF_R14			MIPS64_EF_R14
+#define EF_R15			MIPS64_EF_R15
+#define EF_R16			MIPS64_EF_R16
+#define EF_R17			MIPS64_EF_R17
+#define EF_R18			MIPS64_EF_R18
+#define EF_R19			MIPS64_EF_R19
+#define EF_R20			MIPS64_EF_R20
+#define EF_R21			MIPS64_EF_R21
+#define EF_R22			MIPS64_EF_R22
+#define EF_R23			MIPS64_EF_R23
+#define EF_R24			MIPS64_EF_R24
+#define EF_R25			MIPS64_EF_R25
+#define EF_R26			MIPS64_EF_R26
+#define EF_R27			MIPS64_EF_R27
+#define EF_R28			MIPS64_EF_R28
+#define EF_R29			MIPS64_EF_R29
+#define EF_R30			MIPS64_EF_R30
+#define EF_R31			MIPS64_EF_R31
+#define EF_LO			MIPS64_EF_LO
+#define EF_HI			MIPS64_EF_HI
+#define EF_CP0_EPC		MIPS64_EF_CP0_EPC
+#define EF_CP0_BADVADDR		MIPS64_EF_CP0_BADVADDR
+#define EF_CP0_STATUS		MIPS64_EF_CP0_STATUS
+#define EF_CP0_CAUSE		MIPS64_EF_CP0_CAUSE
+#define EF_SIZE			MIPS64_EF_SIZE
 
 #endif /* CONFIG_64BIT */
 
--- a/arch/mips/kernel/binfmt_elfo32.c
+++ b/arch/mips/kernel/binfmt_elfo32.c
@@ -58,12 +58,6 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_N
 
 #include <asm/processor.h>
 
-/*
- * When this file is selected, we are definitely running a 64bit kernel.
- * So using the right regs define in asm/reg.h
- */
-#define WANT_COMPAT_REG_H
-
 /* These MUST be defined before elf.h gets included */
 extern void elf32_core_copy_regs(elf_gregset_t grp, struct pt_regs *regs);
 #define ELF_CORE_COPY_REGS(_dest, _regs) elf32_core_copy_regs(_dest, _regs);
@@ -135,21 +129,21 @@ void elf32_core_copy_regs(elf_gregset_t
 {
 	int i;
 
-	for (i = 0; i < EF_R0; i++)
+	for (i = 0; i < MIPS32_EF_R0; i++)
 		grp[i] = 0;
-	grp[EF_R0] = 0;
+	grp[MIPS32_EF_R0] = 0;
 	for (i = 1; i <= 31; i++)
-		grp[EF_R0 + i] = (elf_greg_t) regs->regs[i];
-	grp[EF_R26] = 0;
-	grp[EF_R27] = 0;
-	grp[EF_LO] = (elf_greg_t) regs->lo;
-	grp[EF_HI] = (elf_greg_t) regs->hi;
-	grp[EF_CP0_EPC] = (elf_greg_t) regs->cp0_epc;
-	grp[EF_CP0_BADVADDR] = (elf_greg_t) regs->cp0_badvaddr;
-	grp[EF_CP0_STATUS] = (elf_greg_t) regs->cp0_status;
-	grp[EF_CP0_CAUSE] = (elf_greg_t) regs->cp0_cause;
-#ifdef EF_UNUSED0
-	grp[EF_UNUSED0] = 0;
+		grp[MIPS32_EF_R0 + i] = (elf_greg_t) regs->regs[i];
+	grp[MIPS32_EF_R26] = 0;
+	grp[MIPS32_EF_R27] = 0;
+	grp[MIPS32_EF_LO] = (elf_greg_t) regs->lo;
+	grp[MIPS32_EF_HI] = (elf_greg_t) regs->hi;
+	grp[MIPS32_EF_CP0_EPC] = (elf_greg_t) regs->cp0_epc;
+	grp[MIPS32_EF_CP0_BADVADDR] = (elf_greg_t) regs->cp0_badvaddr;
+	grp[MIPS32_EF_CP0_STATUS] = (elf_greg_t) regs->cp0_status;
+	grp[MIPS32_EF_CP0_CAUSE] = (elf_greg_t) regs->cp0_cause;
+#ifdef MIPS32_EF_UNUSED0
+	grp[MIPS32_EF_UNUSED0] = 0;
 #endif
 }
 

[PATCH 3.10 25/71] MIPS: asm: thread_info: Add _TIF_SECCOMP flag

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Markos Chandras <markos.chandras@imgtec.com>

commit 137f7df8cead00688524c82360930845396b8a21 upstream.

Add _TIF_SECCOMP flag to _TIF_WORK_SYSCALL_ENTRY to indicate
that the system call needs to be checked against a seccomp filter.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6405/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
[bwh: Backported to 3.2: various other flags are not included in
 _TIF_WORK_SYSCALL_ENTRY]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/include/asm/thread_info.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -131,7 +131,7 @@ static inline struct thread_info *curren
 #define _TIF_FPUBOUND		(1<<TIF_FPUBOUND)
 #define _TIF_LOAD_WATCH		(1<<TIF_LOAD_WATCH)
 
-#define _TIF_WORK_SYSCALL_ENTRY	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT)
+#define _TIF_WORK_SYSCALL_ENTRY	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SECCOMP)
 
 /* work to do in syscall_trace_leave() */
 #define _TIF_WORK_SYSCALL_EXIT	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT)

[PATCH 3.10 27/71] MIPS: Fix accessing to per-cpu data when flushing the cache

[Greg Kroah-Hartman]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ralf Baechle <ralf@linux-mips.org>

commit ff522058bd717506b2fa066fa564657f2b86477e upstream.

This fixes the following issue

BUG: using smp_processor_id() in preemptible [00000000] code: kjournald/1761
caller is blast_dcache32+0x30/0x254
Call Trace:
[<8047f02c>] dump_stack+0x8/0x34
[<802e7e40>] debug_smp_processor_id+0xe0/0xf0
[<80114d94>] blast_dcache32+0x30/0x254
[<80118484>] r4k_dma_cache_wback_inv+0x200/0x288
[<80110ff0>] mips_dma_map_sg+0x108/0x180
[<80355098>] ide_dma_prepare+0xf0/0x1b8
[<8034eaa4>] do_rw_taskfile+0x1e8/0x33c
[<8035951c>] ide_do_rw_disk+0x298/0x3e4
[<8034a3c4>] do_ide_request+0x2e0/0x704
[<802bb0dc>] __blk_run_queue+0x44/0x64
[<802be000>] queue_unplugged.isra.36+0x1c/0x54
[<802beb94>] blk_flush_plug_list+0x18c/0x24c
[<802bec6c>] blk_finish_plug+0x18/0x48
[<8026554c>] journal_commit_transaction+0x3b8/0x151c
[<80269648>] kjournald+0xec/0x238
[<8014ac00>] kthread+0xb8/0xc0
[<8010268c>] ret_from_kernel_thread+0x14/0x1c

Caches in most systems are identical - but not always, so we can't avoid
the use of smp_call_function() by just looking at the boot CPU's data,
have to fiddle with preemption instead.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5835
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/mm/c-r4k.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -12,6 +12,7 @@
 #include <linux/highmem.h>
 #include <linux/kernel.h>
 #include <linux/linkage.h>
+#include <linux/preempt.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/mm.h>
@@ -601,6 +602,7 @@ static void r4k_dma_cache_wback_inv(unsi
 	/* Catch bad driver code */
 	BUG_ON(size == 0);
 
+	preempt_disable();
 	if (cpu_has_inclusive_pcaches) {
 		if (size >= scache_size)
 			r4k_blast_scache();
@@ -621,6 +623,7 @@ static void r4k_dma_cache_wback_inv(unsi
 		R4600_HIT_CACHEOP_WAR_IMPL;
 		blast_dcache_range(addr, addr + size);
 	}
+	preempt_enable();
 
 	bc_wback_inv(addr, size);
 	__sync();
@@ -631,6 +634,7 @@ static void r4k_dma_cache_inv(unsigned l
 	/* Catch bad driver code */
 	BUG_ON(size == 0);
 
+	preempt_disable();
 	if (cpu_has_inclusive_pcaches) {
 		if (size >= scache_size)
 			r4k_blast_scache();
@@ -655,6 +659,7 @@ static void r4k_dma_cache_inv(unsigned l
 		R4600_HIT_CACHEOP_WAR_IMPL;
 		blast_inv_dcache_range(addr, addr + size);
 	}
+	preempt_enable();
 
 	bc_inv(addr, size);
 	__sync();