From: James Hogan <james.hogan@mips.com>
To: Paul Cercueil <paul@crapouillou.net>
Cc: Ralf Baechle <ralf@linux-mips.org>,
Maarten ter Huurne <maarten@treewalker.org>,
Paul Burton <paul.burton@mips.com>,
<linux-kernel@vger.kernel.org>, <linux-mips@linux-mips.org>
Subject: Re: [PATCH v6 10/15] MIPS: ingenic: Detect machtype from SoC compatible string
Date: Wed, 10 Jan 2018 22:27:13 +0000 [thread overview]
Message-ID: <20180110222712.GU27409@jhogan-linux.mipstec.com> (raw)
In-Reply-To: <20180105182513.16248-11-paul@crapouillou.net>
[-- Attachment #1: Type: text/plain, Size: 2548 bytes --]
On Fri, Jan 05, 2018 at 07:25:08PM +0100, Paul Cercueil wrote:
> Previously, the mips_machtype variable was always initialized
> to MACH_INGENIC_JZ4740 even if running on different SoCs.
>
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
> arch/mips/jz4740/prom.c | 1 -
> arch/mips/jz4740/setup.c | 26 ++++++++++++++++++++++----
> 2 files changed, 22 insertions(+), 5 deletions(-)
>
> v2: No change
> v3: No change
> v4: No change
> v5: Use SPDX license identifier
> v6: Init mips_machtype from DT compatible string instead of using
> MIPS_MACHINE
>
> diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c
> index a62dd8e6ecf9..eb9f2f97bedb 100644
> --- a/arch/mips/jz4740/prom.c
> +++ b/arch/mips/jz4740/prom.c
> @@ -25,7 +25,6 @@
>
> void __init prom_init(void)
> {
> - mips_machtype = MACH_INGENIC_JZ4740;
> fw_init_cmdline();
> }
>
> diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
> index 6d0152321819..cd89536fbba1 100644
> --- a/arch/mips/jz4740/setup.c
> +++ b/arch/mips/jz4740/setup.c
> @@ -53,16 +53,30 @@ static void __init jz4740_detect_mem(void)
> add_memory_region(0, size, BOOT_MEM_RAM);
> }
>
> +static unsigned long __init get_board_mach_type(const void *fdt)
> +{
> + if (!fdt_node_check_compatible(fdt, 0, "ingenic,jz4780"))
> + return MACH_INGENIC_JZ4780;
> + if (!fdt_node_check_compatible(fdt, 0, "ingenic,jz4770"))
> + return MACH_INGENIC_JZ4770;
> +
> + return MACH_INGENIC_JZ4740;
> +}
> +
> void __init plat_mem_setup(void)
> {
> int offset;
>
> + if (!early_init_dt_scan(__dtb_start))
> + return;
> +
> jz4740_reset_init();
> - __dt_setup_arch(__dtb_start);
Is it intentional that by removing this we no longer set the machine
name, so it'll default to "unknown"? The commit message doesn't mention
that change.
Cheers
James
>
> offset = fdt_path_offset(__dtb_start, "/memory");
> if (offset < 0)
> jz4740_detect_mem();
> +
> + mips_machtype = get_board_mach_type(__dtb_start);
> }
>
> void __init device_tree_init(void)
> @@ -75,10 +89,14 @@ void __init device_tree_init(void)
>
> const char *get_system_type(void)
> {
> - if (IS_ENABLED(CONFIG_MACH_JZ4780))
> + switch (mips_machtype) {
> + case MACH_INGENIC_JZ4780:
> return "JZ4780";
> -
> - return "JZ4740";
> + case MACH_INGENIC_JZ4770:
> + return "JZ4770";
> + default:
> + return "JZ4740";
> + }
> }
>
> void __init arch_init_irq(void)
> --
> 2.11.0
>
>
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: James Hogan <james.hogan@mips.com>
To: Paul Cercueil <paul@crapouillou.net>
Cc: Ralf Baechle <ralf@linux-mips.org>,
Maarten ter Huurne <maarten@treewalker.org>,
Paul Burton <paul.burton@mips.com>,
linux-kernel@vger.kernel.org, linux-mips@linux-mips.org
Subject: Re: [PATCH v6 10/15] MIPS: ingenic: Detect machtype from SoC compatible string
Date: Wed, 10 Jan 2018 22:27:13 +0000 [thread overview]
Message-ID: <20180110222712.GU27409@jhogan-linux.mipstec.com> (raw)
Message-ID: <20180110222713.TXca9jFPPHXbra9x21HTzo_qERZT_MzFLBSw6vEyNkc@z> (raw)
In-Reply-To: <20180105182513.16248-11-paul@crapouillou.net>
[-- Attachment #1: Type: text/plain, Size: 2548 bytes --]
On Fri, Jan 05, 2018 at 07:25:08PM +0100, Paul Cercueil wrote:
> Previously, the mips_machtype variable was always initialized
> to MACH_INGENIC_JZ4740 even if running on different SoCs.
>
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
> arch/mips/jz4740/prom.c | 1 -
> arch/mips/jz4740/setup.c | 26 ++++++++++++++++++++++----
> 2 files changed, 22 insertions(+), 5 deletions(-)
>
> v2: No change
> v3: No change
> v4: No change
> v5: Use SPDX license identifier
> v6: Init mips_machtype from DT compatible string instead of using
> MIPS_MACHINE
>
> diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c
> index a62dd8e6ecf9..eb9f2f97bedb 100644
> --- a/arch/mips/jz4740/prom.c
> +++ b/arch/mips/jz4740/prom.c
> @@ -25,7 +25,6 @@
>
> void __init prom_init(void)
> {
> - mips_machtype = MACH_INGENIC_JZ4740;
> fw_init_cmdline();
> }
>
> diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
> index 6d0152321819..cd89536fbba1 100644
> --- a/arch/mips/jz4740/setup.c
> +++ b/arch/mips/jz4740/setup.c
> @@ -53,16 +53,30 @@ static void __init jz4740_detect_mem(void)
> add_memory_region(0, size, BOOT_MEM_RAM);
> }
>
> +static unsigned long __init get_board_mach_type(const void *fdt)
> +{
> + if (!fdt_node_check_compatible(fdt, 0, "ingenic,jz4780"))
> + return MACH_INGENIC_JZ4780;
> + if (!fdt_node_check_compatible(fdt, 0, "ingenic,jz4770"))
> + return MACH_INGENIC_JZ4770;
> +
> + return MACH_INGENIC_JZ4740;
> +}
> +
> void __init plat_mem_setup(void)
> {
> int offset;
>
> + if (!early_init_dt_scan(__dtb_start))
> + return;
> +
> jz4740_reset_init();
> - __dt_setup_arch(__dtb_start);
Is it intentional that by removing this we no longer set the machine
name, so it'll default to "unknown"? The commit message doesn't mention
that change.
Cheers
James
>
> offset = fdt_path_offset(__dtb_start, "/memory");
> if (offset < 0)
> jz4740_detect_mem();
> +
> + mips_machtype = get_board_mach_type(__dtb_start);
> }
>
> void __init device_tree_init(void)
> @@ -75,10 +89,14 @@ void __init device_tree_init(void)
>
> const char *get_system_type(void)
> {
> - if (IS_ENABLED(CONFIG_MACH_JZ4780))
> + switch (mips_machtype) {
> + case MACH_INGENIC_JZ4780:
> return "JZ4780";
> -
> - return "JZ4740";
> + case MACH_INGENIC_JZ4770:
> + return "JZ4770";
> + default:
> + return "JZ4740";
> + }
> }
>
> void __init arch_init_irq(void)
> --
> 2.11.0
>
>
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2018-01-10 22:28 UTC|newest]
Thread overview: 82+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-02 15:08 [PATCH v5 01/15] clk: ingenic: Use const pointer to clk_ops in struct Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 02/15] clk: ingenic: Fix recalc_rate for clocks with fixed divider Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 03/15] clk: ingenic: support PLLs with no bypass bit Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 04/15] clk: ingenic: Add code to enable/disable PLLs Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 05/15] dt-bindings: clock: Add jz4770-cgu.h header Paul Cercueil
2018-01-05 16:34 ` Rob Herring
2018-01-02 15:08 ` [PATCH v5 06/15] clk: Add Ingenic jz4770 CGU driver Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 07/15] MIPS: Setup boot_command_line before plat_mem_setup Paul Cercueil
2018-01-02 17:05 ` Mathieu Malaterre
2018-01-02 15:08 ` [PATCH v5 08/15] MIPS: ingenic: Use common cmdline handling code Paul Cercueil
2018-01-02 15:58 ` PrasannaKumar Muralidharan
2018-01-02 15:08 ` [PATCH v5 09/15] MIPS: platform: add machtype IDs for more Ingenic SoCs Paul Cercueil
2018-01-02 15:59 ` PrasannaKumar Muralidharan
2018-01-02 15:08 ` [PATCH v5 10/15] MIPS: ingenic: Add machine info for supported boards Paul Cercueil
2018-01-02 16:02 ` PrasannaKumar Muralidharan
2018-01-02 16:32 ` Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 11/15] MIPS: ingenic: Initial JZ4770 support Paul Cercueil
2018-01-02 16:09 ` PrasannaKumar Muralidharan
2018-01-02 15:08 ` [PATCH v5 12/15] MIPS: JZ4770: Work around config2 misreporting associativity Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 13/15] MIPS: JZ4770: Workaround for corrupted DMA transfers Paul Cercueil
2018-01-02 16:45 ` PrasannaKumar Muralidharan
2018-01-05 18:03 ` Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 14/15] devicetree/bindings: Add GCW vendor prefix Paul Cercueil
2018-01-02 15:08 ` [PATCH v5 15/15] MIPS: ingenic: Initial GCW Zero support Paul Cercueil
2018-01-02 17:04 ` Mathieu Malaterre
2018-01-05 18:24 ` [PATCH v6 00/15] JZ4770 SoC support Paul Cercueil
2018-01-05 18:24 ` [PATCH v6 01/15] clk: ingenic: Use const pointer to clk_ops in struct Paul Cercueil
2018-01-16 15:47 ` [PATCH v7 00/14] JZ4770 and GCW0 patchset Paul Cercueil
2018-01-16 15:47 ` [PATCH v7 01/14] clk: ingenic: Use const pointer to clk_ops in struct Paul Cercueil
2018-01-16 15:47 ` [PATCH v7 02/14] clk: ingenic: Fix recalc_rate for clocks with fixed divider Paul Cercueil
2018-01-16 15:47 ` [PATCH v7 03/14] clk: ingenic: support PLLs with no bypass bit Paul Cercueil
2018-01-16 15:47 ` [PATCH v7 04/14] clk: ingenic: Add code to enable/disable PLLs Paul Cercueil
2018-01-16 15:47 ` [PATCH v7 05/14] dt-bindings: clock: Add jz4770-cgu.h header Paul Cercueil
2018-01-16 15:47 ` [PATCH v7 06/14] clk: Add Ingenic jz4770 CGU driver Paul Cercueil
2018-01-16 15:47 ` [PATCH v7 07/14] MIPS: Setup boot_command_line before plat_mem_setup Paul Cercueil
2018-01-16 15:47 ` [PATCH v7 08/14] MIPS: ingenic: Use common cmdline handling code Paul Cercueil
2018-01-16 15:47 ` [PATCH v7 09/14] MIPS: platform: add machtype IDs for more Ingenic SoCs Paul Cercueil
2018-01-16 15:48 ` [PATCH v7 10/14] MIPS: ingenic: Detect machtype from SoC compatible string Paul Cercueil
2018-01-16 22:06 ` James Hogan
2018-01-16 15:48 ` [PATCH v7 11/14] MIPS: ingenic: Initial JZ4770 support Paul Cercueil
2018-01-17 21:28 ` James Hogan
2018-01-17 21:28 ` James Hogan
2018-01-18 17:14 ` Paul Cercueil
2018-01-18 20:30 ` James Hogan
2018-01-18 20:30 ` James Hogan
2018-01-16 15:48 ` [PATCH v7 12/14] MIPS: JZ4770: Work around config2 misreporting associativity Paul Cercueil
2018-01-16 15:48 ` [PATCH v7 13/14] devicetree/bindings: Add GCW vendor prefix Paul Cercueil
2018-01-16 15:48 ` [PATCH v7 14/14] MIPS: ingenic: Initial GCW Zero support Paul Cercueil
2018-02-01 15:31 ` [PATCH v7 00/14] JZ4770 and GCW0 patchset James Hogan
2018-01-05 18:25 ` [PATCH v6 02/15] clk: ingenic: Fix recalc_rate for clocks with fixed divider Paul Cercueil
2018-01-05 18:25 ` [PATCH v6 03/15] clk: ingenic: support PLLs with no bypass bit Paul Cercueil
2018-01-05 18:25 ` [PATCH v6 04/15] clk: ingenic: Add code to enable/disable PLLs Paul Cercueil
2018-01-05 18:25 ` [PATCH v6 05/15] dt-bindings: clock: Add jz4770-cgu.h header Paul Cercueil
2018-01-05 18:25 ` [PATCH v6 06/15] clk: Add Ingenic jz4770 CGU driver Paul Cercueil
2018-01-10 21:37 ` James Hogan
2018-01-10 21:37 ` James Hogan
2018-01-05 18:25 ` [PATCH v6 07/15] MIPS: Setup boot_command_line before plat_mem_setup Paul Cercueil
2018-01-05 18:25 ` [PATCH v6 08/15] MIPS: ingenic: Use common cmdline handling code Paul Cercueil
2018-01-10 22:16 ` James Hogan
2018-01-10 22:16 ` James Hogan
2018-01-05 18:25 ` [PATCH v6 09/15] MIPS: platform: add machtype IDs for more Ingenic SoCs Paul Cercueil
2018-01-10 22:19 ` James Hogan
2018-01-10 22:19 ` James Hogan
2018-01-05 18:25 ` [PATCH v6 10/15] MIPS: ingenic: Detect machtype from SoC compatible string Paul Cercueil
2018-01-10 22:27 ` James Hogan [this message]
2018-01-10 22:27 ` James Hogan
2018-01-16 14:06 ` Paul Cercueil
2018-01-05 18:25 ` [PATCH v6 11/15] MIPS: ingenic: Initial JZ4770 support Paul Cercueil
2018-01-10 22:42 ` James Hogan
2018-01-10 22:42 ` James Hogan
2018-01-05 18:25 ` [PATCH v6 12/15] MIPS: JZ4770: Work around config2 misreporting associativity Paul Cercueil
2018-01-10 22:52 ` James Hogan
2018-01-10 22:52 ` James Hogan
2018-01-05 18:25 ` [PATCH v6 13/15] MIPS: JZ4770: Workaround for corrupted DMA transfers Paul Cercueil
2018-01-10 23:20 ` James Hogan
2018-01-10 23:20 ` James Hogan
2018-01-16 14:10 ` Paul Cercueil
2018-01-05 18:25 ` [PATCH v6 14/15] devicetree/bindings: Add GCW vendor prefix Paul Cercueil
2018-01-05 18:25 ` [PATCH v6 15/15] MIPS: ingenic: Initial GCW Zero support Paul Cercueil
2018-01-07 16:18 ` Philippe Ombredanne
2018-01-10 22:59 ` Paul Cercueil
2018-01-23 10:31 ` Philippe Ombredanne
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180110222712.GU27409@jhogan-linux.mipstec.com \
--to=james.hogan@mips.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=maarten@treewalker.org \
--cc=paul.burton@mips.com \
--cc=paul@crapouillou.net \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox