[PATCH 4.14 001/496] MIPS: c-r4k: Fix data corruption related to cache coherence

[PATCH 4.14 001/496] MIPS: c-r4k: Fix data corruption related to cache coherence

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: NeilBrown <neil@brown.name>

commit 55a2aa08b3af519a9693f99cdf7fa6d8b62d9f65 upstream.

When DMA will be performed to a MIPS32 1004K CPS, the L1-cache for the
range needs to be flushed and invalidated first.
The code currently takes one of two approaches.
1/ If the range is less than the size of the dcache, then HIT type
   requests flush/invalidate cache lines for the particular addresses.
   HIT-type requests a globalised by the CPS so this is safe on SMP.

2/ If the range is larger than the size of dcache, then INDEX type
   requests flush/invalidate the whole cache. INDEX type requests affect
   the local cache only. CPS does not propagate them in any way. So this
   invalidation is not safe on SMP CPS systems.

Data corruption due to '2' can quite easily be demonstrated by
repeatedly "echo 3 > /proc/sys/vm/drop_caches" and then sha1sum a file
that is several times the size of available memory. Dropping caches
means that large contiguous extents (large than dcache) are more likely.

This was not a problem before Linux-4.8 because option 2 was never used
if CONFIG_MIPS_CPS was defined. The commit which removed that apparently
didn't appreciate the full consequence of the change.

We could, in theory, globalize the INDEX based flush by sending an IPI
to other cores. These cache invalidation routines can be called with
interrupts disabled and synchronous IPI require interrupts to be
enabled. Asynchronous IPI may not trigger writeback soon enough. So we
cannot use IPI in practice.

We can already test if IPI would be needed for an INDEX operation with
r4k_op_needs_ipi(R4K_INDEX). If this is true then we mustn't try the
INDEX approach as we cannot use IPI. If this is false (e.g. when there
is only one core and hence one L1 cache) then it is safe to use the
INDEX approach without IPI.

This patch avoids options 2 if r4k_op_needs_ipi(R4K_INDEX), and so
eliminates the corruption.

Fixes: c00ab4896ed5 ("MIPS: Remove cpu_has_safe_index_cacheops")
Signed-off-by: NeilBrown <neil@brown.name>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.8+
Patchwork: https://patchwork.linux-mips.org/patch/19259/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/mm/c-r4k.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -851,9 +851,12 @@ static void r4k_dma_cache_wback_inv(unsi
 	/*
 	 * Either no secondary cache or the available caches don't have the
 	 * subset property so we have to flush the primary caches
-	 * explicitly
+	 * explicitly.
+	 * If we would need IPI to perform an INDEX-type operation, then
+	 * we have to use the HIT-type alternative as IPI cannot be used
+	 * here due to interrupts possibly being disabled.
 	 */
-	if (size >= dcache_size) {
+	if (!r4k_op_needs_ipi(R4K_INDEX) && size >= dcache_size) {
 		r4k_blast_dcache();
 	} else {
 		R4600_HIT_CACHEOP_WAR_IMPL;
@@ -890,7 +893,7 @@ static void r4k_dma_cache_inv(unsigned l
 		return;
 	}
 
-	if (size >= dcache_size) {
+	if (!r4k_op_needs_ipi(R4K_INDEX) && size >= dcache_size) {
 		r4k_blast_dcache();
 	} else {
 		R4600_HIT_CACHEOP_WAR_IMPL;

[PATCH 4.14 002/496] MIPS: ptrace: Expose FIR register through FP regset

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maciej W. Rozycki <macro@mips.com>

commit 71e909c0cdad28a1df1fa14442929e68615dee45 upstream.

Correct commit 7aeb753b5353 ("MIPS: Implement task_user_regset_view.")
and expose the FIR register using the unused 4 bytes at the end of the
NT_PRFPREG regset.  Without that register included clients cannot use
the PTRACE_GETREGSET request to retrieve the complete FPU register set
and have to resort to one of the older interfaces, either PTRACE_PEEKUSR
or PTRACE_GETFPREGS, to retrieve the missing piece of data.  Also the
register is irreversibly missing from core dumps.

This register is architecturally hardwired and read-only so the write
path does not matter.  Ignore data supplied on writes then.

Fixes: 7aeb753b5353 ("MIPS: Implement task_user_regset_view.")
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.13+
Patchwork: https://patchwork.linux-mips.org/patch/19273/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/ptrace.c |   18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -454,7 +454,7 @@ static int fpr_get_msa(struct task_struc
 /*
  * Copy the floating-point context to the supplied NT_PRFPREG buffer.
  * Choose the appropriate helper for general registers, and then copy
- * the FCSR register separately.
+ * the FCSR and FIR registers separately.
  */
 static int fpr_get(struct task_struct *target,
 		   const struct user_regset *regset,
@@ -462,6 +462,7 @@ static int fpr_get(struct task_struct *t
 		   void *kbuf, void __user *ubuf)
 {
 	const int fcr31_pos = NUM_FPU_REGS * sizeof(elf_fpreg_t);
+	const int fir_pos = fcr31_pos + sizeof(u32);
 	int err;
 
 	if (sizeof(target->thread.fpu.fpr[0]) == sizeof(elf_fpreg_t))
@@ -474,6 +475,12 @@ static int fpr_get(struct task_struct *t
 	err = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 				  &target->thread.fpu.fcr31,
 				  fcr31_pos, fcr31_pos + sizeof(u32));
+	if (err)
+		return err;
+
+	err = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  &boot_cpu_data.fpu_id,
+				  fir_pos, fir_pos + sizeof(u32));
 
 	return err;
 }
@@ -522,7 +529,8 @@ static int fpr_set_msa(struct task_struc
 /*
  * Copy the supplied NT_PRFPREG buffer to the floating-point context.
  * Choose the appropriate helper for general registers, and then copy
- * the FCSR register separately.
+ * the FCSR register separately.  Ignore the incoming FIR register
+ * contents though, as the register is read-only.
  *
  * We optimize for the case where `count % sizeof(elf_fpreg_t) == 0',
  * which is supposed to have been guaranteed by the kernel before
@@ -536,6 +544,7 @@ static int fpr_set(struct task_struct *t
 		   const void *kbuf, const void __user *ubuf)
 {
 	const int fcr31_pos = NUM_FPU_REGS * sizeof(elf_fpreg_t);
+	const int fir_pos = fcr31_pos + sizeof(u32);
 	u32 fcr31;
 	int err;
 
@@ -563,6 +572,11 @@ static int fpr_set(struct task_struct *t
 		ptrace_setfcr31(target, fcr31);
 	}
 
+	if (count > 0)
+		err = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+						fir_pos,
+						fir_pos + sizeof(u32));
+
 	return err;
 }
 

[PATCH 4.14 003/496] MIPS: Fix ptrace(2) PTRACE_PEEKUSR and PTRACE_POKEUSR accesses to o32 FGRs

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maciej W. Rozycki <macro@mips.com>

commit 9a3a92ccfe3620743d4ae57c987dc8e9c5f88996 upstream.

Check the TIF_32BIT_FPREGS task setting of the tracee rather than the
tracer in determining the layout of floating-point general registers in
the floating-point context, correcting access to odd-numbered registers
for o32 tracees where the setting disagrees between the two processes.

Fixes: 597ce1723e0f ("MIPS: Support for 64-bit FP with O32 binaries")
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.14+
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/ptrace.c   |    4 ++--
 arch/mips/kernel/ptrace32.c |    4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -798,7 +798,7 @@ long arch_ptrace(struct task_struct *chi
 			fregs = get_fpu_regs(child);
 
 #ifdef CONFIG_32BIT
-			if (test_thread_flag(TIF_32BIT_FPREGS)) {
+			if (test_tsk_thread_flag(child, TIF_32BIT_FPREGS)) {
 				/*
 				 * The odd registers are actually the high
 				 * order bits of the values stored in the even
@@ -887,7 +887,7 @@ long arch_ptrace(struct task_struct *chi
 
 			init_fp_ctx(child);
 #ifdef CONFIG_32BIT
-			if (test_thread_flag(TIF_32BIT_FPREGS)) {
+			if (test_tsk_thread_flag(child, TIF_32BIT_FPREGS)) {
 				/*
 				 * The odd registers are actually the high
 				 * order bits of the values stored in the even
--- a/arch/mips/kernel/ptrace32.c
+++ b/arch/mips/kernel/ptrace32.c
@@ -98,7 +98,7 @@ long compat_arch_ptrace(struct task_stru
 				break;
 			}
 			fregs = get_fpu_regs(child);
-			if (test_thread_flag(TIF_32BIT_FPREGS)) {
+			if (test_tsk_thread_flag(child, TIF_32BIT_FPREGS)) {
 				/*
 				 * The odd registers are actually the high
 				 * order bits of the values stored in the even
@@ -205,7 +205,7 @@ long compat_arch_ptrace(struct task_stru
 				       sizeof(child->thread.fpu));
 				child->thread.fpu.fcr31 = 0;
 			}
-			if (test_thread_flag(TIF_32BIT_FPREGS)) {
+			if (test_tsk_thread_flag(child, TIF_32BIT_FPREGS)) {
 				/*
 				 * The odd registers are actually the high
 				 * order bits of the values stored in the even

[PATCH 4.14 004/496] KVM: Fix spelling mistake: "cop_unsuable" -> "cop_unusable"

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Colin Ian King <colin.king@canonical.com>

commit ba3696e94d9d590d9a7e55f68e81c25dba515191 upstream.

Trivial fix to spelling mistake in debugfs_entries text.

Fixes: 669e846e6c4e ("KVM/MIPS32: MIPS arch specific APIs for KVM")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kernel-janitors@vger.kernel.org
Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kvm/mips.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mips/kvm/mips.c
+++ b/arch/mips/kvm/mips.c
@@ -45,7 +45,7 @@ struct kvm_stats_debugfs_item debugfs_en
 	{ "cache",	  VCPU_STAT(cache_exits),	 KVM_STAT_VCPU },
 	{ "signal",	  VCPU_STAT(signal_exits),	 KVM_STAT_VCPU },
 	{ "interrupt",	  VCPU_STAT(int_exits),		 KVM_STAT_VCPU },
-	{ "cop_unsuable", VCPU_STAT(cop_unusable_exits), KVM_STAT_VCPU },
+	{ "cop_unusable", VCPU_STAT(cop_unusable_exits), KVM_STAT_VCPU },
 	{ "tlbmod",	  VCPU_STAT(tlbmod_exits),	 KVM_STAT_VCPU },
 	{ "tlbmiss_ld",	  VCPU_STAT(tlbmiss_ld_exits),	 KVM_STAT_VCPU },
 	{ "tlbmiss_st",	  VCPU_STAT(tlbmiss_st_exits),	 KVM_STAT_VCPU },

[PATCH 4.14 057/496] MIPS: generic: Fix machine compatible matching

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <jhogan@kernel.org>

[ Upstream commit 9a9ab3078e2744a1a55163cfaec73a5798aae33e ]

We now have a platform (Ranchu) in the "generic" platform which matches
based on the FDT compatible string using mips_machine_is_compatible(),
however that function doesn't stop at a blank struct
of_device_id::compatible as that is an array in the struct, not a
pointer to a string.

Fix the loop completion to check the first byte of the compatible array
rather than the address of the compatible array in the struct.

Fixes: eed0eabd12ef ("MIPS: generic: Introduce generic DT-based board support")
Signed-off-by: James Hogan <jhogan@kernel.org>
Reviewed-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18580/
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/mips/include/asm/machine.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mips/include/asm/machine.h
+++ b/arch/mips/include/asm/machine.h
@@ -52,7 +52,7 @@ mips_machine_is_compatible(const struct
 	if (!mach->matches)
 		return NULL;
 
-	for (match = mach->matches; match->compatible; match++) {
+	for (match = mach->matches; match->compatible[0]; match++) {
 		if (fdt_node_check_compatible(fdt, 0, match->compatible) == 0)
 			return match;
 	}

[PATCH 4.14 410/496] MIPS: ath79: Fix AR724X_PLL_REG_PCIE_CONFIG offset

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Kresin <dev@kresin.me>

[ Upstream commit 05454c1bde91fb013c0431801001da82947e6b5a ]

According to the QCA u-boot source the "PCIE Phase Lock Loop
Configuration (PCIE_PLL_CONFIG)" register is for all SoCs except the
QCA955X and QCA956X at offset 0x10.

Since the PCIE PLL config register is only defined for the AR724x fix
only this value. The value is wrong since the day it was added and isn't
used by any driver yet.

Signed-off-by: Mathias Kresin <dev@kresin.me>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16048/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/mips/include/asm/mach-ath79/ar71xx_regs.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -167,7 +167,7 @@
 #define AR71XX_AHB_DIV_MASK		0x7
 
 #define AR724X_PLL_REG_CPU_CONFIG	0x00
-#define AR724X_PLL_REG_PCIE_CONFIG	0x18
+#define AR724X_PLL_REG_PCIE_CONFIG	0x10
 
 #define AR724X_PLL_FB_SHIFT		0
 #define AR724X_PLL_FB_MASK		0x3ff

[PATCH 4.14 475/496] MIPS: Octeon: Fix logging messages with spurious periods after newlines

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joe Perches <joe@perches.com>

[ Upstream commit db6775ca6e0353d2618ca7d5e210fc36ad43bbd4 ]

Using a period after a newline causes bad output.

Fixes: 64b139f97c01 ("MIPS: OCTEON: irq: add CIB and other fixes")
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17886/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/mips/cavium-octeon/octeon-irq.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/arch/mips/cavium-octeon/octeon-irq.c
+++ b/arch/mips/cavium-octeon/octeon-irq.c
@@ -2271,7 +2271,7 @@ static int __init octeon_irq_init_cib(st
 
 	parent_irq = irq_of_parse_and_map(ciu_node, 0);
 	if (!parent_irq) {
-		pr_err("ERROR: Couldn't acquire parent_irq for %s\n.",
+		pr_err("ERROR: Couldn't acquire parent_irq for %s\n",
 			ciu_node->name);
 		return -EINVAL;
 	}
@@ -2283,7 +2283,7 @@ static int __init octeon_irq_init_cib(st
 
 	addr = of_get_address(ciu_node, 0, NULL, NULL);
 	if (!addr) {
-		pr_err("ERROR: Couldn't acquire reg(0) %s\n.", ciu_node->name);
+		pr_err("ERROR: Couldn't acquire reg(0) %s\n", ciu_node->name);
 		return -EINVAL;
 	}
 	host_data->raw_reg = (u64)phys_to_virt(
@@ -2291,7 +2291,7 @@ static int __init octeon_irq_init_cib(st
 
 	addr = of_get_address(ciu_node, 1, NULL, NULL);
 	if (!addr) {
-		pr_err("ERROR: Couldn't acquire reg(1) %s\n.", ciu_node->name);
+		pr_err("ERROR: Couldn't acquire reg(1) %s\n", ciu_node->name);
 		return -EINVAL;
 	}
 	host_data->en_reg = (u64)phys_to_virt(
@@ -2299,7 +2299,7 @@ static int __init octeon_irq_init_cib(st
 
 	r = of_property_read_u32(ciu_node, "cavium,max-bits", &val);
 	if (r) {
-		pr_err("ERROR: Couldn't read cavium,max-bits from %s\n.",
+		pr_err("ERROR: Couldn't read cavium,max-bits from %s\n",
 			ciu_node->name);
 		return r;
 	}
@@ -2309,7 +2309,7 @@ static int __init octeon_irq_init_cib(st
 					   &octeon_irq_domain_cib_ops,
 					   host_data);
 	if (!cib_domain) {
-		pr_err("ERROR: Couldn't irq_domain_add_linear()\n.");
+		pr_err("ERROR: Couldn't irq_domain_add_linear()\n");
 		return -ENOMEM;
 	}