From: Nathan Chancellor <nathan@kernel.org>
To: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-mips@vger.kernel.org, llvm@lists.linux.dev,
tsbogend@alpha.franken.de, ndesaulniers@google.com
Subject: Re: [PATCH 1/5] MIPS: Move various toolchain ASE check to Kconfig
Date: Fri, 7 Apr 2023 11:57:23 -0700 [thread overview]
Message-ID: <20230407185723.GA1511753@dev-arch.thelio-3990X> (raw)
In-Reply-To: <20230407102721.14814-2-jiaxun.yang@flygoat.com>
Hi Jiaxun,
On Fri, Apr 07, 2023 at 11:27:17AM +0100, Jiaxun Yang wrote:
> Use Kconfig to perform Kconfig toolchain feature check, so we will
> be able to have toolchain feature availablility information in Kconfig
> to guard relevant options.
>
First of all, thank you a lot for this series! I applied them on top of
mips-next and my allnoconfig issue appears to be gone. However, with
this change, 32r1{,el}_defconfig is broken for arch/mips/kernel/traps.c.
$ make -skj"$(nproc)" ARCH=mips CROSS_COMPILE=mips-linux-gnu- LLVM=1 LLVM_IAS=0 O=build mrproper 32r1_defconfig arch/mips/kernel/traps.o
...
/tmp/traps-f8ea56.s: Assembler messages:
/tmp/traps-f8ea56.s:8227: Error: `fp=64' used with a 32-bit fpu
/tmp/traps-f8ea56.s:8228: Error: `fp=64' used with a 32-bit fpu
/tmp/traps-f8ea56.s:8228: Warning: the `msa' extension requires MIPS32 revision 2 or greater
clang: error: assembler command failed with exit code 1 (use -v to see invocation)
...
In case it matters:
$ clang --version | head -1
ClangBuiltLinux clang version 16.0.1
$ mips-linux-gnu-as --version | head -1
GNU assembler (GNU Binutils) 2.40
A few comments below, I have not tested anything beyond this.
> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
> ---
> arch/mips/Kconfig | 27 +++++++++++++++++++++++++++
> arch/mips/Makefile | 29 +++--------------------------
> arch/mips/crypto/crc32-mips.c | 4 ++--
> arch/mips/include/asm/asmmacro.h | 8 ++++----
> arch/mips/include/asm/ginvt.h | 2 +-
> arch/mips/include/asm/mipsregs.h | 10 +++++-----
> arch/mips/include/asm/msa.h | 4 ++--
> 7 files changed, 44 insertions(+), 40 deletions(-)
>
> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> index 770d098b11bf..c52401c155a4 100644
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -3157,6 +3157,12 @@ config MIPS32_N32
>
> If unsure, say N.
>
> +config CC_HAS_SMARTMIPS
> + def_bool $(cc-option,-mmicromips)
-msmartmips?
> +
> +config CC_HAS_MICROMIPS
> + def_bool $(cc-option,-mmicromips)
Neither of these configurations are used in this change. Should they be
moved to the next change in the series?
> config CC_HAS_MNO_BRANCH_LIKELY
> def_bool y
> depends on $(cc-option,-mno-branch-likely)
> @@ -3165,6 +3171,27 @@ config CC_HAS_MNO_BRANCH_LIKELY
> config CC_HAS_BROKEN_INLINE_COMPAT_BRANCH
> def_bool y if CC_IS_CLANG
>
> +config AS_HAS_MSA
> + def_bool $(cc-option,-Wa$(comma)-mmsa)
> +
> +config AS_HAS_VIRT
> + def_bool $(cc-option,-Wa$(comma)-mvirt)
> +
> +# For -mmicromips, use -Wa,-fatal-warnings to catch unsupported -mxpa which
> +# only warns
> +config AS_HAS_XPA
> + def_bool $(cc-option,-Wa$(comma)-mxpa) if !CPU_MICROMIPS
> + def_bool $(cc-option,-mmicromips -Wa$(comma)-fatal-warnings -Wa$(comma)-mxpa) if CPU_MICROMIPS
> +
> +config AS_HAS_CRC
> + def_bool $(cc-option,-Wa$(comma)-mcrc)
> +
> +config AS_HAS_DSP
> + def_bool $(cc-option,-Wa$(comma)-mdsp)
> +
> +config AS_HAS_GINV
> + def_bool $(cc-option,-Wa$(comma)-mginv)
> +
> menu "Power management options"
>
> config ARCH_HIBERNATION_POSSIBLE
> diff --git a/arch/mips/Makefile b/arch/mips/Makefile
> index a7a4ee66a9d3..3aa0f9d4ceb6 100644
> --- a/arch/mips/Makefile
> +++ b/arch/mips/Makefile
> @@ -233,32 +233,9 @@ cflags-$(CONFIG_CPU_LOONGSON64) += $(call as-option,-Wa$(comma)-mno-fix-loongson
> # Pass -Wa,--no-warn to disable all assembler warnings until the kernel code has
> # been fixed properly.
> mips-cflags := $(cflags-y)
> -ifeq ($(CONFIG_CPU_HAS_SMARTMIPS),y)
> -smartmips-ase := $(call cc-option-yn,$(mips-cflags) -msmartmips)
> -cflags-$(smartmips-ase) += -msmartmips -Wa,--no-warn
> -endif
> -ifeq ($(CONFIG_CPU_MICROMIPS),y)
> -micromips-ase := $(call cc-option-yn,$(mips-cflags) -mmicromips)
> -cflags-$(micromips-ase) += -mmicromips
> -endif
> -ifeq ($(CONFIG_CPU_HAS_MSA),y)
> -toolchain-msa := $(call cc-option-yn,$(mips-cflags) -mhard-float -mfp64 -Wa$(comma)-mmsa)
> -cflags-$(toolchain-msa) += -DTOOLCHAIN_SUPPORTS_MSA
> -endif
> -toolchain-virt := $(call cc-option-yn,$(mips-cflags) -mvirt)
> -cflags-$(toolchain-virt) += -DTOOLCHAIN_SUPPORTS_VIRT
> -# For -mmicromips, use -Wa,-fatal-warnings to catch unsupported -mxpa which
> -# only warns
> -xpa-cflags-y := $(mips-cflags)
> -xpa-cflags-$(micromips-ase) += -mmicromips -Wa$(comma)-fatal-warnings
> -toolchain-xpa := $(call cc-option-yn,$(xpa-cflags-y) -mxpa)
> -cflags-$(toolchain-xpa) += -DTOOLCHAIN_SUPPORTS_XPA
> -toolchain-crc := $(call cc-option-yn,$(mips-cflags) -Wa$(comma)-mcrc)
> -cflags-$(toolchain-crc) += -DTOOLCHAIN_SUPPORTS_CRC
> -toolchain-dsp := $(call cc-option-yn,$(mips-cflags) -Wa$(comma)-mdsp)
> -cflags-$(toolchain-dsp) += -DTOOLCHAIN_SUPPORTS_DSP
> -toolchain-ginv := $(call cc-option-yn,$(mips-cflags) -Wa$(comma)-mginv)
> -cflags-$(toolchain-ginv) += -DTOOLCHAIN_SUPPORTS_GINV
> +
> +cflags-$(CONFIG_CPU_HAS_SMARTMIPS) += -msmartmips -Wa,--no-warn
> +cflags-$(CONFIG_CPU_MICROMIPS) += -mmicromips
>
> #
> # Firmware support
> diff --git a/arch/mips/crypto/crc32-mips.c b/arch/mips/crypto/crc32-mips.c
> index 3e4f5ba104f8..54bbcfae06d5 100644
> --- a/arch/mips/crypto/crc32-mips.c
> +++ b/arch/mips/crypto/crc32-mips.c
> @@ -27,7 +27,7 @@ enum crc_type {
> crc32c,
> };
>
> -#ifndef TOOLCHAIN_SUPPORTS_CRC
> +#ifndef CONFIG_AS_HAS_CRC
> #define _ASM_SET_CRC(OP, SZ, TYPE) \
> _ASM_MACRO_3R(OP, rt, rs, rt2, \
> ".ifnc \\rt, \\rt2\n\t" \
> @@ -38,7 +38,7 @@ _ASM_MACRO_3R(OP, rt, rs, rt2, \
> _ASM_INSN32_IF_MM(0x00000030 | (__rs << 16) | (__rt << 21) | \
> ((SZ) << 14) | ((TYPE) << 3)))
> #define _ASM_UNSET_CRC(op, SZ, TYPE) ".purgem " #op "\n\t"
> -#else /* !TOOLCHAIN_SUPPORTS_CRC */
> +#else /* !CONFIG_AS_HAS_CRC */
> #define _ASM_SET_CRC(op, SZ, TYPE) ".set\tcrc\n\t"
> #define _ASM_UNSET_CRC(op, SZ, TYPE)
> #endif
> diff --git a/arch/mips/include/asm/asmmacro.h b/arch/mips/include/asm/asmmacro.h
> index 067a635d3bc8..74c2dedc55b4 100644
> --- a/arch/mips/include/asm/asmmacro.h
> +++ b/arch/mips/include/asm/asmmacro.h
> @@ -239,7 +239,7 @@
> .word 0x41800000 | (\rt << 16) | (\rd << 11) | (\u << 5) | (\sel)
> .endm
>
> -#ifdef TOOLCHAIN_SUPPORTS_MSA
> +#ifdef CONFIG_AS_HAS_MSA
> .macro _cfcmsa rd, cs
> .set push
> .set mips32r2
> @@ -507,7 +507,7 @@
> .endm
> #endif
>
> -#ifdef TOOLCHAIN_SUPPORTS_MSA
> +#ifdef CONFIG_AS_HAS_MSA
> #define FPR_BASE_OFFS THREAD_FPR0
> #define FPR_BASE $1
> #else
> @@ -518,7 +518,7 @@
> .macro msa_save_all thread
> .set push
> .set noat
> -#ifdef TOOLCHAIN_SUPPORTS_MSA
> +#ifdef CONFIG_AS_HAS_MSA
> PTR_ADDU FPR_BASE, \thread, FPR_BASE_OFFS
> #endif
> st_d 0, THREAD_FPR0 - FPR_BASE_OFFS, FPR_BASE
> @@ -565,7 +565,7 @@
> .set hardfloat
> lw $1, THREAD_MSA_CSR(\thread)
> _ctcmsa MSA_CSR, $1
> -#ifdef TOOLCHAIN_SUPPORTS_MSA
> +#ifdef CONFIG_AS_HAS_MSA
> PTR_ADDU FPR_BASE, \thread, FPR_BASE_OFFS
> #endif
> ld_d 0, THREAD_FPR0 - FPR_BASE_OFFS, FPR_BASE
> diff --git a/arch/mips/include/asm/ginvt.h b/arch/mips/include/asm/ginvt.h
> index 87b2974ffc53..20244a622552 100644
> --- a/arch/mips/include/asm/ginvt.h
> +++ b/arch/mips/include/asm/ginvt.h
> @@ -10,7 +10,7 @@ enum ginvt_type {
> GINVT_MMID,
> };
>
> -#ifdef TOOLCHAIN_SUPPORTS_GINV
> +#ifdef CONFIG_AS_HAS_GINV
> # define _ASM_SET_GINV ".set ginv\n"
> # define _ASM_UNSET_GINV
> #else
> diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
> index 2d53704d9f24..8f0ebc399338 100644
> --- a/arch/mips/include/asm/mipsregs.h
> +++ b/arch/mips/include/asm/mipsregs.h
> @@ -1604,7 +1604,7 @@ do { \
> local_irq_restore(__flags); \
> } while (0)
>
> -#ifndef TOOLCHAIN_SUPPORTS_XPA
> +#ifndef CONFIG_AS_HAS_XPA
> #define _ASM_SET_MFHC0 \
> _ASM_MACRO_2R_1S(mfhc0, rt, rs, sel, \
> _ASM_INSN_IF_MIPS(0x40400000 | __rt << 16 | __rs << 11 | \\sel) \
> @@ -1615,7 +1615,7 @@ do { \
> _ASM_INSN_IF_MIPS(0x40c00000 | __rt << 16 | __rd << 11 | \\sel) \
> _ASM_INSN32_IF_MM(0x000002f4 | __rt << 21 | __rd << 16 | \\sel << 11))
> #define _ASM_UNSET_MTHC0 ".purgem mthc0\n\t"
> -#else /* !TOOLCHAIN_SUPPORTS_XPA */
> +#else /* !CONFIG_AS_HAS_XPA */
> #define _ASM_SET_MFHC0 ".set\txpa\n\t"
> #define _ASM_SET_MTHC0 ".set\txpa\n\t"
> #define _ASM_UNSET_MFHC0
> @@ -2040,7 +2040,7 @@ do { \
> * Macros to access the guest system control coprocessor
> */
>
> -#ifndef TOOLCHAIN_SUPPORTS_VIRT
> +#ifndef CONFIG_AS_HAS_VIRT
> #define _ASM_SET_MFGC0 \
> _ASM_MACRO_2R_1S(mfgc0, rt, rs, sel, \
> _ASM_INSN_IF_MIPS(0x40600000 | __rt << 16 | __rs << 11 | \\sel) \
> @@ -2077,7 +2077,7 @@ do { \
> #define __tlbginvf() \
> _ASM_INSN_IF_MIPS(0x4200000c) \
> _ASM_INSN32_IF_MM(0x0000517c)
> -#else /* !TOOLCHAIN_SUPPORTS_VIRT */
> +#else /* !CONFIG_AS_HAS_VIRT */
> #define _ASM_SET_VIRT ".set\tvirt\n\t"
> #define _ASM_SET_MFGC0 _ASM_SET_VIRT
> #define _ASM_SET_DMFGC0 _ASM_SET_VIRT
> @@ -2395,7 +2395,7 @@ do { \
> : : "r" (val)); \
> } while (0)
>
> -#ifdef TOOLCHAIN_SUPPORTS_DSP
> +#ifdef CONFIG_AS_HAS_DSP
> #define rddsp(mask) \
> ({ \
> unsigned int __dspctl; \
> diff --git a/arch/mips/include/asm/msa.h b/arch/mips/include/asm/msa.h
> index 236a49ee2e3e..a9ca57e3f780 100644
> --- a/arch/mips/include/asm/msa.h
> +++ b/arch/mips/include/asm/msa.h
> @@ -156,7 +156,7 @@ static inline void init_msa_upper(void)
> _init_msa_upper();
> }
>
> -#ifndef TOOLCHAIN_SUPPORTS_MSA
> +#ifndef CONFIG_AS_HAS_MSA
> /*
> * Define assembler macros using .word for the c[ft]cmsa instructions in order
> * to allow compilation with toolchains that do not support MSA. Once all
> @@ -173,7 +173,7 @@ static inline void init_msa_upper(void)
> _ASM_INSN_IF_MIPS(0x783e0019 | __rs << 11 | __cd << 6) \
> _ASM_INSN32_IF_MM(0x583e0016 | __rs << 11 | __cd << 6))
> #define _ASM_UNSET_CTCMSA ".purgem ctcmsa\n\t"
> -#else /* TOOLCHAIN_SUPPORTS_MSA */
> +#else /* CONFIG_AS_HAS_MSA */
> #define _ASM_SET_CFCMSA \
> ".set\tfp=64\n\t" \
> ".set\tmsa\n\t"
> --
> 2.39.2 (Apple Git-143)
>
next prev parent reply other threads:[~2023-04-07 19:00 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-07 10:27 [PATCH 0/5] MIPS: LLVM toolchain support for more CPUs Jiaxun Yang
2023-04-07 10:27 ` [PATCH 1/5] MIPS: Move various toolchain ASE check to Kconfig Jiaxun Yang
2023-04-07 18:57 ` Nathan Chancellor [this message]
2023-04-07 22:51 ` Jiaxun Yang
2023-04-07 10:27 ` [PATCH 2/5] MIPS: Add toolchain feature dependency for microMIPS smartMIPS Jiaxun Yang
2023-04-07 22:08 ` Nick Desaulniers
2023-04-07 10:27 ` [PATCH 3/5] MIPS: Detect toolchain support of workarounds in Kconfig Jiaxun Yang
2023-04-07 22:15 ` Nick Desaulniers
2023-04-07 10:27 ` [PATCH 4/5] MIPS: Detect toolchain support of o32 ABI with 64 bit CPU Jiaxun Yang
2023-04-07 22:19 ` Nick Desaulniers
2023-04-07 22:21 ` Nick Desaulniers
2023-04-07 22:26 ` Jiaxun Yang
2023-04-07 10:27 ` [PATCH 5/5] MIPS: Fallback CPU -march CFLAG to ISA level if unsupported Jiaxun Yang
2023-04-07 22:23 ` Nick Desaulniers
2023-04-08 9:47 ` Jiaxun Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230407185723.GA1511753@dev-arch.thelio-3990X \
--to=nathan@kernel.org \
--cc=jiaxun.yang@flygoat.com \
--cc=linux-mips@vger.kernel.org \
--cc=llvm@lists.linux.dev \
--cc=ndesaulniers@google.com \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox