From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org,
"Jiaxun Yang" <jiaxun.yang@flygoat.com>,
"Théo Lebrun" <theo.lebrun@bootlin.com>,
"Vladimir Kondratiev" <vladimir.kondratiev@mobileye.com>,
"Tawfik Bayouk" <tawfik.bayouk@mobileye.com>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
"Gregory CLEMENT" <gregory.clement@bootlin.com>
Subject: [PATCH v2] MIPS: SMP-CPS: Fix address for GCR_ACCESS register for CM3 and later
Date: Mon, 22 Jul 2024 15:15:39 +0200 [thread overview]
Message-ID: <20240722-smp_i6500-v2-1-3101459cba29@bootlin.com> (raw)
When the CM block migrated from CM2.5 to CM3.0, the address offset for
the Global CSR Access Privilege register was modified. We saw this in
the "MIPS64 I6500 Multiprocessing System Programmer's Guide," it is
stated that "the Global CSR Access Privilege register is located at
offset 0x0120" in section 5.4. It is at least the same for I6400.
This fix allows to use the VP cores in SMP mode if the reset values
were modified by the bootloader.
Based on the work of Vladimir Kondratiev
<vladimir.kondratiev@mobileye.com> and the feedback from Jiaxun Yang
<jiaxun.yang@flygoat.com>.
Fixes: 197e89e0984a ("MIPS: mips-cm: Implement mips_cm_revision")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
Changes in v2:
- Based the detection on the CM version and not on a single CPU version
- Renamed the macro accordingly
- Link to v1: https://lore.kernel.org/r/20240719-smp_i6500-v1-1-8738e67d4802@bootlin.com
---
arch/mips/include/asm/mips-cm.h | 4 ++++
arch/mips/kernel/smp-cps.c | 5 ++++-
2 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/mips/include/asm/mips-cm.h b/arch/mips/include/asm/mips-cm.h
index 3d9efc802e36..10e96b119c36 100644
--- a/arch/mips/include/asm/mips-cm.h
+++ b/arch/mips/include/asm/mips-cm.h
@@ -240,6 +240,10 @@ GCR_ACCESSOR_RO(32, 0x0d0, gic_status)
GCR_ACCESSOR_RO(32, 0x0f0, cpc_status)
#define CM_GCR_CPC_STATUS_EX BIT(0)
+/* GCR_ACCESS - Controls core/IOCU access to GCRs */
+GCR_ACCESSOR_RW(32, 0x120, access_cm3)
+#define CM_GCR_ACCESS_ACCESSEN GENMASK(7, 0)
+
/* GCR_L2_CONFIG - Indicates L2 cache configuration when Config5.L2C=1 */
GCR_ACCESSOR_RW(32, 0x130, l2_config)
#define CM_GCR_L2_CONFIG_BYPASS BIT(20)
diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c
index e074138ffd7f..05174aa9881c 100644
--- a/arch/mips/kernel/smp-cps.c
+++ b/arch/mips/kernel/smp-cps.c
@@ -325,7 +325,10 @@ static void boot_core(unsigned int core, unsigned int vpe_id)
write_gcr_co_reset_ext_base(CM_GCR_Cx_RESET_EXT_BASE_UEB);
/* Ensure the core can access the GCRs */
- set_gcr_access(1 << core);
+ if (mips_cm_revision() < CM_REV_CM3)
+ set_gcr_access(1 << core);
+ else
+ set_gcr_access_cm3(1 << core);
if (mips_cpc_present()) {
/* Reset the core */
---
base-commit: 9298d51eb3af24f88b211087eb698399f9efa439
change-id: 20240719-smp_i6500-8cb233878c41
Best regards,
--
Gregory CLEMENT <gregory.clement@bootlin.com>
next reply other threads:[~2024-07-22 13:15 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-22 13:15 Gregory CLEMENT [this message]
2024-07-23 2:42 ` [PATCH v2] MIPS: SMP-CPS: Fix address for GCR_ACCESS register for CM3 and later Jiaxun Yang
2024-07-23 7:32 ` Thomas Bogendoerfer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240722-smp_i6500-v2-1-3101459cba29@bootlin.com \
--to=gregory.clement@bootlin.com \
--cc=jiaxun.yang@flygoat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=paulburton@kernel.org \
--cc=tawfik.bayouk@mobileye.com \
--cc=theo.lebrun@bootlin.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=tsbogend@alpha.franken.de \
--cc=vladimir.kondratiev@mobileye.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox