[PATCH 2/9] mips: dts: realtek: Clean up CPU clocks

[Sander Vanheule <sander@svanheule.net>]

The referenced CPU clock does not require any additional #clock-cells,
so drop the extraneous '0' in the referenced CPU clock.

The binding for MIPS cpus also does not allow for the clock-names
property, so just drop it.

This resolves some error message from 'dtbs_check':
    cpu@0: clocks: [[4], [0]] is too long
    'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Sander Vanheule <sander@svanheule.net>
---
 arch/mips/boot/dts/realtek/rtl838x.dtsi | 3 +--
 arch/mips/boot/dts/realtek/rtl930x.dtsi | 3 +--
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/mips/boot/dts/realtek/rtl838x.dtsi b/arch/mips/boot/dts/realtek/rtl838x.dtsi
index 722106e39194..d2c6baabb38c 100644
--- a/arch/mips/boot/dts/realtek/rtl838x.dtsi
+++ b/arch/mips/boot/dts/realtek/rtl838x.dtsi
@@ -9,8 +9,7 @@ cpu@0 {
 			device_type = "cpu";
 			compatible = "mips,mips4KEc";
 			reg = <0>;
-			clocks = <&baseclk 0>;
-			clock-names = "cpu";
+			clocks = <&baseclk>;
 		};
 	};
 
diff --git a/arch/mips/boot/dts/realtek/rtl930x.dtsi b/arch/mips/boot/dts/realtek/rtl930x.dtsi
index 67261d6fcaa7..f2e57ea3a60c 100644
--- a/arch/mips/boot/dts/realtek/rtl930x.dtsi
+++ b/arch/mips/boot/dts/realtek/rtl930x.dtsi
@@ -26,8 +26,7 @@ cpu@0 {
 			device_type = "cpu";
 			compatible = "mips,mips34Kc";
 			reg = <0>;
-			clocks = <&baseclk 0>;
-			clock-names = "cpu";
+			clocks = <&baseclk>;
 		};
 	};
 
-- 
2.48.1