[PATCH] MIPS: remove unused <asm/mips-boards/sead3-addr.h> header

[PATCH] MIPS: remove unused <asm/mips-boards/sead3-addr.h> header

[Ethan Nelson-Moore]

The last use of arch/mips/include/asm/mips-boards/sead3-addr.h was
removed in commit 64601cb1343f ("leds: Remove SEAD-3 driver") but it
was left behind. Remove it.

Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
---
 .../mips/include/asm/mips-boards/sead3-addr.h | 83 -------------------
 1 file changed, 83 deletions(-)
 delete mode 100644 arch/mips/include/asm/mips-boards/sead3-addr.h

diff --git a/arch/mips/include/asm/mips-boards/sead3-addr.h b/arch/mips/include/asm/mips-boards/sead3-addr.h
deleted file mode 100644
index c0db57802f7c..000000000000
--- a/arch/mips/include/asm/mips-boards/sead3-addr.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2015 Imagination Technologies, Inc.
- *   written by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_BOARDS_SEAD3_ADDR_H
-#define __ASM_MIPS_BOARDS_SEAD3_ADDR_H
-
-/*
- * Target #0 Register Decode
- */
-#define SEAD3_SD_SPDCNF				0xbb000040
-#define SEAD3_SD_SPADDR				0xbb000048
-#define SEAD3_SD_DATA				0xbb000050
-
-/*
- * Target #1 Register Decode
- */
-#define SEAD3_CFG				0xbb100110
-#define SEAD3_GIC_BASE_ADDRESS			0xbb1c0000
-#define SEAD3_SHARED_SECTION			0xbb1c0000
-#define SEAD3_VPE_LOCAL_SECTION			0xbb1c8000
-#define SEAD3_VPE_OTHER_SECTION			0xbb1cc000
-#define SEAD3_USER_MODE_VISIBLE_SECTION		0xbb1d0000
-
-/*
- * Target #3 Register Decode
- */
-#define SEAD3_USB_HS_BASE			0xbb200000
-#define SEAD3_USB_HS_IDENTIFICATION_REGS	0xbb200000
-#define SEAD3_USB_HS_CAPABILITY_REGS		0xbb200100
-#define SEAD3_USB_HS_OPERATIONAL_REGS		0xbb200140
-#define SEAD3_RESERVED				0xbe800000
-
-/*
- * Target #3 Register Decode
- */
-#define SEAD3_SRAM				0xbe000000
-#define SEAD3_OPTIONAL_SRAM			0xbe400000
-#define SEAD3_FPGA				0xbf000000
-
-#define SEAD3_PI_PIC32_USB_STATUS		0xbf000060
-#define   SEAD3_PI_PIC32_USB_STATUS_IO_RDY	(1 << 0)
-#define   SEAD3_PI_PIC32_USB_STATUS_SPL_INT	(1 << 1)
-#define   SEAD3_PI_PIC32_USB_STATUS_GPIOA_INT	(1 << 2)
-#define   SEAD3_PI_PIC32_USB_STATUS_GPIOB_INT	(1 << 3)
-
-#define SEAD3_PI_SOFT_ENDIAN			0xbf000070
-
-#define SEAD3_CPLD_P_SWITCH			0xbf000200
-#define SEAD3_CPLD_F_SWITCH			0xbf000208
-#define SEAD3_CPLD_P_LED			0xbf000210
-#define SEAD3_CPLD_F_LED			0xbf000218
-#define SEAD3_NEWSC_LIVE			0xbf000220
-#define SEAD3_NEWSC_REG				0xbf000228
-#define SEAD3_NEWSC_CTRL			0xbf000230
-
-#define SEAD3_LCD_CONTROL			0xbf000400
-#define SEAD3_LCD_DATA				0xbf000408
-#define SEAD3_CPLD_LCD_STATUS			0xbf000410
-#define SEAD3_CPLD_LCD_DATA			0xbf000418
-
-#define SEAD3_CPLD_PI_DEVRST			0xbf000480
-#define SEAD3_CPLD_PI_DEVRST_IC32_RST		(1 << 0)
-#define SEAD3_RESERVED_0			0xbf000500
-
-#define SEAD3_PIC32_REGISTERS			0xbf000600
-#define SEAD3_RESERVED_1			0xbf000700
-#define SEAD3_UART_CH_0				0xbf000800
-#define SEAD3_UART_CH_1				0xbf000900
-#define SEAD3_RESERVED_2			0xbf000a00
-#define SEAD3_ETHERNET				0xbf010000
-#define SEAD3_RESERVED_3			0xbf020000
-#define SEAD3_USER_EXPANSION			0xbf400000
-#define SEAD3_RESERVED_4			0xbf800000
-#define SEAD3_BOOT_FLASH_EXTENSION		0xbfa00000
-#define SEAD3_BOOT_FLASH			0xbfc00000
-#define SEAD3_REVISION_REGISTER			0xbfc00010
-
-#endif /* __ASM_MIPS_BOARDS_SEAD3_ADDR_H  */
-- 
2.43.0

Re: [PATCH] MIPS: remove unused <asm/mips-boards/sead3-addr.h> header

[Thomas Bogendoerfer]

On Thu, Sep 17, 2026 at 08:00:35PM -0700, Ethan Nelson-Moore wrote:
> The last use of arch/mips/include/asm/mips-boards/sead3-addr.h was
> removed in commit 64601cb1343f ("leds: Remove SEAD-3 driver") but it
> was left behind. Remove it.
> 
> Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
> ---
>  .../mips/include/asm/mips-boards/sead3-addr.h | 83 -------------------
>  1 file changed, 83 deletions(-)
>  delete mode 100644 arch/mips/include/asm/mips-boards/sead3-addr.h

applied to mips-next

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]