From: Adrian Hunter <adrian.hunter@nokia.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>,
Adrian Hunter <adrian.hunter@nokia.com>,
Madhusudhan Chikkature <madhu.cr@ti.com>,
linux-mmc Mailing List <linux-mmc@vger.kernel.org>,
linux-omap Mailing List <linux-omap@vger.kernel.org>,
Pierre Ossman <pierre@ossman.eu>,
Matt Fleming <matt@console-pimps.org>
Subject: [PATCH V3 0/30] mmc and omap_hsmmc patches
Date: Wed, 09 Sep 2009 14:56:33 +0300 [thread overview]
Message-ID: <20090909115633.12833.39619.sendpatchset@ahunter-laptop> (raw)
Hi
Here is version 3 of our 30 patches for mmc and omap_hsmmc.
They exclude Matt Fleming's change for card caps
They split into 2 groups: the first 7 affect mmc core only
and the remaining ones affect omap_hsmmc only.
Madhusudhan Chikkature's patch:
[PATCH V2] omap_hsmmc: Fix for the db clock failure message
still applies cleanly on top.
Adrian Hunter (18):
mmc: add 'enable' and 'disable' methods to mmc host
mmc: allow host claim / release nesting
mmc: add MMC_CAP_NONREMOVABLE host capability
mmc: add ability to save power by powering off cards
mmc: check status after MMC SWITCH command
omap_hsmmc: make use of new enable/disable interface
omap_hsmmc: keep track of power mode
omap_hsmmc: ensure workqueues are empty before suspend
omap_hsmmc: make use of new MMC_CAP_NONREMOVABLE host capability
ARM: OMAP: mmc-twl4030: add regulator sleep / wake function
omap_hsmmc: put MMC regulator to sleep
omap_hsmmc: clear interrupt status after init sequence
omap_hsmmc: cater for weird CMD6 behaviour
omap_hsmmc: prevent races with irq handler
omap_hsmmc: protect the card when the cover is open
omap_hsmmc: ensure all clock enables and disables are paired
omap_hsmmc: set a large data timeout for commands with busy signal
ARM: OMAP: RX51: set MMC capabilities and power-saving flag
Denis Karpov (8):
mmc: power off once at removal
omap_hsmmc: add debugfs entry (host registers)
ARM: OMAP: mmc-twl4030: add context loss counter support
omap_hsmmc: context save/restore support
omap_hsmmc: set open drain bit correctly
omap_hsmmc: support for deeper power saving states
omap_hsmmc: cleanup macro usage
omap_hsmmc: code refactoring
Jarkko Lavinen (4):
mmc: add mmc card sleep and awake support
omap_hsmmc: fix scatter-gather list sanity checking
omap_hsmmc: add mmc card sleep and awake support
omap_hsmmc: fix NULL pointer dereference
arch/arm/mach-omap2/board-rx51-peripherals.c | 4 +
arch/arm/mach-omap2/mmc-twl4030.c | 78 ++
arch/arm/mach-omap2/mmc-twl4030.h | 2 +
arch/arm/plat-omap/include/mach/mmc.h | 11 +
drivers/mmc/core/core.c | 275 +++++++-
drivers/mmc/core/core.h | 4 +
drivers/mmc/core/host.c | 1 +
drivers/mmc/core/host.h | 2 +
drivers/mmc/core/mmc.c | 130 +++-
drivers/mmc/core/mmc_ops.c | 59 ++
drivers/mmc/core/mmc_ops.h | 1 +
drivers/mmc/core/sd.c | 52 ++-
drivers/mmc/host/omap_hsmmc.c | 1035 +++++++++++++++++++++-----
include/linux/mmc/card.h | 2 +
include/linux/mmc/core.h | 1 +
include/linux/mmc/host.h | 58 ++
include/linux/mmc/mmc.h | 3 +
17 files changed, 1503 insertions(+), 215 deletions(-)
Regards
Adrian
next reply other threads:[~2009-09-09 11:56 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-09 11:56 Adrian Hunter [this message]
2009-09-09 11:56 ` [PATCH V3 1/30] mmc: add 'enable' and 'disable' methods to mmc host Adrian Hunter
2009-09-09 11:56 ` [PATCH V3 2/30] mmc: allow host claim / release nesting Adrian Hunter
2009-09-09 11:56 ` [PATCH V3 3/30] mmc: add MMC_CAP_NONREMOVABLE host capability Adrian Hunter
2009-09-09 11:57 ` [PATCH V3 4/30] mmc: add ability to save power by powering off cards Adrian Hunter
2009-09-09 11:57 ` [PATCH V3 5/30] mmc: add mmc card sleep and awake support Adrian Hunter
2009-09-09 11:57 ` [PATCH V3 6/30] mmc: power off once at removal Adrian Hunter
2009-09-09 11:57 ` [PATCH V3 7/30] mmc: check status after MMC SWITCH command Adrian Hunter
2009-09-09 11:57 ` [PATCH V3 8/30] omap_hsmmc: add debugfs entry (host registers) Adrian Hunter
2009-09-09 11:57 ` [PATCH V3 9/30] omap_hsmmc: make use of new enable/disable interface Adrian Hunter
2009-09-09 11:57 ` [PATCH V3 10/30] ARM: OMAP: mmc-twl4030: add context loss counter support Adrian Hunter
2009-09-09 11:57 ` [PATCH V3 11/30] omap_hsmmc: keep track of power mode Adrian Hunter
2009-09-09 11:58 ` [PATCH V3 12/30] omap_hsmmc: context save/restore support Adrian Hunter
2009-09-09 11:58 ` [PATCH V3 13/30] omap_hsmmc: set open drain bit correctly Adrian Hunter
2009-09-09 11:58 ` [PATCH V3 14/30] omap_hsmmc: ensure workqueues are empty before suspend Adrian Hunter
2009-09-09 11:58 ` [PATCH V3 15/30] omap_hsmmc: fix scatter-gather list sanity checking Adrian Hunter
2009-09-09 11:58 ` [PATCH V3 16/30] omap_hsmmc: make use of new MMC_CAP_NONREMOVABLE host capability Adrian Hunter
2009-09-09 11:58 ` [PATCH V3 17/30] omap_hsmmc: support for deeper power saving states Adrian Hunter
2009-09-09 11:58 ` [PATCH V3 18/30] ARM: OMAP: mmc-twl4030: add regulator sleep / wake function Adrian Hunter
2009-09-09 11:58 ` [PATCH V3 19/30] omap_hsmmc: put MMC regulator to sleep Adrian Hunter
2009-09-09 11:59 ` [PATCH V3 20/30] omap_hsmmc: add mmc card sleep and awake support Adrian Hunter
2009-09-09 11:59 ` [PATCH V3 21/30] omap_hsmmc: fix NULL pointer dereference Adrian Hunter
2009-09-09 11:59 ` [PATCH V3 22/30] omap_hsmmc: cleanup macro usage Adrian Hunter
2009-09-09 11:59 ` [PATCH V3 23/30] omap_hsmmc: clear interrupt status after init sequence Adrian Hunter
2009-09-09 11:59 ` [PATCH V3 24/30] omap_hsmmc: cater for weird CMD6 behaviour Adrian Hunter
2009-09-09 11:59 ` [PATCH V3 25/30] omap_hsmmc: prevent races with irq handler Adrian Hunter
2009-09-09 11:59 ` [PATCH V3 26/30] omap_hsmmc: code refactoring Adrian Hunter
2009-09-09 11:59 ` [PATCH V3 27/30] omap_hsmmc: protect the card when the cover is open Adrian Hunter
2009-09-09 12:00 ` [PATCH V3 28/30] omap_hsmmc: ensure all clock enables and disables are paired Adrian Hunter
2009-09-10 22:02 ` Andrew Morton
2009-09-11 8:31 ` Adrian Hunter
2009-09-09 12:00 ` [PATCH V3 29/30] omap_hsmmc: set a large data timeout for commands with busy signal Adrian Hunter
2009-09-09 12:00 ` [PATCH V3 30/30] ARM: OMAP: RX51: set MMC capabilities and power-saving flag Adrian Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090909115633.12833.39619.sendpatchset@ahunter-laptop \
--to=adrian.hunter@nokia.com \
--cc=akpm@linux-foundation.org \
--cc=jarkko.lavinen@nokia.com \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=madhu.cr@ti.com \
--cc=matt@console-pimps.org \
--cc=pierre@ossman.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox