public inbox for linux-mmc@vger.kernel.org
 help / color / mirror / Atom feed
From: Victor Shih <victorshihgli@gmail.com>
To: ulf.hansson@linaro.org, adrian.hunter@intel.com
Cc: linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
	benchuanggli@gmail.com, Lucas.Lai@genesyslogic.com.tw,
	HL.Liu@genesyslogic.com.tw, Greg.tu@genesyslogic.com.tw,
	dlunev@chromium.org, Victor Shih <victorshihgli@gmail.com>,
	Ben Chuang <ben.chuang@genesyslogic.com.tw>,
	AKASHI Takahiro <takahiro.akashi@linaro.org>,
	Victor Shih <victor.shih@genesyslogic.com.tw>
Subject: [PATCH V20 14/22] mmc: sdhci-uhs2: add set_ios()
Date: Thu,  5 Sep 2024 18:19:52 +0800	[thread overview]
Message-ID: <20240905102000.5020-15-victorshihgli@gmail.com> (raw)
In-Reply-To: <20240905102000.5020-1-victorshihgli@gmail.com>

From: Victor Shih <victor.shih@genesyslogic.com.tw>

This is a sdhci version of mmc's set_ios operation.
THis is used to handle basic IO bus setting.
It covers both UHS-I and UHS-II.

Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
---

Updates in V14:
 - Use mmc_card_uhs2() to stead sdhci_uhs2_mode() in the
   sdhci_uhs2_set_ios().

Updates in V13:
 - Add judgment condition for power mode in the __sdhci_uhs2_set_ios().
 - Modify comment message.

Updates in V9:
 - Simplity the turning_on_clk in sdhci_set_ios().

Updates in V8:
 - Add the judgment formula for MMC_TIMING_SPEED_A_HD, MMC_TIMING_SPEED_B
   and MMC_TIMING_SPEED_B_HD in __sdhci_uhs2_set_ios().
 - Add the switch case for MMC_TIMING_SPEED_A_HD, MMC_TIMING_SPEED_B
   and MMC_TIMING_SPEED_B_HD in sdhci_get_preset_value().
 - mmc_opt_regulator_set_ocr() to instead of mmc_regulator_set_ocr()
   in sdhci_uhs2_set_ios().

Updates in V7:
 - Remove unnecessary functions.

Updates in V6:
 - Modify return value in some functions.
 - Remove unnecessary functions.

---

 drivers/mmc/host/sdhci-uhs2.c | 95 +++++++++++++++++++++++++++++++++++
 drivers/mmc/host/sdhci-uhs2.h |  1 +
 drivers/mmc/host/sdhci.c      | 55 ++++++++++++--------
 drivers/mmc/host/sdhci.h      |  2 +
 4 files changed, 132 insertions(+), 21 deletions(-)

diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c
index 8bd2baa79d76..abb56ab8f916 100644
--- a/drivers/mmc/host/sdhci-uhs2.c
+++ b/drivers/mmc/host/sdhci-uhs2.c
@@ -207,6 +207,101 @@ void sdhci_uhs2_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
 }
 EXPORT_SYMBOL_GPL(sdhci_uhs2_set_timeout);
 
+/**
+ * sdhci_uhs2_clear_set_irqs - set Error Interrupt Status Enable register
+ * @host:	SDHCI host
+ * @clear:	bit-wise clear mask
+ * @set:	bit-wise set mask
+ *
+ * Set/unset bits in UHS-II Error Interrupt Status Enable register
+ */
+void sdhci_uhs2_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set)
+{
+	u32 ier;
+
+	ier = sdhci_readl(host, SDHCI_UHS2_INT_STATUS_ENABLE);
+	ier &= ~clear;
+	ier |= set;
+	sdhci_writel(host, ier, SDHCI_UHS2_INT_STATUS_ENABLE);
+	sdhci_writel(host, ier, SDHCI_UHS2_INT_SIGNAL_ENABLE);
+}
+EXPORT_SYMBOL_GPL(sdhci_uhs2_clear_set_irqs);
+
+static void __sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	u8 cmd_res, dead_lock;
+	u16 ctrl_2;
+
+	/* UHS2 Timeout Control */
+	sdhci_calc_timeout_uhs2(host, &cmd_res, &dead_lock);
+
+	/* change to use calculate value */
+	cmd_res |= FIELD_PREP(SDHCI_UHS2_TIMER_CTRL_DEADLOCK_MASK, dead_lock);
+
+	sdhci_uhs2_clear_set_irqs(host,
+				  SDHCI_UHS2_INT_CMD_TIMEOUT |
+				  SDHCI_UHS2_INT_DEADLOCK_TIMEOUT,
+				  0);
+	sdhci_writeb(host, cmd_res, SDHCI_UHS2_TIMER_CTRL);
+	sdhci_uhs2_clear_set_irqs(host, 0,
+				  SDHCI_UHS2_INT_CMD_TIMEOUT |
+				  SDHCI_UHS2_INT_DEADLOCK_TIMEOUT);
+
+	/* UHS2 timing. Note, UHS2 timing is disabled when powering off */
+	ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+	if (ios->power_mode != MMC_POWER_OFF &&
+	    (ios->timing == MMC_TIMING_UHS2_SPEED_A ||
+	     ios->timing == MMC_TIMING_UHS2_SPEED_A_HD ||
+	     ios->timing == MMC_TIMING_UHS2_SPEED_B ||
+	     ios->timing == MMC_TIMING_UHS2_SPEED_B_HD))
+		ctrl_2 |= SDHCI_CTRL_UHS2 | SDHCI_CTRL_UHS2_ENABLE;
+	else
+		ctrl_2 &= ~(SDHCI_CTRL_UHS2 | SDHCI_CTRL_UHS2_ENABLE);
+	sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+	host->timing = ios->timing;
+
+	if (!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN))
+		sdhci_enable_preset_value(host, true);
+
+	if (host->ops->set_power)
+		host->ops->set_power(host, ios->power_mode, ios->vdd);
+	else
+		sdhci_uhs2_set_power(host, ios->power_mode, ios->vdd);
+
+	sdhci_set_clock(host, host->clock);
+}
+
+static int sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+
+	pr_debug("%s: clock %uHz powermode %u Vdd %u timing %u\n",
+		 mmc_hostname(mmc), ios->clock, ios->power_mode, ios->vdd, ios->timing);
+
+	if (!mmc_card_uhs2(mmc)) {
+		sdhci_set_ios(mmc, ios);
+		return 0;
+	}
+
+	if (ios->power_mode == MMC_POWER_UNDEFINED)
+		return 0;
+
+	if (host->flags & SDHCI_DEVICE_DEAD) {
+		if (ios->power_mode == MMC_POWER_OFF) {
+			mmc_opt_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
+			mmc_regulator_set_vqmmc2(mmc, ios);
+		}
+		return -1;
+	}
+
+	sdhci_set_ios_common(mmc, ios);
+
+	__sdhci_uhs2_set_ios(mmc, ios);
+
+	return 0;
+}
+
 /*****************************************************************************\
  *                                                                           *
  * Driver init/exit                                                          *
diff --git a/drivers/mmc/host/sdhci-uhs2.h b/drivers/mmc/host/sdhci-uhs2.h
index 9bd3f610cf8c..f6649a518842 100644
--- a/drivers/mmc/host/sdhci-uhs2.h
+++ b/drivers/mmc/host/sdhci-uhs2.h
@@ -181,5 +181,6 @@ void sdhci_uhs2_dump_regs(struct sdhci_host *host);
 void sdhci_uhs2_reset(struct sdhci_host *host, u16 mask);
 void sdhci_uhs2_set_power(struct sdhci_host *host, unsigned char mode, unsigned short vdd);
 void sdhci_uhs2_set_timeout(struct sdhci_host *host, struct mmc_command *cmd);
+void sdhci_uhs2_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set);
 
 #endif /* __SDHCI_UHS2_H */
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 366c3d30dba6..63fa1714930a 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -47,8 +47,6 @@
 static unsigned int debug_quirks = 0;
 static unsigned int debug_quirks2;
 
-static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
-
 static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd);
 
 void sdhci_dumpregs(struct sdhci_host *host)
@@ -1877,6 +1875,12 @@ static u16 sdhci_get_preset_value(struct sdhci_host *host)
 	case MMC_TIMING_MMC_HS400:
 		preset = sdhci_readw(host, SDHCI_PRESET_FOR_HS400);
 		break;
+	case MMC_TIMING_UHS2_SPEED_A:
+	case MMC_TIMING_UHS2_SPEED_A_HD:
+	case MMC_TIMING_UHS2_SPEED_B:
+	case MMC_TIMING_UHS2_SPEED_B_HD:
+		preset = sdhci_readw(host, SDHCI_PRESET_FOR_UHS2);
+		break;
 	default:
 		pr_warn("%s: Invalid UHS-I mode selected\n",
 			mmc_hostname(host->mmc));
@@ -2323,24 +2327,9 @@ static bool sdhci_presetable_values_change(struct sdhci_host *host, struct mmc_i
 	       (sdhci_preset_needed(host, ios->timing) || host->drv_type != ios->drv_type);
 }
 
-void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+void sdhci_set_ios_common(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct sdhci_host *host = mmc_priv(mmc);
-	bool reinit_uhs = host->reinit_uhs;
-	bool turning_on_clk = false;
-	u8 ctrl;
-
-	host->reinit_uhs = false;
-
-	if (ios->power_mode == MMC_POWER_UNDEFINED)
-		return;
-
-	if (host->flags & SDHCI_DEVICE_DEAD) {
-		if (!IS_ERR(mmc->supply.vmmc) &&
-		    ios->power_mode == MMC_POWER_OFF)
-			mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
-		return;
-	}
 
 	/*
 	 * Reset the chip on each power off.
@@ -2357,8 +2346,6 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		sdhci_enable_preset_value(host, false);
 
 	if (!ios->clock || ios->clock != host->clock) {
-		turning_on_clk = ios->clock && !host->clock;
-
 		host->ops->set_clock(host, ios->clock);
 		host->clock = ios->clock;
 
@@ -2374,6 +2361,31 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 			mmc->max_busy_timeout /= host->timeout_clk;
 		}
 	}
+}
+EXPORT_SYMBOL_GPL(sdhci_set_ios_common);
+
+void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	bool reinit_uhs = host->reinit_uhs;
+	bool turning_on_clk;
+	u8 ctrl;
+
+	host->reinit_uhs = false;
+
+	if (ios->power_mode == MMC_POWER_UNDEFINED)
+		return;
+
+	if (host->flags & SDHCI_DEVICE_DEAD) {
+		if (!IS_ERR(mmc->supply.vmmc) &&
+		    ios->power_mode == MMC_POWER_OFF)
+			mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
+		return;
+	}
+
+	turning_on_clk = ios->clock != host->clock && ios->clock && !host->clock;
+
+	sdhci_set_ios_common(mmc, ios);
 
 	if (host->ops->set_power)
 		host->ops->set_power(host, ios->power_mode, ios->vdd);
@@ -2942,7 +2954,7 @@ int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 }
 EXPORT_SYMBOL_GPL(sdhci_execute_tuning);
 
-static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
+void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
 {
 	/* Host Controller v3.00 defines preset value registers */
 	if (host->version < SDHCI_SPEC_300)
@@ -2970,6 +2982,7 @@ static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
 		host->preset_enabled = enable;
 	}
 }
+EXPORT_SYMBOL_GPL(sdhci_enable_preset_value);
 
 static void sdhci_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
 				int err)
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 0f78708d0c70..5c66927210bd 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -848,6 +848,8 @@ void sdhci_reset(struct sdhci_host *host, u8 mask);
 void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
 int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
 int __sdhci_execute_tuning(struct sdhci_host *host, u32 opcode);
+void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
+void sdhci_set_ios_common(struct mmc_host *mmc, struct mmc_ios *ios);
 void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
 int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
 				      struct mmc_ios *ios);
-- 
2.25.1


  parent reply	other threads:[~2024-09-05 10:21 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-09-05 10:19 [PATCH V20 00/22] Add support UHS-II for GL9755 and GL9767 Victor Shih
2024-09-05 10:19 ` [PATCH V20 01/22] mmc: core: Cleanup printing of speed mode at card insertion Victor Shih
2024-09-05 10:19 ` [PATCH V20 02/22] mmc: core: Prepare to support SD UHS-II cards Victor Shih
2024-09-05 10:19 ` [PATCH V20 03/22] mmc: core: Announce successful insertion of an SD UHS-II card Victor Shih
2024-09-05 10:19 ` [PATCH V20 04/22] mmc: core: Extend support for mmc regulators with a vqmmc2 Victor Shih
2024-09-05 10:19 ` [PATCH V20 05/22] mmc: core: Add definitions for SD UHS-II cards Victor Shih
2024-09-05 10:19 ` [PATCH V20 06/22] mmc: core: Add New function to re-factoring the code Victor Shih
2024-09-05 10:19 ` [PATCH V20 07/22] mmc: core: Support UHS-II card control and access Victor Shih
2024-09-05 10:19 ` [PATCH V20 08/22] mmc: sdhci: add UHS-II related definitions in headers Victor Shih
2024-09-05 10:19 ` [PATCH V20 09/22] mmc: sdhci: add UHS-II module and add a kernel configuration Victor Shih
2024-09-05 10:19 ` [PATCH V20 10/22] mmc: sdhci-uhs2: dump UHS-II registers Victor Shih
2024-09-05 10:19 ` [PATCH V20 11/22] mmc: sdhci-uhs2: add reset function Victor Shih
2024-09-05 10:19 ` [PATCH V20 12/22] mmc: sdhci-uhs2: add set_power() to support vdd2 Victor Shih
2024-09-05 10:19 ` [PATCH V20 13/22] mmc: sdhci-uhs2: add set_timeout() Victor Shih
2024-09-05 10:19 ` Victor Shih [this message]
2024-09-05 10:19 ` [PATCH V20 15/22] mmc: sdhci-uhs2: add uhs2_control() to initialise the interface Victor Shih
2024-09-05 10:19 ` [PATCH V20 16/22] mmc: sdhci-uhs2: add request() and others Victor Shih
2024-09-05 10:19 ` [PATCH V20 17/22] mmc: sdhci-uhs2: add irq() " Victor Shih
2024-09-05 10:19 ` [PATCH V20 18/22] mmc: sdhci-uhs2: add add_host() and others to set up the driver Victor Shih
2024-09-05 10:19 ` [PATCH V20 19/22] mmc: sdhci-uhs2: add pre-detect_init hook Victor Shih
2024-09-05 10:19 ` [PATCH V20 20/22] mmc: sdhci-pci: add UHS-II support framework Victor Shih
2024-09-05 10:19 ` [PATCH V20 21/22] mmc: sdhci-pci-gli: enable UHS-II mode for GL9755 Victor Shih
2024-09-05 13:55   ` Adrian Hunter
2024-09-06  9:58     ` Victor Shih
2024-09-05 10:20 ` [PATCH V20 22/22] mmc: sdhci-pci-gli: enable UHS-II mode for GL9767 Victor Shih
2024-09-05 13:58 ` [PATCH V20 00/22] Add support UHS-II for GL9755 and GL9767 Adrian Hunter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240905102000.5020-15-victorshihgli@gmail.com \
    --to=victorshihgli@gmail.com \
    --cc=Greg.tu@genesyslogic.com.tw \
    --cc=HL.Liu@genesyslogic.com.tw \
    --cc=Lucas.Lai@genesyslogic.com.tw \
    --cc=adrian.hunter@intel.com \
    --cc=ben.chuang@genesyslogic.com.tw \
    --cc=benchuanggli@gmail.com \
    --cc=dlunev@chromium.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=takahiro.akashi@linaro.org \
    --cc=ulf.hansson@linaro.org \
    --cc=victor.shih@genesyslogic.com.tw \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox