public inbox for linux-mmc@vger.kernel.org
 help / color / mirror / Atom feed
From: Victor Shih <victorshihgli@gmail.com>
To: ulf.hansson@linaro.org, adrian.hunter@intel.com
Cc: linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
	benchuanggli@gmail.com, Lucas.Lai@genesyslogic.com.tw,
	HL.Liu@genesyslogic.com.tw, Greg.tu@genesyslogic.com.tw,
	dlunev@chromium.org, Victor Shih <victorshihgli@gmail.com>
Subject: [PATCH V20 04/22] mmc: core: Extend support for mmc regulators with a vqmmc2
Date: Thu,  5 Sep 2024 18:19:42 +0800	[thread overview]
Message-ID: <20240905102000.5020-5-victorshihgli@gmail.com> (raw)
In-Reply-To: <20240905102000.5020-1-victorshihgli@gmail.com>

From: Ulf Hansson <ulf.hansson@linaro.org>

To allow an additional external regulator to be controlled by an mmc host
driver, let's add support for a vqmmc2 regulator to the mmc core.

For an SD UHS-II interface the vqmmc2 regulator may correspond to the so
called vdd2 supply, as described by the SD spec. Initially, only 1.8V is
needed, hence limit the new helper function, mmc_regulator_set_vqmmc2() to
this too.

Note that, to allow for flexibility mmc host drivers need to manage the
enable/disable of the vqmmc2 regulator themselves, while the regulator is
looked up through the common mmc_regulator_get_supply().

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---

Updates in V10:
 - Modify the commit message.

Updates in V4:
 - Moved the voltage defines into this patch.

---

 drivers/mmc/core/regulator.c | 34 ++++++++++++++++++++++++++++++++++
 include/linux/mmc/host.h     | 11 +++++++++++
 2 files changed, 45 insertions(+)

diff --git a/drivers/mmc/core/regulator.c b/drivers/mmc/core/regulator.c
index 005247a49e51..208c27cfa505 100644
--- a/drivers/mmc/core/regulator.c
+++ b/drivers/mmc/core/regulator.c
@@ -226,6 +226,33 @@ int mmc_regulator_set_vqmmc(struct mmc_host *mmc, struct mmc_ios *ios)
 }
 EXPORT_SYMBOL_GPL(mmc_regulator_set_vqmmc);
 
+/**
+ * mmc_regulator_set_vqmmc2 - Set vqmmc2 as per the ios->vqmmc2_voltage
+ * @mmc: The mmc host to regulate
+ * @ios: The io bus settings
+ *
+ * Sets a new voltage level for the vqmmc2 regulator, which may correspond to
+ * the vdd2 regulator for an SD UHS-II interface. This function is expected to
+ * be called by mmc host drivers.
+ *
+ * Returns a negative error code on failure, zero if the voltage level was
+ * changed successfully or a positive value if the level didn't need to change.
+ */
+int mmc_regulator_set_vqmmc2(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	if (IS_ERR(mmc->supply.vqmmc2))
+		return -EINVAL;
+
+	switch (ios->vqmmc2_voltage) {
+	case MMC_VQMMC2_VOLTAGE_180:
+		return mmc_regulator_set_voltage_if_supported(
+			mmc->supply.vqmmc2, 1700000, 1800000, 1950000);
+	default:
+		return -EINVAL;
+	}
+}
+EXPORT_SYMBOL_GPL(mmc_regulator_set_vqmmc2);
+
 #else
 
 static inline int mmc_regulator_get_ocrmask(struct regulator *supply)
@@ -252,6 +279,7 @@ int mmc_regulator_get_supply(struct mmc_host *mmc)
 
 	mmc->supply.vmmc = devm_regulator_get_optional(dev, "vmmc");
 	mmc->supply.vqmmc = devm_regulator_get_optional(dev, "vqmmc");
+	mmc->supply.vqmmc2 = devm_regulator_get_optional(dev, "vqmmc2");
 
 	if (IS_ERR(mmc->supply.vmmc)) {
 		if (PTR_ERR(mmc->supply.vmmc) == -EPROBE_DEFER)
@@ -271,6 +299,12 @@ int mmc_regulator_get_supply(struct mmc_host *mmc)
 		dev_dbg(dev, "No vqmmc regulator found\n");
 	}
 
+	if (IS_ERR(mmc->supply.vqmmc2)) {
+		if (PTR_ERR(mmc->supply.vqmmc2) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		dev_dbg(dev, "No vqmmc2 regulator found\n");
+	}
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(mmc_regulator_get_supply);
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index f1cf09ea1f72..841f0ba850aa 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -74,6 +74,9 @@ struct mmc_ios {
 #define MMC_SIGNAL_VOLTAGE_180	1
 #define MMC_SIGNAL_VOLTAGE_120	2
 
+	unsigned char	vqmmc2_voltage;
+#define MMC_VQMMC2_VOLTAGE_180	0
+
 	unsigned char	drv_type;		/* driver type (A, B, C, D) */
 
 #define MMC_SET_DRIVER_TYPE_B	0
@@ -307,6 +310,7 @@ struct mmc_pwrseq;
 struct mmc_supply {
 	struct regulator *vmmc;		/* Card power supply */
 	struct regulator *vqmmc;	/* Optional Vccq supply */
+	struct regulator *vqmmc2;	/* Optional supply for phy */
 };
 
 struct mmc_ctx {
@@ -589,6 +593,7 @@ int mmc_regulator_set_ocr(struct mmc_host *mmc,
 			struct regulator *supply,
 			unsigned short vdd_bit);
 int mmc_regulator_set_vqmmc(struct mmc_host *mmc, struct mmc_ios *ios);
+int mmc_regulator_set_vqmmc2(struct mmc_host *mmc, struct mmc_ios *ios);
 #else
 static inline int mmc_regulator_set_ocr(struct mmc_host *mmc,
 				 struct regulator *supply,
@@ -602,6 +607,12 @@ static inline int mmc_regulator_set_vqmmc(struct mmc_host *mmc,
 {
 	return -EINVAL;
 }
+
+static inline int mmc_regulator_set_vqmmc2(struct mmc_host *mmc,
+					   struct mmc_ios *ios)
+{
+	return -EINVAL;
+}
 #endif
 
 int mmc_regulator_get_supply(struct mmc_host *mmc);
-- 
2.25.1


  parent reply	other threads:[~2024-09-05 10:20 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-09-05 10:19 [PATCH V20 00/22] Add support UHS-II for GL9755 and GL9767 Victor Shih
2024-09-05 10:19 ` [PATCH V20 01/22] mmc: core: Cleanup printing of speed mode at card insertion Victor Shih
2024-09-05 10:19 ` [PATCH V20 02/22] mmc: core: Prepare to support SD UHS-II cards Victor Shih
2024-09-05 10:19 ` [PATCH V20 03/22] mmc: core: Announce successful insertion of an SD UHS-II card Victor Shih
2024-09-05 10:19 ` Victor Shih [this message]
2024-09-05 10:19 ` [PATCH V20 05/22] mmc: core: Add definitions for SD UHS-II cards Victor Shih
2024-09-05 10:19 ` [PATCH V20 06/22] mmc: core: Add New function to re-factoring the code Victor Shih
2024-09-05 10:19 ` [PATCH V20 07/22] mmc: core: Support UHS-II card control and access Victor Shih
2024-09-05 10:19 ` [PATCH V20 08/22] mmc: sdhci: add UHS-II related definitions in headers Victor Shih
2024-09-05 10:19 ` [PATCH V20 09/22] mmc: sdhci: add UHS-II module and add a kernel configuration Victor Shih
2024-09-05 10:19 ` [PATCH V20 10/22] mmc: sdhci-uhs2: dump UHS-II registers Victor Shih
2024-09-05 10:19 ` [PATCH V20 11/22] mmc: sdhci-uhs2: add reset function Victor Shih
2024-09-05 10:19 ` [PATCH V20 12/22] mmc: sdhci-uhs2: add set_power() to support vdd2 Victor Shih
2024-09-05 10:19 ` [PATCH V20 13/22] mmc: sdhci-uhs2: add set_timeout() Victor Shih
2024-09-05 10:19 ` [PATCH V20 14/22] mmc: sdhci-uhs2: add set_ios() Victor Shih
2024-09-05 10:19 ` [PATCH V20 15/22] mmc: sdhci-uhs2: add uhs2_control() to initialise the interface Victor Shih
2024-09-05 10:19 ` [PATCH V20 16/22] mmc: sdhci-uhs2: add request() and others Victor Shih
2024-09-05 10:19 ` [PATCH V20 17/22] mmc: sdhci-uhs2: add irq() " Victor Shih
2024-09-05 10:19 ` [PATCH V20 18/22] mmc: sdhci-uhs2: add add_host() and others to set up the driver Victor Shih
2024-09-05 10:19 ` [PATCH V20 19/22] mmc: sdhci-uhs2: add pre-detect_init hook Victor Shih
2024-09-05 10:19 ` [PATCH V20 20/22] mmc: sdhci-pci: add UHS-II support framework Victor Shih
2024-09-05 10:19 ` [PATCH V20 21/22] mmc: sdhci-pci-gli: enable UHS-II mode for GL9755 Victor Shih
2024-09-05 13:55   ` Adrian Hunter
2024-09-06  9:58     ` Victor Shih
2024-09-05 10:20 ` [PATCH V20 22/22] mmc: sdhci-pci-gli: enable UHS-II mode for GL9767 Victor Shih
2024-09-05 13:58 ` [PATCH V20 00/22] Add support UHS-II for GL9755 and GL9767 Adrian Hunter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240905102000.5020-5-victorshihgli@gmail.com \
    --to=victorshihgli@gmail.com \
    --cc=Greg.tu@genesyslogic.com.tw \
    --cc=HL.Liu@genesyslogic.com.tw \
    --cc=Lucas.Lai@genesyslogic.com.tw \
    --cc=adrian.hunter@intel.com \
    --cc=benchuanggli@gmail.com \
    --cc=dlunev@chromium.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox