Linux-mtd Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Ivan Mikhaylov <i.mikhaylov@yadro.com>
To: Tudor Ambarus <tudor.ambarus@microchip.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	Vignesh Raghavendra <vigneshr@ti.com>
Cc: Ivan Mikhaylov <i.mikhaylov@yadro.com>,
	linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [RESEND PATCH 1/2] mtd: spi-nor: do not touch TB bit without SPI_NOR_HAS_TB
Date: Mon, 21 Sep 2020 14:24:49 +0300	[thread overview]
Message-ID: <20200921112450.4824-2-i.mikhaylov@yadro.com> (raw)
In-Reply-To: <20200921112450.4824-1-i.mikhaylov@yadro.com>

Some chips like macronix don't have TB(Top/Bottom protection)
bit in the status register. Do not write tb_mask inside status
register, unless SPI_NOR_HAS_TB is present for the chip.

Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
---
 drivers/mtd/spi-nor/core.c | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 0369d98b2d12..f9853dd566dc 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -1735,13 +1735,18 @@ static int spi_nor_sr_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
 			return -EINVAL;
 	}
 
-	status_new = (status_old & ~mask & ~tb_mask) | val;
+	if (nor->flags & SNOR_F_HAS_SR_TB)
+		status_new = (status_old & ~mask & ~tb_mask) | val;
+	else
+		status_new = (status_old & ~mask) | val;
 
 	/* Disallow further writes if WP pin is asserted */
 	status_new |= SR_SRWD;
 
-	if (!use_top)
-		status_new |= tb_mask;
+	if (!use_top) {
+		if (nor->flags & SNOR_F_HAS_SR_TB)
+			status_new |= tb_mask;
+	}
 
 	/* Don't bother if they're the same */
 	if (status_new == status_old)
@@ -1817,14 +1822,19 @@ static int spi_nor_sr_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len)
 			return -EINVAL;
 	}
 
-	status_new = (status_old & ~mask & ~tb_mask) | val;
+	if (nor->flags & SNOR_F_HAS_SR_TB)
+		status_new = (status_old & ~mask & ~tb_mask) | val;
+	else
+		status_new = (status_old & ~mask) | val;
 
 	/* Don't protect status register if we're fully unlocked */
 	if (lock_len == 0)
 		status_new &= ~SR_SRWD;
 
-	if (!use_top)
-		status_new |= tb_mask;
+	if (!use_top) {
+		if (nor->flags & SNOR_F_HAS_SR_TB)
+			status_new |= tb_mask;
+	}
 
 	/* Don't bother if they're the same */
 	if (status_new == status_old)
-- 
2.21.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply	other threads:[~2020-09-21 11:21 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-21 11:24 [RESEND PATCH 0/2] enable lock interface for macronix chips Ivan Mikhaylov
2020-09-21 11:24 ` Ivan Mikhaylov [this message]
2020-09-30  9:36   ` [RESEND PATCH 1/2] mtd: spi-nor: do not touch TB bit without SPI_NOR_HAS_TB Vignesh Raghavendra
2020-09-30 13:07     ` Ivan Mikhaylov
2020-09-30 14:00       ` Vignesh Raghavendra
2020-09-30 16:22         ` Ivan Mikhaylov
2020-09-21 11:24 ` [RESEND PATCH 2/2] mtd: spi-nor: enable lock interface for macronix chips Ivan Mikhaylov
2020-09-30  9:40   ` Vignesh Raghavendra
2020-09-30 13:09     ` Ivan Mikhaylov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200921112450.4824-2-i.mikhaylov@yadro.com \
    --to=i.mikhaylov@yadro.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=tudor.ambarus@microchip.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox