From: cel@kernel.org
To: NeilBrown <neil@brown.name>, Jeff Layton <jlayton@kernel.org>,
Olga Kornievskaia <okorniev@redhat.com>,
Dai Ngo <dai.ngo@oracle.com>, Tom Talpey <tom@talpey.com>,
Anna Schumaker <anna@kernel.org>
Cc: <linux-nfs@vger.kernel.org>, <linux-rdma@vger.kernel.org>,
Chuck Lever <chuck.lever@oracle.com>
Subject: [PATCH v4 12/14] NFSD: Remove NFSSVC_MAXBLKSIZE_V2 macro
Date: Mon, 28 Apr 2025 15:37:00 -0400 [thread overview]
Message-ID: <20250428193702.5186-13-cel@kernel.org> (raw)
In-Reply-To: <20250428193702.5186-1-cel@kernel.org>
From: Chuck Lever <chuck.lever@oracle.com>
The 8192-byte maximum is a protocol-defined limit, and we already
have a symbolic constant defined whose name matches the name of
the limit defined in the protocol. Replace the duplicate.
No change in behavior is expected.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
---
fs/nfsd/nfsd.h | 2 --
fs/nfsd/nfsproc.c | 4 ++--
fs/nfsd/nfsxdr.c | 4 ++--
3 files changed, 4 insertions(+), 6 deletions(-)
diff --git a/fs/nfsd/nfsd.h b/fs/nfsd/nfsd.h
index 91d144655351..2c85b3efe977 100644
--- a/fs/nfsd/nfsd.h
+++ b/fs/nfsd/nfsd.h
@@ -47,8 +47,6 @@ bool nfsd_support_version(int vers);
* Maximum blocksizes supported by daemon under various circumstances.
*/
#define NFSSVC_MAXBLKSIZE RPCSVC_MAXPAYLOAD
-/* NFSv2 is limited by the protocol specification, see RFC 1094 */
-#define NFSSVC_MAXBLKSIZE_V2 (8*1024)
struct readdir_cd {
__be32 err; /* 0, nfserr, or nfserr_eof */
diff --git a/fs/nfsd/nfsproc.c b/fs/nfsd/nfsproc.c
index 6dda081eb24c..5d842671fe6f 100644
--- a/fs/nfsd/nfsproc.c
+++ b/fs/nfsd/nfsproc.c
@@ -211,7 +211,7 @@ nfsd_proc_read(struct svc_rqst *rqstp)
SVCFH_fmt(&argp->fh),
argp->count, argp->offset);
- argp->count = min_t(u32, argp->count, NFSSVC_MAXBLKSIZE_V2);
+ argp->count = min_t(u32, argp->count, NFS_MAXDATA);
argp->count = min_t(u32, argp->count, rqstp->rq_res.buflen);
resp->pages = rqstp->rq_next_page;
@@ -739,7 +739,7 @@ static const struct svc_procedure nfsd_procedures2[18] = {
.pc_argzero = sizeof(struct nfsd_readargs),
.pc_ressize = sizeof(struct nfsd_readres),
.pc_cachetype = RC_NOCACHE,
- .pc_xdrressize = ST+AT+1+NFSSVC_MAXBLKSIZE_V2/4,
+ .pc_xdrressize = ST+AT+1+NFS_MAXDATA/4,
.pc_name = "READ",
},
[NFSPROC_WRITECACHE] = {
diff --git a/fs/nfsd/nfsxdr.c b/fs/nfsd/nfsxdr.c
index 5777f40c7353..fc262ceafca9 100644
--- a/fs/nfsd/nfsxdr.c
+++ b/fs/nfsd/nfsxdr.c
@@ -336,7 +336,7 @@ nfssvc_decode_writeargs(struct svc_rqst *rqstp, struct xdr_stream *xdr)
/* opaque data */
if (xdr_stream_decode_u32(xdr, &args->len) < 0)
return false;
- if (args->len > NFSSVC_MAXBLKSIZE_V2)
+ if (args->len > NFS_MAXDATA)
return false;
return xdr_stream_subsegment(xdr, &args->payload, args->len);
@@ -540,7 +540,7 @@ nfssvc_encode_statfsres(struct svc_rqst *rqstp, struct xdr_stream *xdr)
p = xdr_reserve_space(xdr, XDR_UNIT * 5);
if (!p)
return false;
- *p++ = cpu_to_be32(NFSSVC_MAXBLKSIZE_V2);
+ *p++ = cpu_to_be32(NFS_MAXDATA);
*p++ = cpu_to_be32(stat->f_bsize);
*p++ = cpu_to_be32(stat->f_blocks);
*p++ = cpu_to_be32(stat->f_bfree);
--
2.49.0
next prev parent reply other threads:[~2025-04-28 19:37 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-28 19:36 [PATCH v4 00/14] Allocate payload arrays dynamically cel
2025-04-28 19:36 ` [PATCH v4 01/14] svcrdma: Reduce the number of rdma_rw contexts per-QP cel
2025-05-06 13:08 ` Christoph Hellwig
2025-05-06 13:17 ` Jason Gunthorpe
2025-05-06 13:40 ` Christoph Hellwig
2025-05-06 13:55 ` Jason Gunthorpe
2025-05-06 14:13 ` Chuck Lever
2025-05-06 14:17 ` Jason Gunthorpe
2025-05-06 14:19 ` Chuck Lever
2025-05-06 14:22 ` Jason Gunthorpe
2025-05-08 8:41 ` Edward Srouji
2025-05-08 12:43 ` Jason Gunthorpe
2025-05-10 23:12 ` Edward Srouji
2025-04-28 19:36 ` [PATCH v4 02/14] sunrpc: Add a helper to derive maxpages from sv_max_mesg cel
2025-05-06 13:10 ` Christoph Hellwig
2025-04-28 19:36 ` [PATCH v4 03/14] sunrpc: Remove backchannel check in svc_init_buffer() cel
2025-05-06 13:11 ` Christoph Hellwig
2025-04-28 19:36 ` [PATCH v4 04/14] sunrpc: Replace the rq_pages array with dynamically-allocated memory cel
2025-04-30 4:53 ` NeilBrown
2025-04-28 19:36 ` [PATCH v4 05/14] sunrpc: Replace the rq_vec " cel
2025-05-06 13:29 ` Christoph Hellwig
2025-05-06 16:31 ` Chuck Lever
2025-05-07 7:34 ` Christoph Hellwig
2025-04-28 19:36 ` [PATCH v4 06/14] sunrpc: Replace the rq_bvec " cel
2025-04-28 19:36 ` [PATCH v4 07/14] sunrpc: Adjust size of socket's receive page array dynamically cel
2025-04-28 19:36 ` [PATCH v4 08/14] svcrdma: Adjust the number of entries in svc_rdma_recv_ctxt::rc_pages cel
2025-05-06 13:31 ` Christoph Hellwig
2025-05-06 15:20 ` Chuck Lever
2025-05-07 7:40 ` Christoph Hellwig
2025-04-28 19:36 ` [PATCH v4 09/14] svcrdma: Adjust the number of entries in svc_rdma_send_ctxt::sc_pages cel
2025-04-28 19:36 ` [PATCH v4 10/14] sunrpc: Remove the RPCSVC_MAXPAGES macro cel
2025-04-28 19:36 ` [PATCH v4 11/14] NFSD: Remove NFSD_BUFSIZE cel
2025-04-28 21:03 ` Jeff Layton
2025-05-06 13:32 ` Christoph Hellwig
2025-04-28 19:37 ` cel [this message]
2025-05-06 13:33 ` [PATCH v4 12/14] NFSD: Remove NFSSVC_MAXBLKSIZE_V2 macro Christoph Hellwig
2025-04-28 19:37 ` [PATCH v4 13/14] NFSD: Add a "default" block size cel
2025-04-28 21:07 ` Jeff Layton
2025-04-28 19:37 ` [PATCH v4 14/14] SUNRPC: Bump the maximum payload size for the server cel
2025-04-28 21:08 ` Jeff Layton
2025-04-29 15:44 ` Chuck Lever
2025-05-06 13:34 ` Christoph Hellwig
2025-05-06 13:52 ` Chuck Lever
2025-05-06 13:54 ` Jeff Layton
2025-05-06 13:59 ` Chuck Lever
2025-05-07 7:42 ` Christoph Hellwig
2025-05-07 14:25 ` Chuck Lever
2025-04-29 13:06 ` [PATCH v4 00/14] Allocate payload arrays dynamically Zhu Yanjun
2025-04-29 13:41 ` Chuck Lever
2025-04-29 13:52 ` Zhu Yanjun
2025-04-30 5:11 ` NeilBrown
2025-04-30 12:45 ` Chuck Lever
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250428193702.5186-13-cel@kernel.org \
--to=cel@kernel.org \
--cc=anna@kernel.org \
--cc=chuck.lever@oracle.com \
--cc=dai.ngo@oracle.com \
--cc=jlayton@kernel.org \
--cc=linux-nfs@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=neil@brown.name \
--cc=okorniev@redhat.com \
--cc=tom@talpey.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox