From: Chuck Lever <cel@kernel.org>
To: Zhu Yanjun <yanjun.zhu@linux.dev>, NeilBrown <neil@brown.name>,
Jeff Layton <jlayton@kernel.org>,
Olga Kornievskaia <okorniev@redhat.com>,
Dai Ngo <dai.ngo@oracle.com>, Tom Talpey <tom@talpey.com>,
Anna Schumaker <anna@kernel.org>
Cc: linux-nfs@vger.kernel.org, linux-rdma@vger.kernel.org,
Chuck Lever <chuck.lever@oracle.com>
Subject: Re: [PATCH v4 00/14] Allocate payload arrays dynamically
Date: Tue, 29 Apr 2025 09:41:39 -0400 [thread overview]
Message-ID: <dd92aff7-06b0-4eb9-8644-002563cc522b@kernel.org> (raw)
In-Reply-To: <25bb4881-f83b-41c7-8924-d760aa63405b@linux.dev>
On 4/29/25 9:06 AM, Zhu Yanjun wrote:
> On 28.04.25 21:36, cel@kernel.org wrote:
>> From: Chuck Lever <chuck.lever@oracle.com>
>>
>> In order to make RPCSVC_MAXPAYLOAD larger (or variable in size), we
>> need to do something clever with the payload arrays embedded in
>> struct svc_rqst and elsewhere.
>>
>> My preference is to keep these arrays allocated all the time because
>> allocating them on demand increases the risk of a memory allocation
>> failure during a large I/O. This is a quick-and-dirty approach that
>> might be replaced once NFSD is converted to use large folios.
>>
>> The downside of this design choice is that it pins a few pages per
>> NFSD thread (and that's the current situation already). But note
>> that because RPCSVC_MAXPAGES is 259, each array is just over a page
>> in size, making the allocation waste quite a bit of memory beyond
>> the end of the array due to power-of-2 allocator round up. This gets
>> worse as the MAXPAGES value is doubled or quadrupled.
>>
>> This series also addresses similar issues in the socket and RDMA
>> transports.
>>
>> v4 is "code complete", unless there are new code change requests.
>> I'm not convinced that adding XDR pad alignment to svc_reserve()
>> is good, but I'm willing to consider it further.
>>
>> It turns out there is already a tuneable for the maximum read and
>> write size in NFSD:
>>
>> /proc/fs/nfsd/max_block_size
>
> Hi,
>
> Based on the head commit ca91b9500108 Merge tag 'v6.15-rc4-ksmbd-server-
> fixes' of git://git.samba.org/ksmbd, I applied this patch series.
>
> When I built the kernel, the following error will pop out.
> "
> In file included from ./arch/x86/include/asm/bug.h:103,
> from ./include/linux/bug.h:5,
> from ./arch/x86/include/asm/paravirt.h:19,
> from ./arch/x86/include/asm/irqflags.h:102,
> from ./include/linux/irqflags.h:18,
> from ./include/linux/spinlock.h:59,
> from ./include/linux/fs_struct.h:6,
> from fs/nfsd/nfs4proc.c:35:
> fs/nfsd/nfs4proc.c: In function ‘nfsd4_write’:
> ./include/linux/array_size.h:11:38: warning: division ‘sizeof (struct
> kvec *) / sizeof (struct kvec)’ does not compute the number of array
> elements [-Wsizeof-pointer-div]
> 11 | #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]) +
> __must_be_array(arr))
> | ^
> ./include/asm-generic/bug.h:111:32: note: in definition of macro
> ‘WARN_ON_ONCE’
> 111 | int __ret_warn_on = !!(condition); \
> | ^~~~~~~~~
> fs/nfsd/nfs4proc.c:1231:30: note: in expansion of macro ‘ARRAY_SIZE’
> 1231 | WARN_ON_ONCE(nvecs > ARRAY_SIZE(rqstp->rq_vec));
> | ^~~~~~~~~~
> ./include/linux/compiler.h:197:62: error: static assertion failed: "must
> be array"
> 197 | #define __BUILD_BUG_ON_ZERO_MSG(e, msg) ((int)sizeof(struct
> {_Static_assert(!(e), msg);}))
> | ^~~~~~~~~~~~~~
> ./include/asm-generic/bug.h:111:32: note: in definition of macro
> ‘WARN_ON_ONCE’
> 111 | int __ret_warn_on = !!(condition); \
> | ^~~~~~~~~
> ./include/linux/compiler.h:202:33: note: in expansion of macro
> ‘__BUILD_BUG_ON_ZERO_MSG’
> 202 | #define __must_be_array(a) __BUILD_BUG_ON_ZERO_MSG(!
> __is_array(a), \
> | ^~~~~~~~~~~~~~~~~~~~~~~
> ./include/linux/array_size.h:11:59: note: in expansion of macro
> ‘__must_be_array’
> 11 | #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]) +
> __must_be_array(arr))
> | ^~~~~~~~~~~~~~~
> fs/nfsd/nfs4proc.c:1231:30: note: in expansion of macro ‘ARRAY_SIZE’
> 1231 | WARN_ON_ONCE(nvecs > ARRAY_SIZE(rqstp->rq_vec));
> | ^~~~~~~~~~
> make[4]: *** [scripts/Makefile.build:203: fs/nfsd/nfs4proc.o] Error 1
> make[4]: *** Waiting for unfinished jobs....
> make[3]: *** [scripts/Makefile.build:461: fs/nfsd] Error 2
> make[3]: *** Waiting for unfinished jobs....
> make[2]: *** [scripts/Makefile.build:461: fs] Error 2
> make[2]: *** Waiting for unfinished jobs....
> make[1]: *** [/home/zyanjun/Development/github-linux/Makefile:2011: .]
> Error 2
> make: *** [Makefile:248: __sub-make] Error 2
> "
The patches actually are to be applied to nfsd-testing, which has a
patch that removes the errant WARN_ON_ONCE.
https://git.kernel.org/pub/scm/linux/kernel/git/cel/linux.git/commit/?h=nfsd-testing&id=a356997303fbea4914bfbdad9645c61d88b28c4d
If you apply that one-liner first, then this series, it should compile
properly.
> The building host is as below:
>
> $ cat /etc/issue.net
> Ubuntu 22.04.5 LTS
>
> $ gcc --version
> gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0
> Copyright (C) 2021 Free Software Foundation, Inc.
> This is free software; see the source for copying conditions. There is NO
> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
>
> $ uname -a
> Linux lb03055 6.8.0-58-generic #60~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC
> Fri Mar 28 16:09:21 UTC 2 x86_64 x86_64 x86_64 GNU/Linux
>
>
> Zhu Yanjun
>
>>
>> Since there is an existing user space API for this, my initial
>> arguments against adding a tuneable are moot. max_block_size should
>> be adequate for this purpose, and enabling it to be set to larger
>> values should not impact the kernel-user space API in any way.
>>
>> Changes since v3:
>> * Improved the rdma_rw context count estimate
>> * Dropped "NFSD: Remove NFSSVC_MAXBLKSIZE from .pc_xdrressize"
>> * Cleaned up the max size macros a bit
>> * Completed the implementation of adjustable max_block_size
>>
>> Changes since v2:
>> * Address Jeff's review comments
>> * Address Neil's review comments
>> * Start removing a few uses of NFSSVC_MAXBLKSIZE
>>
>> Chuck Lever (14):
>> svcrdma: Reduce the number of rdma_rw contexts per-QP
>> sunrpc: Add a helper to derive maxpages from sv_max_mesg
>> sunrpc: Remove backchannel check in svc_init_buffer()
>> sunrpc: Replace the rq_pages array with dynamically-allocated memory
>> sunrpc: Replace the rq_vec array with dynamically-allocated memory
>> sunrpc: Replace the rq_bvec array with dynamically-allocated memory
>> sunrpc: Adjust size of socket's receive page array dynamically
>> svcrdma: Adjust the number of entries in svc_rdma_recv_ctxt::rc_pages
>> svcrdma: Adjust the number of entries in svc_rdma_send_ctxt::sc_pages
>> sunrpc: Remove the RPCSVC_MAXPAGES macro
>> NFSD: Remove NFSD_BUFSIZE
>> NFSD: Remove NFSSVC_MAXBLKSIZE_V2 macro
>> NFSD: Add a "default" block size
>> SUNRPC: Bump the maximum payload size for the server
>>
>> fs/nfsd/nfs4proc.c | 2 +-
>> fs/nfsd/nfs4state.c | 2 +-
>> fs/nfsd/nfs4xdr.c | 2 +-
>> fs/nfsd/nfsd.h | 24 ++++-------
>> fs/nfsd/nfsproc.c | 4 +-
>> fs/nfsd/nfssvc.c | 2 +-
>> fs/nfsd/nfsxdr.c | 4 +-
>> fs/nfsd/vfs.c | 2 +-
>> include/linux/sunrpc/svc.h | 45 +++++++++++++--------
>> include/linux/sunrpc/svc_rdma.h | 6 ++-
>> include/linux/sunrpc/svcsock.h | 4 +-
>> net/sunrpc/svc.c | 51 +++++++++++++++---------
>> net/sunrpc/svc_xprt.c | 10 +----
>> net/sunrpc/svcsock.c | 15 ++++---
>> net/sunrpc/xprtrdma/svc_rdma_recvfrom.c | 8 +++-
>> net/sunrpc/xprtrdma/svc_rdma_rw.c | 2 +-
>> net/sunrpc/xprtrdma/svc_rdma_sendto.c | 16 ++++++--
>> net/sunrpc/xprtrdma/svc_rdma_transport.c | 14 ++++---
>> 18 files changed, 122 insertions(+), 91 deletions(-)
>>
>
--
Chuck Lever
next prev parent reply other threads:[~2025-04-29 13:41 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-28 19:36 [PATCH v4 00/14] Allocate payload arrays dynamically cel
2025-04-28 19:36 ` [PATCH v4 01/14] svcrdma: Reduce the number of rdma_rw contexts per-QP cel
2025-05-06 13:08 ` Christoph Hellwig
2025-05-06 13:17 ` Jason Gunthorpe
2025-05-06 13:40 ` Christoph Hellwig
2025-05-06 13:55 ` Jason Gunthorpe
2025-05-06 14:13 ` Chuck Lever
2025-05-06 14:17 ` Jason Gunthorpe
2025-05-06 14:19 ` Chuck Lever
2025-05-06 14:22 ` Jason Gunthorpe
2025-05-08 8:41 ` Edward Srouji
2025-05-08 12:43 ` Jason Gunthorpe
2025-05-10 23:12 ` Edward Srouji
2025-04-28 19:36 ` [PATCH v4 02/14] sunrpc: Add a helper to derive maxpages from sv_max_mesg cel
2025-05-06 13:10 ` Christoph Hellwig
2025-04-28 19:36 ` [PATCH v4 03/14] sunrpc: Remove backchannel check in svc_init_buffer() cel
2025-05-06 13:11 ` Christoph Hellwig
2025-04-28 19:36 ` [PATCH v4 04/14] sunrpc: Replace the rq_pages array with dynamically-allocated memory cel
2025-04-30 4:53 ` NeilBrown
2025-04-28 19:36 ` [PATCH v4 05/14] sunrpc: Replace the rq_vec " cel
2025-05-06 13:29 ` Christoph Hellwig
2025-05-06 16:31 ` Chuck Lever
2025-05-07 7:34 ` Christoph Hellwig
2025-04-28 19:36 ` [PATCH v4 06/14] sunrpc: Replace the rq_bvec " cel
2025-04-28 19:36 ` [PATCH v4 07/14] sunrpc: Adjust size of socket's receive page array dynamically cel
2025-04-28 19:36 ` [PATCH v4 08/14] svcrdma: Adjust the number of entries in svc_rdma_recv_ctxt::rc_pages cel
2025-05-06 13:31 ` Christoph Hellwig
2025-05-06 15:20 ` Chuck Lever
2025-05-07 7:40 ` Christoph Hellwig
2025-04-28 19:36 ` [PATCH v4 09/14] svcrdma: Adjust the number of entries in svc_rdma_send_ctxt::sc_pages cel
2025-04-28 19:36 ` [PATCH v4 10/14] sunrpc: Remove the RPCSVC_MAXPAGES macro cel
2025-04-28 19:36 ` [PATCH v4 11/14] NFSD: Remove NFSD_BUFSIZE cel
2025-04-28 21:03 ` Jeff Layton
2025-05-06 13:32 ` Christoph Hellwig
2025-04-28 19:37 ` [PATCH v4 12/14] NFSD: Remove NFSSVC_MAXBLKSIZE_V2 macro cel
2025-05-06 13:33 ` Christoph Hellwig
2025-04-28 19:37 ` [PATCH v4 13/14] NFSD: Add a "default" block size cel
2025-04-28 21:07 ` Jeff Layton
2025-04-28 19:37 ` [PATCH v4 14/14] SUNRPC: Bump the maximum payload size for the server cel
2025-04-28 21:08 ` Jeff Layton
2025-04-29 15:44 ` Chuck Lever
2025-05-06 13:34 ` Christoph Hellwig
2025-05-06 13:52 ` Chuck Lever
2025-05-06 13:54 ` Jeff Layton
2025-05-06 13:59 ` Chuck Lever
2025-05-07 7:42 ` Christoph Hellwig
2025-05-07 14:25 ` Chuck Lever
2025-04-29 13:06 ` [PATCH v4 00/14] Allocate payload arrays dynamically Zhu Yanjun
2025-04-29 13:41 ` Chuck Lever [this message]
2025-04-29 13:52 ` Zhu Yanjun
2025-04-30 5:11 ` NeilBrown
2025-04-30 12:45 ` Chuck Lever
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=dd92aff7-06b0-4eb9-8644-002563cc522b@kernel.org \
--to=cel@kernel.org \
--cc=anna@kernel.org \
--cc=chuck.lever@oracle.com \
--cc=dai.ngo@oracle.com \
--cc=jlayton@kernel.org \
--cc=linux-nfs@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=neil@brown.name \
--cc=okorniev@redhat.com \
--cc=tom@talpey.com \
--cc=yanjun.zhu@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox