Linux NILFS development
 help / color / mirror / Atom feed
From: Li Hong <lihong.hi-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: KONISHI Ryusuke
	<konishi.ryusuke-Zyj7fXuS5i5L9jVzuh4AOg@public.gmane.org>
Cc: linux-nilfs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH 3/3] nilfs2: change sc_timer from a pointer to an embedded one in struct nilfs_sc_info
Date: Sun, 11 Apr 2010 00:17:52 +0800	[thread overview]
Message-ID: <20100410161752.GC9213@xhl> (raw)
In-Reply-To: <20100410161700.GB9213@xhl>

In nilfs_segctor_thread(), timer is a local variable allocated on stack. Its
address can't be set to sci->sc_timer and passed in several procedures.

It works now by chance, just because other procedures are called by
nilfs_segctor_thread() directly or indirectly and the stack hasn't been
deallocated yet.

Signed-off-by: Li Hong <lihong.hi-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 fs/nilfs2/segment.c |   31 +++++++++++++------------------
 fs/nilfs2/segment.h |    2 +-
 2 files changed, 14 insertions(+), 19 deletions(-)

diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c
index dd3c4d5..310979a 100644
--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -2158,9 +2158,9 @@ static int nilfs_segctor_do_construct(struct nilfs_sc_info *sci, int mode)
 static void nilfs_segctor_start_timer(struct nilfs_sc_info *sci)
 {
 	spin_lock(&sci->sc_state_lock);
-	if (sci->sc_timer && !(sci->sc_state & NILFS_SEGCTOR_COMMIT)) {
-		sci->sc_timer->expires = jiffies + sci->sc_interval;
-		add_timer(sci->sc_timer);
+	if (!(sci->sc_state & NILFS_SEGCTOR_COMMIT)) {
+		sci->sc_timer.expires = jiffies + sci->sc_interval;
+		add_timer(&sci->sc_timer);
 		sci->sc_state |= NILFS_SEGCTOR_COMMIT;
 	}
 	spin_unlock(&sci->sc_state_lock);
@@ -2365,9 +2365,7 @@ static void nilfs_segctor_accept(struct nilfs_sc_info *sci)
 	spin_lock(&sci->sc_state_lock);
 	sci->sc_seq_accepted = sci->sc_seq_request;
 	spin_unlock(&sci->sc_state_lock);
-
-	if (sci->sc_timer)
-		del_timer_sync(sci->sc_timer);
+	del_timer_sync(&sci->sc_timer);
 }
 
 /**
@@ -2393,9 +2391,9 @@ static void nilfs_segctor_notify(struct nilfs_sc_info *sci, int mode, int err)
 			sci->sc_flush_request &= ~FLUSH_DAT_BIT;
 
 		/* re-enable timer if checkpoint creation was not done */
-		if (sci->sc_timer && (sci->sc_state & NILFS_SEGCTOR_COMMIT) &&
-		    time_before(jiffies, sci->sc_timer->expires))
-			add_timer(sci->sc_timer);
+		if ((sci->sc_state & NILFS_SEGCTOR_COMMIT) &&
+		    time_before(jiffies, sci->sc_timer.expires))
+			add_timer(&sci->sc_timer);
 	}
 	spin_unlock(&sci->sc_state_lock);
 }
@@ -2574,13 +2572,10 @@ static int nilfs_segctor_thread(void *arg)
 {
 	struct nilfs_sc_info *sci = (struct nilfs_sc_info *)arg;
 	struct the_nilfs *nilfs = sci->sc_sbi->s_nilfs;
-	struct timer_list timer;
 	int timeout = 0;
 
-	init_timer(&timer);
-	timer.data = (unsigned long)current;
-	timer.function = nilfs_construction_timeout;
-	sci->sc_timer = &timer;
+	sci->sc_timer.data = (unsigned long)current;
+	sci->sc_timer.function = nilfs_construction_timeout;
 
 	/* start sync. */
 	sci->sc_task = current;
@@ -2629,7 +2624,7 @@ static int nilfs_segctor_thread(void *arg)
 			should_sleep = 0;
 		else if (sci->sc_state & NILFS_SEGCTOR_COMMIT)
 			should_sleep = time_before(jiffies,
-						   sci->sc_timer->expires);
+					sci->sc_timer.expires);
 
 		if (should_sleep) {
 			spin_unlock(&sci->sc_state_lock);
@@ -2638,7 +2633,7 @@ static int nilfs_segctor_thread(void *arg)
 		}
 		finish_wait(&sci->sc_wait_daemon, &wait);
 		timeout = ((sci->sc_state & NILFS_SEGCTOR_COMMIT) &&
-			   time_after_eq(jiffies, sci->sc_timer->expires));
+			   time_after_eq(jiffies, sci->sc_timer.expires));
 
 		if (nilfs_sb_dirty(nilfs) && nilfs_sb_need_update(nilfs))
 			set_nilfs_discontinued(nilfs);
@@ -2647,8 +2642,7 @@ static int nilfs_segctor_thread(void *arg)
 
  end_thread:
 	spin_unlock(&sci->sc_state_lock);
-	del_timer_sync(sci->sc_timer);
-	sci->sc_timer = NULL;
+	del_timer_sync(&sci->sc_timer);
 
 	/* end sync. */
 	sci->sc_task = NULL;
@@ -2707,6 +2701,7 @@ static struct nilfs_sc_info *nilfs_segctor_new(struct nilfs_sb_info *sbi)
 	INIT_LIST_HEAD(&sci->sc_write_logs);
 	INIT_LIST_HEAD(&sci->sc_gc_inodes);
 	INIT_LIST_HEAD(&sci->sc_copied_buffers);
+	init_timer(&sci->sc_timer);
 
 	sci->sc_interval = HZ * NILFS_SC_DEFAULT_TIMEOUT;
 	sci->sc_mjcp_freq = HZ * NILFS_SC_DEFAULT_SR_FREQ;
diff --git a/fs/nilfs2/segment.h b/fs/nilfs2/segment.h
index 7aca765..dca1423 100644
--- a/fs/nilfs2/segment.h
+++ b/fs/nilfs2/segment.h
@@ -177,7 +177,7 @@ struct nilfs_sc_info {
 	unsigned long		sc_lseg_stime;	/* in 1/HZ seconds */
 	unsigned long		sc_watermark;
 
-	struct timer_list      *sc_timer;
+	struct timer_list	sc_timer;
 	struct task_struct     *sc_task;
 };
 
-- 
1.6.3.3

--
To unsubscribe from this list: send the line "unsubscribe linux-nilfs" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2010-04-10 16:17 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-04-10 16:15 [PATCH 1/3] nilfs2: remove nilfs_segctor_init() in segment.c Li Hong
2010-04-10 16:17 ` [PATCH 2/3] nilfs2: nilfs_segctor_destroy() should do a full job Li Hong
2010-04-10 16:17   ` Li Hong [this message]
2010-04-11  2:40     ` [PATCH 3/3] nilfs2: change sc_timer from a pointer to an embedded one in struct nilfs_sc_info Ryusuke Konishi
     [not found]       ` <20100411.114022.199103512.ryusuke-sG5X7nlA6pw@public.gmane.org>
2010-04-11  4:29         ` Li Hong
2010-04-11  9:08           ` Li Hong
2010-04-11  9:47             ` Ryusuke Konishi
2010-04-10 18:10   ` [PATCH 2/3] nilfs2: nilfs_segctor_destroy() should do a full job Ryusuke Konishi
     [not found]     ` <20100411.031005.204131803.ryusuke-sG5X7nlA6pw@public.gmane.org>
2010-04-11  4:27       ` Li Hong
2010-04-11  8:15         ` Ryusuke Konishi
     [not found]           ` <20100411.171551.04175650.ryusuke-sG5X7nlA6pw@public.gmane.org>
2010-04-11  8:29             ` Li Hong
2010-04-10 17:57 ` [PATCH 1/3] nilfs2: remove nilfs_segctor_init() in segment.c Ryusuke Konishi
     [not found]   ` <20100411.025715.33555818.ryusuke-sG5X7nlA6pw@public.gmane.org>
2010-04-11  4:17     ` Li Hong
2010-04-11  7:58       ` Ryusuke Konishi
     [not found]         ` <20100411.165847.77342547.ryusuke-sG5X7nlA6pw@public.gmane.org>
2010-04-11  8:22           ` Li Hong
2010-04-11  8:40             ` Ryusuke Konishi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100410161752.GC9213@xhl \
    --to=lihong.hi-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=konishi.ryusuke-Zyj7fXuS5i5L9jVzuh4AOg@public.gmane.org \
    --cc=linux-nilfs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox