Linux NILFS development
 help / color / mirror / Atom feed
From: Li Hong <lihong.hi-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Ryusuke Konishi <ryusuke-sG5X7nlA6pw@public.gmane.org>
Cc: konishi.ryusuke-Zyj7fXuS5i5L9jVzuh4AOg@public.gmane.org,
	linux-nilfs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 1/3] nilfs2: remove nilfs_segctor_init() in segment.c
Date: Sun, 11 Apr 2010 12:17:26 +0800	[thread overview]
Message-ID: <20100411041726.GA10086@xhl> (raw)
In-Reply-To: <20100411.025715.33555818.ryusuke-sG5X7nlA6pw@public.gmane.org>

On Sun, Apr 11, 2010 at 02:57:15AM +0900, Ryusuke Konishi wrote:
> Hi,
> On Sun, 11 Apr 2010 00:15:43 +0800, Li Hong <lihong.hi-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> > Hi KONISHI Ryusuke,
> > 
> > Three new patches based on nilfs2/for-next branch. New code has been built and
> > loaded successfully, and also passed a light-weight reads and writes test.
> > 
> > Thanks,
> > Li Hong
> 
> Ok, I'll look into each of them.
> 
> > ---------------------------- cut here --------------------------
> > 
> > From 2c622d0f59782321204bf1fde7eea4a593cc6b65 Mon Sep 17 00:00:00 2001
> > From: Li Hong <lihong.hi-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > Date: Sat, 10 Apr 2010 21:57:11 +0800
> > Subject: [PATCH 1/3] nilfs2: remove nilfs_segctor_init() in segment.c
> > 
> > There are only two lines of code in nilfs_segctor_init(). From a logic design
> > view, the first line 'sci->sc_seq_done = sci->sc_seq_request;' should be put in
> > nilfs_segctor_new(). Even in nilfs_segctor_new(), this initialization is
> > needless because sci is kzalloc-ed. So nilfs_segctor_init() is only a wrap call
> > to nilfs_segctor_start_thread(). This removes an indirect call overhead.
> > 
> > Signed-off-by: Li Hong <lihong.hi-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> 
> Looks no problem.
> 
> The reason why nilfs_segctor_init is present in that manner is
> historical (just for your information. You don't have to mention this
> reason).
> 
> I think you don't have to mention the indirect call overhead because
> it's only triggered in the level of mount/unmount/remount and gcc will
> inline it in the caller.
^^^^^^^^^^^^^^^^^^^^^^^^^
No, there is no inline key word in nilfs_segctor_init(). Unless you mean gcc
will try to inline small procedures if possible.

Thanks,
Li Hong

> Thanks,
> Ryusuke Konishi
> 
> > ---
> >  fs/nilfs2/segment.c |    9 +--------
> >  1 files changed, 1 insertions(+), 8 deletions(-)
> > 
> > diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c
> > index f235fc0..514620d 100644
> > --- a/fs/nilfs2/segment.c
> > +++ b/fs/nilfs2/segment.c
> > @@ -2684,13 +2684,6 @@ static void nilfs_segctor_kill_thread(struct nilfs_sc_info *sci)
> >  	}
> >  }
> >  
> > -static int nilfs_segctor_init(struct nilfs_sc_info *sci)
> > -{
> > -	sci->sc_seq_done = sci->sc_seq_request;
> > -
> > -	return nilfs_segctor_start_thread(sci);
> > -}
> > -
> >  /*
> >   * Setup & clean-up functions
> >   */
> > @@ -2814,7 +2807,7 @@ int nilfs_attach_segment_constructor(struct nilfs_sb_info *sbi)
> >  		return -ENOMEM;
> >  
> >  	nilfs_attach_writer(nilfs, sbi);
> > -	err = nilfs_segctor_init(NILFS_SC(sbi));
> > +	err = nilfs_segctor_start_thread(NILFS_SC(sbi));
> >  	if (err) {
> >  		nilfs_detach_writer(nilfs, sbi);
> >  		kfree(sbi->s_sc_info);
> > -- 
> > 1.6.3.3
> > 
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-nilfs" in
> > the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-nilfs" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2010-04-11  4:17 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-04-10 16:15 [PATCH 1/3] nilfs2: remove nilfs_segctor_init() in segment.c Li Hong
2010-04-10 16:17 ` [PATCH 2/3] nilfs2: nilfs_segctor_destroy() should do a full job Li Hong
2010-04-10 16:17   ` [PATCH 3/3] nilfs2: change sc_timer from a pointer to an embedded one in struct nilfs_sc_info Li Hong
2010-04-11  2:40     ` Ryusuke Konishi
     [not found]       ` <20100411.114022.199103512.ryusuke-sG5X7nlA6pw@public.gmane.org>
2010-04-11  4:29         ` Li Hong
2010-04-11  9:08           ` Li Hong
2010-04-11  9:47             ` Ryusuke Konishi
2010-04-10 18:10   ` [PATCH 2/3] nilfs2: nilfs_segctor_destroy() should do a full job Ryusuke Konishi
     [not found]     ` <20100411.031005.204131803.ryusuke-sG5X7nlA6pw@public.gmane.org>
2010-04-11  4:27       ` Li Hong
2010-04-11  8:15         ` Ryusuke Konishi
     [not found]           ` <20100411.171551.04175650.ryusuke-sG5X7nlA6pw@public.gmane.org>
2010-04-11  8:29             ` Li Hong
2010-04-10 17:57 ` [PATCH 1/3] nilfs2: remove nilfs_segctor_init() in segment.c Ryusuke Konishi
     [not found]   ` <20100411.025715.33555818.ryusuke-sG5X7nlA6pw@public.gmane.org>
2010-04-11  4:17     ` Li Hong [this message]
2010-04-11  7:58       ` Ryusuke Konishi
     [not found]         ` <20100411.165847.77342547.ryusuke-sG5X7nlA6pw@public.gmane.org>
2010-04-11  8:22           ` Li Hong
2010-04-11  8:40             ` Ryusuke Konishi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100411041726.GA10086@xhl \
    --to=lihong.hi-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=konishi.ryusuke-Zyj7fXuS5i5L9jVzuh4AOg@public.gmane.org \
    --cc=linux-nilfs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=ryusuke-sG5X7nlA6pw@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox