Linux-NVME Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: keith.busch@intel.com (Keith Busch)
Subject: [PATCH] NVMe: Skip namespaces with interleaved meta-data
Date: Wed, 28 Jan 2015 21:16:34 +0000 (UTC)	[thread overview]
Message-ID: <alpine.LNX.2.00.1501282102210.15481@localhost.lm.intel.com> (raw)
In-Reply-To: <54C94B90.20805@ranbarg.com>

On Wed, 28 Jan 2015, Paul Grabinar wrote:
> On 28/01/15 15:11, Keith Busch wrote:
>> Thanks for the info. NVMe doesn't appear to allow disabling metadata
>> per-io except for a subset of formats. If that's correct, this driver
>> would have to provide a valid protection buffer for all IO. Checking
>> with committee comrades for clarification.
>>
>
> It is indeed a shame that they didn't define a null meta-data pointer as
> meaning there is no meta-data. Maybe 1.3?
>
> I got around this as follows.
>
> Limit the maximum transfer so that all the meta-data fits into a single
> page. As a side note, the protection information from the kernel needs
> to be set to a maximum of one page anyway, as there is only a single PRP
> entry for the meta-data and I don't think PRP lists are allowed here.

Correct, meta-data requires a single physically contiguous buffer,
so no prp lists here. It doesn't necessarilly need to be in a single
page, though. We can have the block layer split things accordingly if
we register with this:

 	blk_queue_max_integrity_segments(ns->queue, 1);

This way no command will be recieved requiring two metadata buffers.

I was trying something similar to SCSI, and I think Christoph may
approve. Instead of all the logic deciding which namespace to attach
and which to bail, attach all namespaces from NSID 1 to the max, then:

 	set_capacity(ns->disk, 0);

Wait to initialize the format in nvme_revalidate_disk. If it's a usable
format, set capacity and sector accordingly, and leave capacity at 0 if
not. For metadata formats, leave the capacity at 0 until block integrity
extensions can be registered, then rescan.

> Allocate two 1 page DMA buffers per device, one will be used for reads
> and one for writes.
> Fill the write buffer with 0xFF, which means no protection information
> is available.
> When a read occurs and there is no kernel supplied protection
> information, set the meta-data pointer to the read buffer.
> When a write occurs and there is no kernel supplied protection
> information, set the meta-data pointer to the write buffer. This will
> write all the meta-data as 0xFF.

  reply	other threads:[~2015-01-28 21:16 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-27 18:07 [PATCH] NVMe: Skip namespaces with interleaved meta-data Keith Busch
2015-01-27 21:57 ` David Darrington
2015-01-27 22:09   ` Keith Busch
2015-01-28  1:21     ` Keith Busch
2015-01-28  1:39       ` Martin K. Petersen
2015-01-28 15:11         ` Keith Busch
2015-01-28 20:50           ` Paul Grabinar
2015-01-28 21:16             ` Keith Busch [this message]
2015-01-28 21:46               ` Paul Grabinar
2015-01-28 22:08                 ` Martin K. Petersen
2015-01-28 22:17                   ` Keith Busch
2015-01-28 22:28                     ` Martin K. Petersen
2015-01-29  0:09                       ` Keith Busch
2015-01-29  0:57                         ` Martin K. Petersen
2015-01-29 15:44                           ` Keith Busch
2015-01-30  0:41                             ` Martin K. Petersen
2015-01-30  0:57                               ` Keith Busch
2015-01-28 22:17           ` Andrey Kuzmin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.LNX.2.00.1501282102210.15481@localhost.lm.intel.com \
    --to=keith.busch@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox