From: Venkatraman S <svenkatr@ti.com>
To: linux-mmc@vger.kernel.org, linux-omap@vger.kernel.org
Cc: cjb@laptop.org, balajitk@ti.com, vishp@ti.com,
Venkatraman S <svenkatr@ti.com>
Subject: [PATCH 08/10] mmc: omap_hsmmc: consolidate error report handling of HSMMC IRQ
Date: Sat, 18 Aug 2012 00:22:28 +0530 [thread overview]
Message-ID: <1345229550-8672-9-git-send-email-svenkatr@ti.com> (raw)
In-Reply-To: <1345229550-8672-1-git-send-email-svenkatr@ti.com>
Consolidate the duplicated code around the handling of CMD_TIMEOUT,
CMD_CRC, DATA_TIMEOUT, DATA_CRC and CARD_ERR handling into a
single function.
This generally shrinks code bloat, but is also required for implementing
software based guard timers.
Signed-off-by: Venkatraman S <svenkatr@ti.com>
---
drivers/mmc/host/omap_hsmmc.c | 63 +++++++++++++++----------------------------
1 file changed, 21 insertions(+), 42 deletions(-)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 20453c8..9afdd20 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -964,6 +964,18 @@ static inline void omap_hsmmc_reset_controller_fsm(struct omap_hsmmc_host *host,
__func__);
}
+static void hsmmc_command_incomplete(struct omap_hsmmc_host *host, int err)
+{
+ omap_hsmmc_reset_controller_fsm(host, SRC);
+ host->cmd->error = err;
+
+ if (host->data) {
+ omap_hsmmc_reset_controller_fsm(host, SRD);
+ omap_hsmmc_dma_cleanup(host, err);
+ }
+
+}
+
static void omap_hsmmc_do_irq(struct omap_hsmmc_host *host, int status)
{
struct mmc_data *data;
@@ -974,48 +986,15 @@ static void omap_hsmmc_do_irq(struct omap_hsmmc_host *host, int status)
if (status & ERR) {
omap_hsmmc_dbg_report_irq(host, status);
- if ((status & CMD_TIMEOUT) ||
- (status & CMD_CRC)) {
- if (host->cmd) {
- if (status & CMD_TIMEOUT) {
- omap_hsmmc_reset_controller_fsm(host,
- SRC);
- host->cmd->error = -ETIMEDOUT;
- } else {
- host->cmd->error = -EILSEQ;
- }
- end_cmd = 1;
- }
- if (host->data || host->response_busy) {
- if (host->data)
- omap_hsmmc_dma_cleanup(host,
- -ETIMEDOUT);
- host->response_busy = 0;
- omap_hsmmc_reset_controller_fsm(host, SRD);
- }
- }
- if ((status & DATA_TIMEOUT) ||
- (status & DATA_CRC)) {
- if (host->data || host->response_busy) {
- int err = (status & DATA_TIMEOUT) ?
- -ETIMEDOUT : -EILSEQ;
-
- if (host->data)
- omap_hsmmc_dma_cleanup(host, err);
- else
- host->mrq->cmd->error = err;
- host->response_busy = 0;
- omap_hsmmc_reset_controller_fsm(host, SRD);
- end_trans = 1;
- }
- }
- if (status & CARD_ERR) {
- dev_dbg(mmc_dev(host->mmc),
- "Ignoring card err CMD%d\n", host->cmd->opcode);
- if (host->cmd)
- end_cmd = 1;
- if (host->data)
- end_trans = 1;
+ if (status & (CMD_TIMEOUT | DATA_TIMEOUT))
+ hsmmc_command_incomplete(host, -ETIMEDOUT);
+ else if (status & (CMD_CRC | DATA_CRC))
+ hsmmc_command_incomplete(host, -EILSEQ);
+
+ end_cmd = 1;
+ if (host->data || host->response_busy) {
+ end_trans = 1;
+ host->response_busy = 0;
}
}
--
1.7.11.1.25.g0e18bef
next prev parent reply other threads:[~2012-08-17 18:52 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-17 18:52 [PATCH 00/10] Assorted MMC / OMAP HSMMC patches Venkatraman S
2012-08-17 18:52 ` [PATCH 01/10] mmc: core: Add TRANsfer state to non-HPI state Venkatraman S
2012-08-17 18:52 ` [PATCH 02/10] mmc: debugfs: Print ext_csd in ascending order Venkatraman S
2012-08-17 18:52 ` [PATCH 03/10] mmc: omap: remove unused variables and includes Venkatraman S
2012-08-17 18:52 ` [PATCH 04/10] mmc: omap: fix mmc_omap_report_irq to use dev_dbg macros Venkatraman S
2012-08-17 18:52 ` [PATCH 05/10] mmc: omap_hsmmc: remove unused vars and includes Venkatraman S
2012-08-17 18:52 ` [PATCH 06/10] mmc: omap_hsmmc: remove access to SYSCONFIG register Venkatraman S
2012-08-21 15:38 ` Shubhrajyoti Datta
2012-08-27 11:04 ` S, Venkatraman
2012-08-17 18:52 ` [PATCH 07/10] mmc: omap_hsmmc: consolidate flush posted writes for HSMMC IRQs Venkatraman S
2012-08-21 15:21 ` T Krishnamoorthy, Balaji
2012-08-27 11:02 ` S, Venkatraman
2012-08-17 18:52 ` Venkatraman S [this message]
2012-08-17 18:52 ` [PATCH 09/10] mmc: omap_hsmmc: convert from IP timer to hrtimer Venkatraman S
2012-08-21 10:42 ` Felipe Balbi
2012-08-22 10:38 ` S, Venkatraman
2012-08-22 11:28 ` Felipe Balbi
2012-08-17 18:52 ` [PATCH 10/10] mmc: omap_hsmmc: Move to Maintained state in MAINTAINERS Venkatraman S
2012-08-21 10:43 ` [PATCH 00/10] Assorted MMC / OMAP HSMMC patches Felipe Balbi
2012-08-27 23:02 ` Chris Ball
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1345229550-8672-9-git-send-email-svenkatr@ti.com \
--to=svenkatr@ti.com \
--cc=balajitk@ti.com \
--cc=cjb@laptop.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=vishp@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox