From: Jon Hunter <jon-hunter@ti.com>
To: Tony Lindgren <tony@atomide.com>, Benoit Cousson <b-cousson@ti.com>
Cc: device-tree <devicetree-discuss@lists.ozlabs.org>,
linux-omap <linux-omap@vger.kernel.org>,
linux-arm <linux-arm-kernel@lists.infradead.org>,
Jon Hunter <jon-hunter@ti.com>
Subject: [PATCH 9/9] ARM: dts: OMAP3: Add reg and interrupt properties for gpio
Date: Fri, 8 Mar 2013 11:27:33 -0600 [thread overview]
Message-ID: <1362763654-9660-10-git-send-email-jon-hunter@ti.com> (raw)
In-Reply-To: <1362763654-9660-1-git-send-email-jon-hunter@ti.com>
The OMAP3 gpio bindings are currently missing the reg and interrupt
properties and so add these properties.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
arch/arm/boot/dts/omap3.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index c9bedf7..f4651af 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -113,6 +113,8 @@
gpio1: gpio@48310000 {
compatible = "ti,omap3-gpio";
+ reg = <0x48310000 0x200>;
+ interrupts = <29>;
ti,hwmods = "gpio1";
gpio-controller;
#gpio-cells = <2>;
@@ -122,6 +124,8 @@
gpio2: gpio@49050000 {
compatible = "ti,omap3-gpio";
+ reg = <0x49050000 0x200>;
+ interrupts = <30>;
ti,hwmods = "gpio2";
gpio-controller;
#gpio-cells = <2>;
@@ -131,6 +135,8 @@
gpio3: gpio@49052000 {
compatible = "ti,omap3-gpio";
+ reg = <0x49052000 0x200>;
+ interrupts = <31>;
ti,hwmods = "gpio3";
gpio-controller;
#gpio-cells = <2>;
@@ -140,6 +146,8 @@
gpio4: gpio@49054000 {
compatible = "ti,omap3-gpio";
+ reg = <0x49054000 0x200>;
+ interrupts = <32>;
ti,hwmods = "gpio4";
gpio-controller;
#gpio-cells = <2>;
@@ -149,6 +157,8 @@
gpio5: gpio@49056000 {
compatible = "ti,omap3-gpio";
+ reg = <0x49056000 0x200>;
+ interrupts = <33>;
ti,hwmods = "gpio5";
gpio-controller;
#gpio-cells = <2>;
@@ -158,6 +168,8 @@
gpio6: gpio@49058000 {
compatible = "ti,omap3-gpio";
+ reg = <0x49058000 0x200>;
+ interrupts = <34>;
ti,hwmods = "gpio6";
gpio-controller;
#gpio-cells = <2>;
--
1.7.10.4
next prev parent reply other threads:[~2013-03-08 17:28 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-08 17:27 [PATCH 0/9] ARM: dts: Various OMAP2+ device-tree updates Jon Hunter
2013-03-08 17:27 ` [PATCH 1/9] ARM: OMAP2+: Prepare for device-tree PMU support Jon Hunter
2013-03-08 17:27 ` [PATCH 2/9] ARM: dts: OMAP2+: Add PMU nodes Jon Hunter
2013-03-08 17:27 ` [PATCH 3/9] ARM: dts: OMAP2+: Add SDMA controller bindings and nodes Jon Hunter
2013-03-08 17:27 ` [PATCH 4/9] ARM: dts: OMAP3: Add support for OMAP3430 SDP board Jon Hunter
2013-03-09 2:25 ` Anil Kumar
2013-03-11 17:53 ` Jon Hunter
2013-03-12 2:42 ` Kumar, Anil
2013-03-12 8:50 ` Javier Martinez Canillas
2013-03-13 2:50 ` Kumar, Anil
2013-03-12 21:27 ` Jon Hunter
2013-03-13 2:59 ` Kumar, Anil
2013-03-11 2:45 ` Anil Kumar
2013-03-11 17:54 ` Jon Hunter
2013-03-08 17:27 ` [PATCH 5/9] ARM: dts: Add GPMC node for OMAP2, OMAP4 and OMAP5 Jon Hunter
2013-03-08 20:25 ` Javier Martinez Canillas
2013-03-08 21:41 ` Jon Hunter
2013-03-09 1:25 ` Javier Martinez Canillas
2013-03-09 12:42 ` Ezequiel Garcia
2013-03-11 17:56 ` Jon Hunter
2013-03-14 15:45 ` Benoit Cousson
2013-03-14 15:50 ` Jon Hunter
2013-03-14 15:57 ` Ezequiel Garcia
2013-03-14 15:58 ` Benoit Cousson
2013-03-14 16:00 ` Jon Hunter
2013-03-14 16:03 ` Benoit Cousson
2013-03-08 17:27 ` [PATCH 6/9] ARM: dts: Add OMAP3430 SDP flash memory bindings Jon Hunter
2013-03-08 17:27 ` [PATCH 7/9] ARM: dts: Add OMAP2 gpio bindings Jon Hunter
2013-03-08 17:27 ` [PATCH 8/9] ARM: dts: OMAP3+: Correct gpio #interrupts-cells property Jon Hunter
2013-03-08 17:27 ` Jon Hunter [this message]
2013-03-14 14:57 ` [PATCH 0/9] ARM: dts: Various OMAP2+ device-tree updates Benoit Cousson
2013-03-14 15:45 ` Florian Vaussard
2013-03-14 15:59 ` Jon Hunter
2013-03-14 16:06 ` Benoit Cousson
2013-03-14 16:02 ` Javier Martinez Canillas
2013-03-14 16:04 ` Jon Hunter
2013-03-14 16:08 ` Benoit Cousson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1362763654-9660-10-git-send-email-jon-hunter@ti.com \
--to=jon-hunter@ti.com \
--cc=b-cousson@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox