From: Jon Hunter <jon-hunter@ti.com>
To: Tony Lindgren <tony@atomide.com>, Benoit Cousson <b-cousson@ti.com>
Cc: device-tree <devicetree-discuss@lists.ozlabs.org>,
linux-omap <linux-omap@vger.kernel.org>,
linux-arm <linux-arm-kernel@lists.infradead.org>,
Jon Hunter <jon-hunter@ti.com>
Subject: [PATCH 7/9] ARM: dts: Add OMAP2 gpio bindings
Date: Fri, 8 Mar 2013 11:27:31 -0600 [thread overview]
Message-ID: <1362763654-9660-8-git-send-email-jon-hunter@ti.com> (raw)
In-Reply-To: <1362763654-9660-1-git-send-email-jon-hunter@ti.com>
Add gpios bindings for OMAP2420 and OMAP2430 devices.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
arch/arm/boot/dts/omap2420.dtsi | 44 +++++++++++++++++++++++++++++++
arch/arm/boot/dts/omap2430.dtsi | 55 +++++++++++++++++++++++++++++++++++++++
2 files changed, 99 insertions(+)
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
index d4ce6c2..eee902f 100644
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -29,6 +29,50 @@
pinctrl-single,function-mask = <0x3f>;
};
+ gpio1: gpio@48018000 {
+ compatible = "ti,omap2-gpio";
+ reg = <0x48018000 0x200>;
+ interrupts = <29>;
+ ti,hwmods = "gpio1";
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio2: gpio@4801a000 {
+ compatible = "ti,omap2-gpio";
+ reg = <0x4801a000 0x200>;
+ interrupts = <30>;
+ ti,hwmods = "gpio2";
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio3: gpio@4801c000 {
+ compatible = "ti,omap2-gpio";
+ reg = <0x4801c000 0x200>;
+ interrupts = <31>;
+ ti,hwmods = "gpio3";
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio4: gpio@4801e000 {
+ compatible = "ti,omap2-gpio";
+ reg = <0x4801e000 0x200>;
+ interrupts = <32>;
+ ti,hwmods = "gpio4";
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
gpmc: gpmc@6800a000 {
compatible = "ti,omap2420-gpmc";
reg = <0x6800a000 0x1000>;
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index 832f184..fb74382 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -29,6 +29,61 @@
pinctrl-single,function-mask = <0x3f>;
};
+ gpio1: gpio@4900c000 {
+ compatible = "ti,omap2-gpio";
+ reg = <0x4900c000 0x200>;
+ interrupts = <29>;
+ ti,hwmods = "gpio1";
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio2: gpio@4900e000 {
+ compatible = "ti,omap2-gpio";
+ reg = <0x4900e000 0x200>;
+ interrupts = <30>;
+ ti,hwmods = "gpio2";
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio3: gpio@49010000 {
+ compatible = "ti,omap2-gpio";
+ reg = <0x49010000 0x200>;
+ interrupts = <31>;
+ ti,hwmods = "gpio3";
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio4: gpio@49012000 {
+ compatible = "ti,omap2-gpio";
+ reg = <0x49012000 0x200>;
+ interrupts = <32>;
+ ti,hwmods = "gpio4";
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio5: gpio@480b6000 {
+ compatible = "ti,omap2-gpio";
+ reg = <0x480b6000 0x200>;
+ interrupts = <33>;
+ ti,hwmods = "gpio5";
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
gpmc: gpmc@6e000000 {
compatible = "ti,omap2430-gpmc";
reg = <0x6e000000 0x1000>;
--
1.7.10.4
next prev parent reply other threads:[~2013-03-08 17:28 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-08 17:27 [PATCH 0/9] ARM: dts: Various OMAP2+ device-tree updates Jon Hunter
2013-03-08 17:27 ` [PATCH 1/9] ARM: OMAP2+: Prepare for device-tree PMU support Jon Hunter
2013-03-08 17:27 ` [PATCH 2/9] ARM: dts: OMAP2+: Add PMU nodes Jon Hunter
2013-03-08 17:27 ` [PATCH 3/9] ARM: dts: OMAP2+: Add SDMA controller bindings and nodes Jon Hunter
2013-03-08 17:27 ` [PATCH 4/9] ARM: dts: OMAP3: Add support for OMAP3430 SDP board Jon Hunter
2013-03-09 2:25 ` Anil Kumar
2013-03-11 17:53 ` Jon Hunter
2013-03-12 2:42 ` Kumar, Anil
2013-03-12 8:50 ` Javier Martinez Canillas
2013-03-13 2:50 ` Kumar, Anil
2013-03-12 21:27 ` Jon Hunter
2013-03-13 2:59 ` Kumar, Anil
2013-03-11 2:45 ` Anil Kumar
2013-03-11 17:54 ` Jon Hunter
2013-03-08 17:27 ` [PATCH 5/9] ARM: dts: Add GPMC node for OMAP2, OMAP4 and OMAP5 Jon Hunter
2013-03-08 20:25 ` Javier Martinez Canillas
2013-03-08 21:41 ` Jon Hunter
2013-03-09 1:25 ` Javier Martinez Canillas
2013-03-09 12:42 ` Ezequiel Garcia
2013-03-11 17:56 ` Jon Hunter
2013-03-14 15:45 ` Benoit Cousson
2013-03-14 15:50 ` Jon Hunter
2013-03-14 15:57 ` Ezequiel Garcia
2013-03-14 15:58 ` Benoit Cousson
2013-03-14 16:00 ` Jon Hunter
2013-03-14 16:03 ` Benoit Cousson
2013-03-08 17:27 ` [PATCH 6/9] ARM: dts: Add OMAP3430 SDP flash memory bindings Jon Hunter
2013-03-08 17:27 ` Jon Hunter [this message]
2013-03-08 17:27 ` [PATCH 8/9] ARM: dts: OMAP3+: Correct gpio #interrupts-cells property Jon Hunter
2013-03-08 17:27 ` [PATCH 9/9] ARM: dts: OMAP3: Add reg and interrupt properties for gpio Jon Hunter
2013-03-14 14:57 ` [PATCH 0/9] ARM: dts: Various OMAP2+ device-tree updates Benoit Cousson
2013-03-14 15:45 ` Florian Vaussard
2013-03-14 15:59 ` Jon Hunter
2013-03-14 16:06 ` Benoit Cousson
2013-03-14 16:02 ` Javier Martinez Canillas
2013-03-14 16:04 ` Jon Hunter
2013-03-14 16:08 ` Benoit Cousson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1362763654-9660-8-git-send-email-jon-hunter@ti.com \
--to=jon-hunter@ti.com \
--cc=b-cousson@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox