From: Jon Hunter <jon-hunter@ti.com>
To: Tony Lindgren <tony@atomide.com>, Benoit Cousson <b-cousson@ti.com>
Cc: device-tree <devicetree-discuss@lists.ozlabs.org>,
linux-omap <linux-omap@vger.kernel.org>,
linux-arm <linux-arm-kernel@lists.infradead.org>,
Jon Hunter <jon-hunter@ti.com>
Subject: [PATCH 8/9] ARM: dts: OMAP3+: Correct gpio #interrupts-cells property
Date: Fri, 8 Mar 2013 11:27:32 -0600 [thread overview]
Message-ID: <1362763654-9660-9-git-send-email-jon-hunter@ti.com> (raw)
In-Reply-To: <1362763654-9660-1-git-send-email-jon-hunter@ti.com>
The OMAP gpio binding documention [1] states that the #interrupts-cells
property for gpio controllers should be 2. Currently, for OMAP3+ devices
the #interrupt-cells is set to 1. By setting this property to 2, it
allows clients to pass a 2nd parameter indicating the sensitivity (level
or edge) and polarity (high or low) of the interrupt. The OMAP gpio
controllers support these options and so update the #interrupt-cells
property for OMAP3+ devices to 2.
[1] Documentation/devicetree/bindings/gpio/gpio-omap.txt
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
arch/arm/boot/dts/omap3.dtsi | 12 ++++++------
arch/arm/boot/dts/omap4.dtsi | 12 ++++++------
arch/arm/boot/dts/omap5.dtsi | 16 ++++++++--------
3 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 5b36de5..c9bedf7 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -117,7 +117,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio2: gpio@49050000 {
@@ -126,7 +126,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio3: gpio@49052000 {
@@ -135,7 +135,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio4: gpio@49054000 {
@@ -144,7 +144,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio5: gpio@49056000 {
@@ -153,7 +153,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio6: gpio@49058000 {
@@ -162,7 +162,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
uart1: serial@4806a000 {
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 726ef11..544be06 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -138,7 +138,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio2: gpio@48055000 {
@@ -149,7 +149,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio3: gpio@48057000 {
@@ -160,7 +160,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio4: gpio@48059000 {
@@ -171,7 +171,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio5: gpio@4805b000 {
@@ -182,7 +182,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio6: gpio@4805d000 {
@@ -193,7 +193,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpmc: gpmc@50000000 {
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 34f41ad..93feb50 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -128,7 +128,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio2: gpio@48055000 {
@@ -139,7 +139,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio3: gpio@48057000 {
@@ -150,7 +150,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio4: gpio@48059000 {
@@ -161,7 +161,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio5: gpio@4805b000 {
@@ -172,7 +172,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio6: gpio@4805d000 {
@@ -183,7 +183,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio7: gpio@48051000 {
@@ -194,7 +194,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio8: gpio@48053000 {
@@ -205,7 +205,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpmc: gpmc@50000000 {
--
1.7.10.4
next prev parent reply other threads:[~2013-03-08 17:28 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-08 17:27 [PATCH 0/9] ARM: dts: Various OMAP2+ device-tree updates Jon Hunter
2013-03-08 17:27 ` [PATCH 1/9] ARM: OMAP2+: Prepare for device-tree PMU support Jon Hunter
2013-03-08 17:27 ` [PATCH 2/9] ARM: dts: OMAP2+: Add PMU nodes Jon Hunter
2013-03-08 17:27 ` [PATCH 3/9] ARM: dts: OMAP2+: Add SDMA controller bindings and nodes Jon Hunter
2013-03-08 17:27 ` [PATCH 4/9] ARM: dts: OMAP3: Add support for OMAP3430 SDP board Jon Hunter
2013-03-09 2:25 ` Anil Kumar
2013-03-11 17:53 ` Jon Hunter
2013-03-12 2:42 ` Kumar, Anil
2013-03-12 8:50 ` Javier Martinez Canillas
2013-03-13 2:50 ` Kumar, Anil
2013-03-12 21:27 ` Jon Hunter
2013-03-13 2:59 ` Kumar, Anil
2013-03-11 2:45 ` Anil Kumar
2013-03-11 17:54 ` Jon Hunter
2013-03-08 17:27 ` [PATCH 5/9] ARM: dts: Add GPMC node for OMAP2, OMAP4 and OMAP5 Jon Hunter
2013-03-08 20:25 ` Javier Martinez Canillas
2013-03-08 21:41 ` Jon Hunter
2013-03-09 1:25 ` Javier Martinez Canillas
2013-03-09 12:42 ` Ezequiel Garcia
2013-03-11 17:56 ` Jon Hunter
2013-03-14 15:45 ` Benoit Cousson
2013-03-14 15:50 ` Jon Hunter
2013-03-14 15:57 ` Ezequiel Garcia
2013-03-14 15:58 ` Benoit Cousson
2013-03-14 16:00 ` Jon Hunter
2013-03-14 16:03 ` Benoit Cousson
2013-03-08 17:27 ` [PATCH 6/9] ARM: dts: Add OMAP3430 SDP flash memory bindings Jon Hunter
2013-03-08 17:27 ` [PATCH 7/9] ARM: dts: Add OMAP2 gpio bindings Jon Hunter
2013-03-08 17:27 ` Jon Hunter [this message]
2013-03-08 17:27 ` [PATCH 9/9] ARM: dts: OMAP3: Add reg and interrupt properties for gpio Jon Hunter
2013-03-14 14:57 ` [PATCH 0/9] ARM: dts: Various OMAP2+ device-tree updates Benoit Cousson
2013-03-14 15:45 ` Florian Vaussard
2013-03-14 15:59 ` Jon Hunter
2013-03-14 16:06 ` Benoit Cousson
2013-03-14 16:02 ` Javier Martinez Canillas
2013-03-14 16:04 ` Jon Hunter
2013-03-14 16:08 ` Benoit Cousson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1362763654-9660-9-git-send-email-jon-hunter@ti.com \
--to=jon-hunter@ti.com \
--cc=b-cousson@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox