From: David Rivshin <drivshin@awxrd.com>
To: linux-gpio@vger.kernel.org, linux-omap@vger.kernel.org,
Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Santosh Shilimkar <ssantosh@kernel.org>,
Kevin Hilman <khilman@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Alexandre Courbot <gnurou@gmail.com>,
linux-arm@vger.kernel.org, linux-kernel@vger.kernel.org,
stable@vger.kernel.org
Subject: [PATCH 2/2] gpio: omap: compute debounce-time from actual debounce-clock rate
Date: Thu, 16 Mar 2017 21:48:56 -0400 [thread overview]
Message-ID: <20170317014856.31449-3-drivshin@awxrd.com> (raw)
In-Reply-To: <20170317014856.31449-1-drivshin@awxrd.com>
From: David Rivshin <DRivshin@allworx.com>
omap2_set_gpio_debounce() assumes the debounce clock runs at 32768Hz,
leading to 31us granularity. In reality the debounce clock (which
is provided by other modules) could be at different rate, leading to
an incorrect computation of the number of debounce clock cycles for
GPIO_DEBOUNCINGTIME[DEBOUNCETIME].
Also, even with a standard 32768Hz input clock, the actual granularity
is ~30.5us. This leads to the actual debounce time being ~1.5% too
short.
Fix both issues by simply querying the dbck rate, rather than
hardcoding.
Fixes: e85ec6c3047b ("gpio: omap: fix omap2_set_gpio_debounce")
Cc: <stable@vger.kernel.org> # 4.3+
Signed-off-by: David Rivshin <drivshin@allworx.com>
---
This logical bug existed before e85ec6c3047b, but if backporting
further it's probably best to just cherry-pick/backport e85ec6c3047b
first.
drivers/gpio/gpio-omap.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index c40dbdd..66dbe37 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -205,8 +205,8 @@ static inline void omap_gpio_dbck_disable(struct gpio_bank *bank)
* @offset: the gpio number on this @bank
* @debounce: debounce time to use
*
- * OMAP's debounce time is in 31us steps
- * <debounce time> = (GPIO_DEBOUNCINGTIME[7:0].DEBOUNCETIME + 1) x 31
+ * OMAP's debounce time is in 1/DBCK steps
+ * <debounce time> = (GPIO_DEBOUNCINGTIME[7:0].DEBOUNCETIME + 1) / DBCK
* so we need to convert and round up to the closest unit.
*
* Return: 0 on success, negative error otherwise.
@@ -223,7 +223,9 @@ static int omap2_set_gpio_debounce(struct gpio_bank *bank, unsigned offset,
return -ENOTSUPP;
if (enable) {
- debounce = DIV_ROUND_UP(debounce, 31) - 1;
+ u64 tmp = (u64)debounce * clk_get_rate(bank->dbck);
+
+ debounce = DIV_ROUND_UP_ULL(tmp, 1000000) - 1;
if ((debounce & OMAP4_GPIO_DEBOUNCINGTIME_MASK) != debounce)
return -EINVAL;
}
--
2.9.3
next prev parent reply other threads:[~2017-03-17 1:48 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-17 1:48 [PATCH 0/2] gpio: omap: set_debounce fixes David Rivshin
2017-03-17 1:48 ` [PATCH 1/2] gpio: omap: return error if requested debounce time is not possible David Rivshin
2017-03-17 1:48 ` David Rivshin [this message]
[not found] <20170317005704.11971-1-drivshin@awxrd.com>
[not found] ` <20170317005704.11971-3-drivshin@awxrd.com>
2017-03-17 19:43 ` [PATCH 2/2] gpio: omap: compute debounce-time from actual debounce-clock rate Grygorii Strashko
2017-03-17 23:14 ` David Rivshin
2017-03-18 0:06 ` Grygorii Strashko
2017-04-20 13:53 ` David Rivshin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170317014856.31449-3-drivshin@awxrd.com \
--to=drivshin@awxrd.com \
--cc=gnurou@gmail.com \
--cc=grygorii.strashko@ti.com \
--cc=khilman@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=ssantosh@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox