From: Bjorn Helgaas <helgaas@kernel.org>
To: Richard Zhu <hongxing.zhu@nxp.com>,
Lucas Stach <l.stach@pengutronix.de>,
Rob Herring <robh+dt@kernel.org>, Mark Brown <broonie@kernel.org>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Fabio Estevam <festevam@gmail.com>,
Francesco Dolcini <francesco.dolcini@toradex.com>
Cc: linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kernel@pengutronix.de,
linux-imx@nxp.com, Bjorn Helgaas <bhelgaas@google.com>
Subject: [PATCH v12 12/13] PCI: imx6: Do not hide phy driver callbacks and refine the error handling
Date: Wed, 15 Jun 2022 18:15:50 -0500 [thread overview]
Message-ID: <20220615231551.1054753-13-helgaas@kernel.org> (raw)
In-Reply-To: <20220615231551.1054753-1-helgaas@kernel.org>
From: Richard Zhu <hongxing.zhu@nxp.com>
- Move the phy_power_on() to host_init and resume functions from
imx6_pcie_clk_enable().
- Move the phy_init() to host_init and resume functions from
imx6_pcie_deassert_core_reset().
Refine the error handling in imx6_pcie_host_init() and
imx6_pcie_resume_noirq() functions accordingly.
[bhelgaas: add "ret" back since it's used again]
Link: https://lore.kernel.org/r/1655189942-12678-9-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
drivers/pci/controller/dwc/pci-imx6.c | 70 +++++++++++++++++++++------
1 file changed, 56 insertions(+), 14 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index b6e5420d67b6..bd736aff94a3 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -639,14 +639,6 @@ static int imx6_pcie_clk_enable(struct imx6_pcie *imx6_pcie)
goto err_ref_clk;
}
- switch (imx6_pcie->drvdata->variant) {
- case IMX8MM:
- if (phy_power_on(imx6_pcie->phy))
- dev_err(dev, "unable to power on PHY\n");
- break;
- default:
- break;
- }
/* allow the clocks to stabilize */
usleep_range(200, 500);
return 0;
@@ -733,10 +725,6 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
case IMX8MQ:
reset_control_deassert(imx6_pcie->pciephy_reset);
break;
- case IMX8MM:
- if (phy_init(imx6_pcie->phy))
- dev_err(dev, "waiting for phy ready timeout!\n");
- break;
case IMX7D:
reset_control_deassert(imx6_pcie->pciephy_reset);
@@ -772,6 +760,7 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
usleep_range(200, 500);
break;
case IMX6Q: /* Nothing to do */
+ case IMX8MM:
break;
}
@@ -923,15 +912,39 @@ static int imx6_pcie_host_init(struct pcie_port *pp)
imx6_pcie_assert_core_reset(imx6_pcie);
imx6_pcie_init_phy(imx6_pcie);
+ if (imx6_pcie->phy) {
+ ret = phy_power_on(imx6_pcie->phy);
+ if (ret) {
+ dev_err(dev, "pcie phy power up failed.\n");
+ return ret;
+ }
+ }
+
ret = imx6_pcie_deassert_core_reset(imx6_pcie);
if (ret < 0) {
dev_err(dev, "pcie host init failed: %d\n", ret);
- return ret;
+ goto err_phy_off;
+ }
+ if (imx6_pcie->phy) {
+ ret = phy_init(imx6_pcie->phy);
+ if (ret) {
+ dev_err(dev, "waiting for phy ready timeout!\n");
+ goto err_phy_init;
+ }
}
imx6_setup_phy_mpll(imx6_pcie);
return 0;
+
+err_phy_init:
+ imx6_pcie_clk_disable(imx6_pcie);
+ if (imx6_pcie->vpcie)
+ regulator_disable(imx6_pcie->vpcie);
+err_phy_off:
+ if (imx6_pcie->phy)
+ phy_power_off(imx6_pcie->phy);
+ return ret;
}
static const struct dw_pcie_host_ops imx6_pcie_host_ops = {
@@ -1029,18 +1042,47 @@ static int imx6_pcie_resume_noirq(struct device *dev)
{
struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
struct pcie_port *pp = &imx6_pcie->pci->pp;
+ int ret;
if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_SUPPORTS_SUSPEND))
return 0;
imx6_pcie_assert_core_reset(imx6_pcie);
imx6_pcie_init_phy(imx6_pcie);
- imx6_pcie_deassert_core_reset(imx6_pcie);
+ if (imx6_pcie->phy) {
+ ret = phy_power_on(imx6_pcie->phy);
+ if (ret) {
+ dev_err(dev, "pcie phy power up failed.\n");
+ return ret;
+ }
+ }
+
+ ret = imx6_pcie_deassert_core_reset(imx6_pcie);
+ if (ret < 0) {
+ dev_err(dev, "pcie deassert core reset failed: %d.\n", ret);
+ goto err_phy_off;
+ } else if (imx6_pcie->phy) {
+ ret = phy_init(imx6_pcie->phy);
+ if (ret) {
+ dev_err(dev, "pcie phy init failed.\n");
+ goto err_phy_init;
+ }
+ }
+
dw_pcie_setup_rc(pp);
if (imx6_pcie->link_is_up)
imx6_pcie_start_link(imx6_pcie->pci);
return 0;
+
+err_phy_init:
+ imx6_pcie_clk_disable(imx6_pcie);
+ if (imx6_pcie->vpcie)
+ regulator_disable(imx6_pcie->vpcie);
+err_phy_off:
+ if (imx6_pcie->phy)
+ phy_power_off(imx6_pcie->phy);
+ return ret;
}
#endif
--
2.25.1
next prev parent reply other threads:[~2022-06-15 23:17 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-15 23:15 [PATCH v12 00/13] PCI: imx6: refine codes and add the error propagation Bjorn Helgaas
2022-06-15 23:15 ` [PATCH v12 01/13] PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier Bjorn Helgaas
2022-06-16 2:23 ` Hongxing Zhu
2022-06-15 23:15 ` [PATCH v12 02/13] PCI: imx6: Move PHY management functions together Bjorn Helgaas
2022-06-16 2:23 ` Hongxing Zhu
2022-06-15 23:15 ` [PATCH v12 03/13] PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier Bjorn Helgaas
2022-06-16 2:23 ` Hongxing Zhu
2022-06-15 23:15 ` [PATCH v12 04/13] PCI: imx6: Move imx6_pcie_clk_disable() earlier Bjorn Helgaas
2022-06-15 23:15 ` [PATCH v12 05/13] PCI: imx6: Factor out ref clock disable to match enable Bjorn Helgaas
2022-06-16 2:23 ` Hongxing Zhu
2022-06-15 23:15 ` [PATCH v12 06/13] PCI: imx6: Collect clock enables in imx6_pcie_clk_enable() Bjorn Helgaas
2022-06-15 23:15 ` [PATCH v12 07/13] PCI: imx6: Propagate .host_init() errors to caller Bjorn Helgaas
2022-06-15 23:15 ` [PATCH v12 08/13] PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks Bjorn Helgaas
2022-06-15 23:15 ` [PATCH v12 09/13] PCI: imx6: Turn off regulator when system is in suspend mode Bjorn Helgaas
2022-06-15 23:30 ` Bjorn Helgaas
2022-06-16 2:23 ` Hongxing Zhu
2022-06-16 15:56 ` Bjorn Helgaas
2022-06-17 5:57 ` Hongxing Zhu
2022-06-15 23:15 ` [PATCH v12 10/13] PCI: imx6: Mark the link down as non-fatal error Bjorn Helgaas
2022-06-15 23:15 ` [PATCH v12 11/13] PCI: imx6: Reduce resume time by only starting link if it was up before suspend Bjorn Helgaas
2022-06-15 23:15 ` Bjorn Helgaas [this message]
2022-06-15 23:15 ` [PATCH v12 13/13] PCI: imx6: Disable clocks in reverse order of enable Bjorn Helgaas
2022-06-15 23:27 ` Bjorn Helgaas
2022-06-16 2:23 ` Hongxing Zhu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220615231551.1054753-13-helgaas@kernel.org \
--to=helgaas@kernel.org \
--cc=bhelgaas@google.com \
--cc=broonie@kernel.org \
--cc=festevam@gmail.com \
--cc=francesco.dolcini@toradex.com \
--cc=hongxing.zhu@nxp.com \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox