From: Bjorn Helgaas <helgaas@kernel.org>
To: Richard Zhu <hongxing.zhu@nxp.com>,
Lucas Stach <l.stach@pengutronix.de>,
Rob Herring <robh+dt@kernel.org>, Mark Brown <broonie@kernel.org>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Fabio Estevam <festevam@gmail.com>,
Francesco Dolcini <francesco.dolcini@toradex.com>
Cc: linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kernel@pengutronix.de,
linux-imx@nxp.com, Bjorn Helgaas <bhelgaas@google.com>
Subject: [PATCH v12 01/13] PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier
Date: Wed, 15 Jun 2022 18:15:39 -0500 [thread overview]
Message-ID: <20220615231551.1054753-2-helgaas@kernel.org> (raw)
In-Reply-To: <20220615231551.1054753-1-helgaas@kernel.org>
From: Bjorn Helgaas <bhelgaas@google.com>
Move imx6_pcie_grp_offset() and imx6_pcie_configure_type() earlier in the
file since they depend on nothing and are used by several other functions
that will be moved earlier. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
drivers/pci/controller/dwc/pci-imx6.c | 50 +++++++++++++--------------
1 file changed, 25 insertions(+), 25 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 7a285fb0f619..8653ca8cbfb9 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -146,6 +146,31 @@ struct imx6_pcie {
#define PHY_RX_OVRD_IN_LO_RX_DATA_EN BIT(5)
#define PHY_RX_OVRD_IN_LO_RX_PLL_EN BIT(3)
+static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie)
+{
+ WARN_ON(imx6_pcie->drvdata->variant != IMX8MQ &&
+ imx6_pcie->drvdata->variant != IMX8MM);
+ return imx6_pcie->controller_id == 1 ? IOMUXC_GPR16 : IOMUXC_GPR14;
+}
+
+static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
+{
+ unsigned int mask, val;
+
+ if (imx6_pcie->drvdata->variant == IMX8MQ &&
+ imx6_pcie->controller_id == 1) {
+ mask = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE;
+ val = FIELD_PREP(IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
+ PCI_EXP_TYPE_ROOT_PORT);
+ } else {
+ mask = IMX6Q_GPR12_DEVICE_TYPE;
+ val = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE,
+ PCI_EXP_TYPE_ROOT_PORT);
+ }
+
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, mask, val);
+}
+
static int pcie_phy_poll_ack(struct imx6_pcie *imx6_pcie, bool exp_val)
{
struct dw_pcie *pci = imx6_pcie->pci;
@@ -415,13 +440,6 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
imx6_pcie->gpio_active_high);
}
-static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie)
-{
- WARN_ON(imx6_pcie->drvdata->variant != IMX8MQ &&
- imx6_pcie->drvdata->variant != IMX8MM);
- return imx6_pcie->controller_id == 1 ? IOMUXC_GPR16 : IOMUXC_GPR14;
-}
-
static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
{
struct dw_pcie *pci = imx6_pcie->pci;
@@ -617,24 +635,6 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
}
}
-static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
-{
- unsigned int mask, val;
-
- if (imx6_pcie->drvdata->variant == IMX8MQ &&
- imx6_pcie->controller_id == 1) {
- mask = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE;
- val = FIELD_PREP(IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
- PCI_EXP_TYPE_ROOT_PORT);
- } else {
- mask = IMX6Q_GPR12_DEVICE_TYPE;
- val = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE,
- PCI_EXP_TYPE_ROOT_PORT);
- }
-
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, mask, val);
-}
-
static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
{
switch (imx6_pcie->drvdata->variant) {
--
2.25.1
next prev parent reply other threads:[~2022-06-15 23:16 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-15 23:15 [PATCH v12 00/13] PCI: imx6: refine codes and add the error propagation Bjorn Helgaas
2022-06-15 23:15 ` Bjorn Helgaas [this message]
2022-06-16 2:23 ` [PATCH v12 01/13] PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier Hongxing Zhu
2022-06-15 23:15 ` [PATCH v12 02/13] PCI: imx6: Move PHY management functions together Bjorn Helgaas
2022-06-16 2:23 ` Hongxing Zhu
2022-06-15 23:15 ` [PATCH v12 03/13] PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier Bjorn Helgaas
2022-06-16 2:23 ` Hongxing Zhu
2022-06-15 23:15 ` [PATCH v12 04/13] PCI: imx6: Move imx6_pcie_clk_disable() earlier Bjorn Helgaas
2022-06-15 23:15 ` [PATCH v12 05/13] PCI: imx6: Factor out ref clock disable to match enable Bjorn Helgaas
2022-06-16 2:23 ` Hongxing Zhu
2022-06-15 23:15 ` [PATCH v12 06/13] PCI: imx6: Collect clock enables in imx6_pcie_clk_enable() Bjorn Helgaas
2022-06-15 23:15 ` [PATCH v12 07/13] PCI: imx6: Propagate .host_init() errors to caller Bjorn Helgaas
2022-06-15 23:15 ` [PATCH v12 08/13] PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks Bjorn Helgaas
2022-06-15 23:15 ` [PATCH v12 09/13] PCI: imx6: Turn off regulator when system is in suspend mode Bjorn Helgaas
2022-06-15 23:30 ` Bjorn Helgaas
2022-06-16 2:23 ` Hongxing Zhu
2022-06-16 15:56 ` Bjorn Helgaas
2022-06-17 5:57 ` Hongxing Zhu
2022-06-15 23:15 ` [PATCH v12 10/13] PCI: imx6: Mark the link down as non-fatal error Bjorn Helgaas
2022-06-15 23:15 ` [PATCH v12 11/13] PCI: imx6: Reduce resume time by only starting link if it was up before suspend Bjorn Helgaas
2022-06-15 23:15 ` [PATCH v12 12/13] PCI: imx6: Do not hide phy driver callbacks and refine the error handling Bjorn Helgaas
2022-06-15 23:15 ` [PATCH v12 13/13] PCI: imx6: Disable clocks in reverse order of enable Bjorn Helgaas
2022-06-15 23:27 ` Bjorn Helgaas
2022-06-16 2:23 ` Hongxing Zhu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220615231551.1054753-2-helgaas@kernel.org \
--to=helgaas@kernel.org \
--cc=bhelgaas@google.com \
--cc=broonie@kernel.org \
--cc=festevam@gmail.com \
--cc=francesco.dolcini@toradex.com \
--cc=hongxing.zhu@nxp.com \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox