From: Bjorn Helgaas <helgaas@kernel.org>
To: Richard Zhu <hongxing.zhu@nxp.com>,
Lucas Stach <l.stach@pengutronix.de>,
Rob Herring <robh+dt@kernel.org>, Mark Brown <broonie@kernel.org>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Fabio Estevam <festevam@gmail.com>,
Francesco Dolcini <francesco.dolcini@toradex.com>
Cc: linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kernel@pengutronix.de,
linux-imx@nxp.com, Bjorn Helgaas <bhelgaas@google.com>
Subject: [PATCH v12 07/13] PCI: imx6: Propagate .host_init() errors to caller
Date: Wed, 15 Jun 2022 18:15:45 -0500 [thread overview]
Message-ID: <20220615231551.1054753-8-helgaas@kernel.org> (raw)
In-Reply-To: <20220615231551.1054753-1-helgaas@kernel.org>
From: Richard Zhu <hongxing.zhu@nxp.com>
Since dw_pcie_host_init() checks for errors from ops->host_init(),
check for errors when enabling power regulators and clocks and return them.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/1655189942-12678-3-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
---
drivers/pci/controller/dwc/pci-imx6.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index e36ca08a7c51..90ab9397a935 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -708,7 +708,7 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
imx6_pcie->gpio_active_high);
}
-static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
+static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
{
struct dw_pcie *pci = imx6_pcie->pci;
struct device *dev = pci->dev;
@@ -719,7 +719,7 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
if (ret) {
dev_err(dev, "failed to enable vpcie regulator: %d\n",
ret);
- return;
+ return ret;
}
}
@@ -785,7 +785,7 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
msleep(100);
}
- return;
+ return 0;
err_clks:
if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
@@ -794,6 +794,7 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
dev_err(dev, "failed to disable vpcie regulator: %d\n",
ret);
}
+ return err;
}
static int imx6_pcie_wait_for_speed_change(struct imx6_pcie *imx6_pcie)
@@ -912,11 +913,18 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
static int imx6_pcie_host_init(struct pcie_port *pp)
{
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+ struct device *dev = pci->dev;
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
+ int ret;
imx6_pcie_assert_core_reset(imx6_pcie);
imx6_pcie_init_phy(imx6_pcie);
- imx6_pcie_deassert_core_reset(imx6_pcie);
+ ret = imx6_pcie_deassert_core_reset(imx6_pcie);
+ if (ret < 0) {
+ dev_err(dev, "pcie host init failed: %d\n", ret);
+ return ret;
+ }
+
imx6_setup_phy_mpll(imx6_pcie);
return 0;
--
2.25.1
next prev parent reply other threads:[~2022-06-15 23:16 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-15 23:15 [PATCH v12 00/13] PCI: imx6: refine codes and add the error propagation Bjorn Helgaas
2022-06-15 23:15 ` [PATCH v12 01/13] PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier Bjorn Helgaas
2022-06-16 2:23 ` Hongxing Zhu
2022-06-15 23:15 ` [PATCH v12 02/13] PCI: imx6: Move PHY management functions together Bjorn Helgaas
2022-06-16 2:23 ` Hongxing Zhu
2022-06-15 23:15 ` [PATCH v12 03/13] PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier Bjorn Helgaas
2022-06-16 2:23 ` Hongxing Zhu
2022-06-15 23:15 ` [PATCH v12 04/13] PCI: imx6: Move imx6_pcie_clk_disable() earlier Bjorn Helgaas
2022-06-15 23:15 ` [PATCH v12 05/13] PCI: imx6: Factor out ref clock disable to match enable Bjorn Helgaas
2022-06-16 2:23 ` Hongxing Zhu
2022-06-15 23:15 ` [PATCH v12 06/13] PCI: imx6: Collect clock enables in imx6_pcie_clk_enable() Bjorn Helgaas
2022-06-15 23:15 ` Bjorn Helgaas [this message]
2022-06-15 23:15 ` [PATCH v12 08/13] PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks Bjorn Helgaas
2022-06-15 23:15 ` [PATCH v12 09/13] PCI: imx6: Turn off regulator when system is in suspend mode Bjorn Helgaas
2022-06-15 23:30 ` Bjorn Helgaas
2022-06-16 2:23 ` Hongxing Zhu
2022-06-16 15:56 ` Bjorn Helgaas
2022-06-17 5:57 ` Hongxing Zhu
2022-06-15 23:15 ` [PATCH v12 10/13] PCI: imx6: Mark the link down as non-fatal error Bjorn Helgaas
2022-06-15 23:15 ` [PATCH v12 11/13] PCI: imx6: Reduce resume time by only starting link if it was up before suspend Bjorn Helgaas
2022-06-15 23:15 ` [PATCH v12 12/13] PCI: imx6: Do not hide phy driver callbacks and refine the error handling Bjorn Helgaas
2022-06-15 23:15 ` [PATCH v12 13/13] PCI: imx6: Disable clocks in reverse order of enable Bjorn Helgaas
2022-06-15 23:27 ` Bjorn Helgaas
2022-06-16 2:23 ` Hongxing Zhu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220615231551.1054753-8-helgaas@kernel.org \
--to=helgaas@kernel.org \
--cc=bhelgaas@google.com \
--cc=broonie@kernel.org \
--cc=festevam@gmail.com \
--cc=francesco.dolcini@toradex.com \
--cc=hongxing.zhu@nxp.com \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox