[PATCH v3 00/38] Kconfig: Introduce HAS_IOPORT config option

[PATCH v3 00/38] Kconfig: Introduce HAS_IOPORT config option

[Niklas Schnelle]

Hello Kernel Hackers,

Some platforms such as s390 do not support PCI I/O spaces. On such platforms
I/O space accessors like inb()/outb() are stubs that can never actually work.
The way these stubs are implemented in asm-generic/io.h leads to compiler
warnings because any use will be a NULL pointer access on these platforms. In
a previous patch we tried handling this with a run-time warning on access. This
approach however was rejected by Linus[0] with the argument that this really
should be a compile-time check and, though a much more invasive change, we
believe that is indeed the right approach.

This patch series aims to do exactly that by introducing a HAS_IOPORT config
option akin to the existing HAS_IOMEM. When this is unset inb()/outb() and
friends may not be defined. This is also the same approach originally planned by
Uwe Kleine-König as mentioned in commit ce816fa88cca ("Kconfig: rename
HAS_IOPORT to HAS_IOPORT_MAP").

This series builds heavily on an original patch for demonstating the concept by
Arnd Bergmann[1] and incoporates feedback of previous RFC versions [2] and [3].

This version is based on v6.3-rc1 and is also available on my kernel.org tree
in the has_ioport_v3 branch with the PGP signed tag has_ioport_v3_signed:

https://git.kernel.org/pub/scm/linux/kernel/git/niks/linux.git

Thanks,
Niklas Schnelle

Changes from RFC v2:
- Rebased on v6.3-rc1
- Fixed a NULL pointer dereference in set_io_from_upio() due to accidentially
  expanded #ifdef CONFIG_SERIAL_8250_RT288X (kernel test robot)
- Dropped "ACPI: add dependency on HAS_IOPORT" (Bjorn Helgaas)
- Reworded commit message and moved ifdefs for "PCI/sysfs: Make I/O resource
  depend on HAS_IOPORT" (Bjorn Helgaas)
- Instead of complete removal inb() etc. are marked with __compiletime_error()
  when HAS_IOPORT is unset allowing for better error reporting (Ahmad Fatoum)
- Removed HAS_IOPORT dependency from PCMCIA as I/O port use is optional in at
  least PC Card. Instead added HAS_IOPORT on a per driver basis. (Bjorn
  Helgaas)
- Made uhci_has_pci_registers() constant 0 if HAS_IOPORT is not defined (Alan
  Stern)

Changes from RFC v1:
- Completely dropped the LEGACY_PCI option and replaced its dependencies with
  HAS_IOPORT as appropriate
- In the usb subsystem patch I incorporated the feedback from v1 by Alan Stern:
  - Used a local macro to nop in*()/out*() in the helpers
  - Removed an unnecessary further restriction on CONFIG_USB_UHCI_HCD
- Added a few more subsystems including wireless, ptp, and, mISDN that I had
  previously missed due to a blanket !S390.
- Removed blanket !S390 dependencies where they are added due to the I/O port
  problem
- In the sound system SND_OPL3_LIB needed to use "depends on" instead of
  "select" because of its added HAS_IOPORT dependency
- In the drm subsystem the bochs driver gets #ifdefs instead of a blanket
  dependency because its MMIO capable device variant should work without
  HAS_IOPORT.

[0] https://lore.kernel.org/lkml/CAHk-=wg80je=K7madF4e7WrRNp37e3qh6y10Svhdc7O8SZ_-8g@mail.gmail.com/
[1] https://lore.kernel.org/lkml/CAK8P3a0MNbx-iuzW_-=0ab6-TTZzwV-PT_6gAC1Gp5PgYyHcrA@mail.gmail.com/
[2] https://yhbt.net/lore/all/20211227164317.4146918-1-schnelle@linux.ibm.com/
[3] https://lore.kernel.org/all/20220429135108.2781579-1-schnelle@linux.ibm.com/

Niklas Schnelle (38):
  Kconfig: introduce HAS_IOPORT option and select it as necessary
  ata: add HAS_IOPORT dependencies
  char: impi, tpm: depend on HAS_IOPORT
  comedi: add HAS_IOPORT dependencies
  counter: add HAS_IOPORT dependencies
  /dev/port: don't compile file operations without CONFIG_DEVPORT
  drm: handle HAS_IOPORT dependencies
  firmware: dmi-sysfs: handle HAS_IOPORT=n
  gpio: add HAS_IOPORT dependencies
  hwmon: add HAS_IOPORT dependencies
  i2c: add HAS_IOPORT dependencies
  iio: ad7606: Kconfig: add HAS_IOPORT dependencies
  Input: add HAS_IOPORT dependencies
  Input: gameport: add ISA and HAS_IOPORT dependencies
  leds: add HAS_IOPORT dependencies
  media: add HAS_IOPORT dependencies
  misc: add HAS_IOPORT dependencies
  mISDN: add HAS_IOPORT dependencies
  mpt fusion: add HAS_IOPORT dependencies
  net: handle HAS_IOPORT dependencies
  parport: PC style parport depends on HAS_IOPORT
  PCI: Make quirk using inw() depend on HAS_IOPORT
  PCI/sysfs: Make I/O resource depend on HAS_IOPORT
  pcmcia: add HAS_IOPORT dependencies
  platform: add HAS_IOPORT dependencies
  pnp: add HAS_IOPORT dependencies
  power: add HAS_IOPORT dependencies
  rtc: add HAS_IOPORT dependencies
  scsi: add HAS_IOPORT dependencies
  sound: add HAS_IOPORT dependencies
  speakup: add HAS_IOPORT dependency for SPEAKUP_SERIALIO
  staging: add HAS_IOPORT dependencies
  tty: serial: handle HAS_IOPORT dependencies
  usb: handle HAS_IOPORT dependencies
  video: handle HAS_IOPORT dependencies
  watchdog: add HAS_IOPORT dependencies
  wireless: add HAS_IOPORT dependencies
  asm-generic/io.h: drop inb() etc for HAS_IOPORT=n

 arch/alpha/Kconfig                           |   1 +
 arch/arm/Kconfig                             |   1 +
 arch/arm64/Kconfig                           |   1 +
 arch/ia64/Kconfig                            |   1 +
 arch/m68k/Kconfig                            |   1 +
 arch/microblaze/Kconfig                      |   1 +
 arch/mips/Kconfig                            |   2 +
 arch/parisc/Kconfig                          |   2 +
 arch/powerpc/Kconfig                         |   2 +-
 arch/riscv/Kconfig                           |   1 +
 arch/sh/Kconfig                              |   1 +
 arch/sparc/Kconfig                           |   1 +
 arch/um/Kconfig                              |   1 +
 arch/x86/Kconfig                             |   2 +
 drivers/accessibility/speakup/Kconfig        |   1 +
 drivers/ata/Kconfig                          |   1 +
 drivers/bus/Kconfig                          |   2 +-
 drivers/char/Kconfig                         |   3 +-
 drivers/char/ipmi/Makefile                   |  11 +-
 drivers/char/ipmi/ipmi_si_intf.c             |   3 +-
 drivers/char/ipmi/ipmi_si_pci.c              |   3 +
 drivers/char/mem.c                           |   6 +-
 drivers/char/pcmcia/Kconfig                  |   8 +-
 drivers/char/tpm/Kconfig                     |   1 +
 drivers/char/tpm/tpm_infineon.c              |  14 ++-
 drivers/char/tpm/tpm_tis_core.c              |  19 ++-
 drivers/comedi/Kconfig                       | 103 +++++++++------
 drivers/counter/Kconfig                      |   1 +
 drivers/eisa/Kconfig                         |   1 +
 drivers/firmware/dmi-sysfs.c                 |   4 +
 drivers/gpio/Kconfig                         |   2 +-
 drivers/gpu/drm/qxl/Kconfig                  |   1 +
 drivers/gpu/drm/tiny/bochs.c                 |  19 +++
 drivers/gpu/drm/tiny/cirrus.c                |   2 +
 drivers/hwmon/Kconfig                        |  21 +++-
 drivers/i2c/busses/Kconfig                   |  31 ++---
 drivers/iio/adc/Kconfig                      |   2 +-
 drivers/input/gameport/Kconfig               |   4 +-
 drivers/input/serio/Kconfig                  |   2 +
 drivers/input/touchscreen/Kconfig            |   1 +
 drivers/isdn/Kconfig                         |   1 -
 drivers/isdn/hardware/mISDN/Kconfig          |  12 +-
 drivers/leds/Kconfig                         |   2 +-
 drivers/media/pci/dm1105/Kconfig             |   2 +-
 drivers/media/radio/Kconfig                  |  14 ++-
 drivers/media/rc/Kconfig                     |   6 +
 drivers/message/fusion/Kconfig               |   2 +-
 drivers/misc/altera-stapl/Makefile           |   3 +-
 drivers/misc/altera-stapl/altera.c           |   6 +-
 drivers/net/Kconfig                          |   2 +-
 drivers/net/arcnet/Kconfig                   |   2 +-
 drivers/net/can/cc770/Kconfig                |   1 +
 drivers/net/can/sja1000/Kconfig              |   1 +
 drivers/net/ethernet/3com/Kconfig            |   4 +-
 drivers/net/ethernet/8390/Kconfig            |   6 +-
 drivers/net/ethernet/amd/Kconfig             |   4 +-
 drivers/net/ethernet/fujitsu/Kconfig         |   2 +-
 drivers/net/ethernet/intel/Kconfig           |   2 +-
 drivers/net/ethernet/sis/Kconfig             |   4 +-
 drivers/net/ethernet/smsc/Kconfig            |   2 +-
 drivers/net/ethernet/ti/Kconfig              |   2 +-
 drivers/net/ethernet/via/Kconfig             |   1 +
 drivers/net/ethernet/xircom/Kconfig          |   2 +-
 drivers/net/fddi/Kconfig                     |   2 +-
 drivers/net/fddi/defxx.c                     |   2 +-
 drivers/net/hamradio/Kconfig                 |   6 +-
 drivers/net/wan/Kconfig                      |   2 +-
 drivers/net/wireless/atmel/Kconfig           |   2 +-
 drivers/net/wireless/intersil/hostap/Kconfig |   2 +-
 drivers/parport/Kconfig                      |   4 +-
 drivers/pci/pci-sysfs.c                      |   4 +
 drivers/pci/quirks.c                         |   2 +
 drivers/pcmcia/Kconfig                       |   5 +-
 drivers/platform/chrome/Kconfig              |   1 +
 drivers/platform/chrome/wilco_ec/Kconfig     |   1 +
 drivers/pnp/isapnp/Kconfig                   |   2 +-
 drivers/power/reset/Kconfig                  |   1 +
 drivers/rtc/Kconfig                          |   4 +-
 drivers/scsi/Kconfig                         |  25 ++--
 drivers/scsi/aic7xxx/Kconfig.aic79xx         |   2 +-
 drivers/scsi/aic7xxx/Kconfig.aic7xxx         |   2 +-
 drivers/scsi/aic94xx/Kconfig                 |   2 +-
 drivers/scsi/megaraid/Kconfig.megaraid       |   6 +-
 drivers/scsi/mvsas/Kconfig                   |   2 +-
 drivers/scsi/pcmcia/Kconfig                  |   6 +-
 drivers/scsi/qla2xxx/Kconfig                 |   2 +-
 drivers/staging/sm750fb/Kconfig              |   2 +-
 drivers/staging/vt6655/Kconfig               |   2 +-
 drivers/tty/Kconfig                          |   2 +-
 drivers/tty/serial/8250/8250_early.c         |   4 +
 drivers/tty/serial/8250/8250_pci.c           |  14 +++
 drivers/tty/serial/8250/8250_port.c          |  44 +++++--
 drivers/tty/serial/8250/Kconfig              |   5 +-
 drivers/tty/serial/Kconfig                   |   2 +-
 drivers/usb/core/hcd-pci.c                   |   2 +
 drivers/usb/host/Kconfig                     |   4 +-
 drivers/usb/host/pci-quirks.c                | 125 ++++++++++---------
 drivers/usb/host/pci-quirks.h                |  31 +++--
 drivers/usb/host/uhci-hcd.c                  |   2 +-
 drivers/usb/host/uhci-hcd.h                  |  36 ++++--
 drivers/video/console/Kconfig                |   1 +
 drivers/video/fbdev/Kconfig                  |  25 ++--
 drivers/watchdog/Kconfig                     |   6 +-
 include/asm-generic/io.h                     |  60 +++++++++
 include/linux/gameport.h                     |   9 +-
 include/linux/parport.h                      |   2 +-
 include/video/vga.h                          |   8 ++
 lib/Kconfig                                  |   4 +
 lib/Kconfig.kgdb                             |   3 +-
 net/ax25/Kconfig                             |   2 +-
 sound/drivers/Kconfig                        |   3 +
 sound/isa/Kconfig                            |  31 ++++-
 sound/pci/Kconfig                            |  45 +++++--
 sound/pcmcia/Kconfig                         |   2 +
 114 files changed, 649 insertions(+), 281 deletions(-)


base-commit: eeac8ede17557680855031c6f305ece2378af326
-- 
2.37.2

[PATCH v3 01/38] Kconfig: introduce HAS_IOPORT option and select it as necessary

[Niklas Schnelle]

We introduce a new HAS_IOPORT Kconfig option to indicate support for I/O
Port access. In a future patch HAS_IOPORT=n will disable compilation of
the I/O accessor functions inb()/outb() and friends on architectures
which can not meaningfully support legacy I/O spaces such as s390. Also
add dependencies on HAS_IOPORT for the ISA and HAVE_EISA config options
as these busses always go along with HAS_IOPORT.

The "depends on" relations on HAS_IOPORT in drivers as well as ifdefs
for HAS_IOPORT specific sections will be added in subsequent patches on
a per subsystem basis.

Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
 arch/alpha/Kconfig      | 1 +
 arch/arm/Kconfig        | 1 +
 arch/arm64/Kconfig      | 1 +
 arch/ia64/Kconfig       | 1 +
 arch/m68k/Kconfig       | 1 +
 arch/microblaze/Kconfig | 1 +
 arch/mips/Kconfig       | 2 ++
 arch/parisc/Kconfig     | 2 ++
 arch/powerpc/Kconfig    | 2 +-
 arch/riscv/Kconfig      | 1 +
 arch/sh/Kconfig         | 1 +
 arch/sparc/Kconfig      | 1 +
 arch/um/Kconfig         | 1 +
 arch/x86/Kconfig        | 2 ++
 drivers/bus/Kconfig     | 2 +-
 drivers/eisa/Kconfig    | 1 +
 lib/Kconfig             | 4 ++++
 lib/Kconfig.kgdb        | 3 ++-
 18 files changed, 25 insertions(+), 3 deletions(-)

diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 780d4673c3ca..a5c2b1aa46b0 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -27,6 +27,7 @@ config ALPHA
 	select AUDIT_ARCH
 	select GENERIC_CPU_VULNERABILITIES
 	select GENERIC_SMP_IDLE_THREAD
+	select HAS_IOPORT
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_MOD_ARCH_SPECIFIC
 	select MODULES_USE_ELF_RELA
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e24a9820e12f..4acb5bc4b52a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -70,6 +70,7 @@ config ARM
 	select GENERIC_SCHED_CLOCK
 	select GENERIC_SMP_IDLE_THREAD
 	select HARDIRQS_SW_RESEND
+	select HAS_IOPORT
 	select HAVE_ARCH_AUDITSYSCALL if AEABI && !OABI_COMPAT
 	select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6
 	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 1023e896d46b..b740019c4aee 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -145,6 +145,7 @@ config ARM64
 	select GENERIC_GETTIMEOFDAY
 	select GENERIC_VDSO_TIME_NS
 	select HARDIRQS_SW_RESEND
+	select HAS_IOPORT
 	select HAVE_MOVE_PMD
 	select HAVE_MOVE_PUD
 	select HAVE_PCI
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index d7e4a24e8644..2e13ec8263b9 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -25,6 +25,7 @@ config IA64
 	select PCI_DOMAINS if PCI
 	select PCI_MSI
 	select PCI_SYSCALL if PCI
+	select HAS_IOPORT
 	select HAVE_ASM_MODVERSIONS
 	select HAVE_UNSTABLE_SCHED_CLOCK
 	select HAVE_EXIT_THREAD
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 82154952e574..40198a1ebe27 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -18,6 +18,7 @@ config M68K
 	select GENERIC_CPU_DEVICES
 	select GENERIC_IOMAP
 	select GENERIC_IRQ_SHOW
+	select HAS_IOPORT if PCI || ISA || ATARI_ROM_ISA
 	select HAVE_ARCH_SECCOMP
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ASM_MODVERSIONS
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index cc88af6fa7a4..211f338d6235 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -21,6 +21,7 @@ config MICROBLAZE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_PCI_IOMAP
 	select GENERIC_SCHED_CLOCK
+	select HAS_IOPORT if PCI
 	select HAVE_ARCH_HASH
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_SECCOMP
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index e2f3ca73f40d..64760fcd7b52 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -47,6 +47,7 @@ config MIPS
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_TIME_VSYSCALL
 	select GUP_GET_PXX_LOW_HIGH if CPU_MIPS32 && PHYS_ADDR_T_64BIT
+	select HAS_IOPORT if !NO_IOPORT_MAP
 	select HAVE_ARCH_COMPILER_H
 	select HAVE_ARCH_JUMP_LABEL
 	select HAVE_ARCH_KGDB if MIPS_FP_SUPPORT
@@ -3120,6 +3121,7 @@ config PCI_DRIVERS_LEGACY
 # users to choose the right thing ...
 #
 config ISA
+	depends on HAS_IOPORT
 	bool
 
 config TC
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index a98940e64243..5eeacc72e4da 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -47,6 +47,7 @@ config PARISC
 	select MODULES_USE_ELF_RELA
 	select CLONE_BACKWARDS
 	select TTY # Needed for pdc_cons.c
+	select HAS_IOPORT if PCI
 	select HAVE_DEBUG_STACKOVERFLOW
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_HASH
@@ -131,6 +132,7 @@ config STACKTRACE_SUPPORT
 
 config ISA_DMA_API
 	bool
+	depends on HAS_IOPORT
 
 config ARCH_MAY_HAVE_PC_FDC
 	bool
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index a6c4407d3ec8..f7de646c074a 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -188,6 +188,7 @@ config PPC
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_TIME_VSYSCALL
 	select GENERIC_VDSO_TIME_NS
+	select HAS_IOPORT			if PCI
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_HUGE_VMALLOC		if HAVE_ARCH_HUGE_VMAP
 	select HAVE_ARCH_HUGE_VMAP		if PPC_RADIX_MMU || PPC_8xx
@@ -1070,7 +1071,6 @@ menu "Bus options"
 
 config ISA
 	bool "Support for ISA-bus hardware"
-	depends on PPC_CHRP
 	select PPC_I8259
 	help
 	  Find out whether you have ISA slots on your motherboard.  ISA is the
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index c5e42cc37604..b957d12a171b 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -74,6 +74,7 @@ config RISCV
 	select GENERIC_TIME_VSYSCALL if MMU && 64BIT
 	select GENERIC_VDSO_TIME_NS if HAVE_GENERIC_VDSO
 	select HARDIRQS_SW_RESEND
+	select HAS_IOPORT if MMU
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_HUGE_VMALLOC if HAVE_ARCH_HUGE_VMAP
 	select HAVE_ARCH_HUGE_VMAP if MMU && 64BIT && !XIP_KERNEL
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 0665ac0add0b..cfb797bc4200 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -25,6 +25,7 @@ config SUPERH
 	select GENERIC_SCHED_CLOCK
 	select GENERIC_SMP_IDLE_THREAD
 	select GUP_GET_PXX_LOW_HIGH if X2TLB
+	select HAS_IOPORT if HAS_IOPORT_MAP
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_SECCOMP_FILTER
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 84437a4c6545..d4c1d96f85cd 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -32,6 +32,7 @@ config SPARC
 	select GENERIC_IRQ_SHOW
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select GENERIC_PCI_IOMAP
+	select HAS_IOPORT
 	select HAVE_NMI_WATCHDOG if SPARC64
 	select HAVE_CBPF_JIT if SPARC32
 	select HAVE_EBPF_JIT if SPARC64
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index 541a9b18e343..452d268be2e8 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -56,6 +56,7 @@ config NO_IOPORT_MAP
 
 config ISA
 	bool
+	depends on HAS_IOPORT
 
 config SBUS
 	bool
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index a825bf031f49..634dd42532f3 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -162,6 +162,7 @@ config X86
 	select GUP_GET_PXX_LOW_HIGH		if X86_PAE
 	select HARDIRQS_SW_RESEND
 	select HARDLOCKUP_CHECK_TIMESTAMP	if X86_64
+	select HAS_IOPORT
 	select HAVE_ACPI_APEI			if ACPI
 	select HAVE_ACPI_APEI_NMI		if ACPI
 	select HAVE_ALIGNED_STRUCT_PAGE		if SLUB
@@ -2893,6 +2894,7 @@ if X86_32
 
 config ISA
 	bool "ISA support"
+	depends on HAS_IOPORT
 	help
 	  Find out whether you have ISA slots on your motherboard.  ISA is the
 	  name of a bus system, i.e. the way the CPU talks to the other stuff
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 7bfe998f3514..fcfa280df98a 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -81,7 +81,7 @@ config MOXTET
 config HISILICON_LPC
 	bool "Support for ISA I/O space on HiSilicon Hip06/7"
 	depends on (ARM64 && ARCH_HISI) || (COMPILE_TEST && !ALPHA && !HEXAGON && !PARISC)
-	depends on HAS_IOMEM
+	depends on HAS_IOPORT
 	select INDIRECT_PIO if ARM64
 	help
 	  Driver to enable I/O access to devices attached to the Low Pin
diff --git a/drivers/eisa/Kconfig b/drivers/eisa/Kconfig
index c8bbf90209f5..d3f62de72259 100644
--- a/drivers/eisa/Kconfig
+++ b/drivers/eisa/Kconfig
@@ -5,6 +5,7 @@
 
 config HAVE_EISA
 	bool
+	depends on HAS_IOPORT
 
 menuconfig EISA
 	bool "EISA support"
diff --git a/lib/Kconfig b/lib/Kconfig
index ce2abffb9ed8..5c2da561c516 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -92,6 +92,7 @@ config ARCH_USE_SYM_ANNOTATIONS
 config INDIRECT_PIO
 	bool "Access I/O in non-MMIO mode"
 	depends on ARM64
+	depends on HAS_IOPORT
 	help
 	  On some platforms where no separate I/O space exists, there are I/O
 	  hosts which can not be accessed in MMIO mode. Using the logical PIO
@@ -509,6 +510,9 @@ config HAS_IOMEM
 	depends on !NO_IOMEM
 	default y
 
+config HAS_IOPORT
+	bool
+
 config HAS_IOPORT_MAP
 	bool
 	depends on HAS_IOMEM && !NO_IOPORT_MAP
diff --git a/lib/Kconfig.kgdb b/lib/Kconfig.kgdb
index 3b9a44008433..c68e4d9dcecb 100644
--- a/lib/Kconfig.kgdb
+++ b/lib/Kconfig.kgdb
@@ -121,7 +121,8 @@ config KDB_DEFAULT_ENABLE
 
 config KDB_KEYBOARD
 	bool "KGDB_KDB: keyboard as input device"
-	depends on VT && KGDB_KDB && !PARISC
+	depends on HAS_IOPORT
+	depends on VT && KGDB_KDB
 	default n
 	help
 	  KDB can use a PS/2 type keyboard for an input device
-- 
2.37.2

[PATCH v3 02/38] ata: add HAS_IOPORT dependencies

[Niklas Schnelle]

In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.

Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
 drivers/ata/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index b56fba76b43f..e5e67bdc2dff 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -342,6 +342,7 @@ endif # HAS_DMA
 
 config ATA_SFF
 	bool "ATA SFF support (for legacy IDE and PATA)"
+	depends on HAS_IOPORT
 	default y
 	help
 	  This option adds support for ATA controllers with SFF
-- 
2.37.2

[PATCH v3 03/38] char: impi, tpm: depend on HAS_IOPORT

[Niklas Schnelle]

In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add this dependency and ifdef
sections of code using inb()/outb() as alternative access methods.

Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
 drivers/char/Kconfig             |  3 ++-
 drivers/char/ipmi/Makefile       | 11 ++++-------
 drivers/char/ipmi/ipmi_si_intf.c |  3 ++-
 drivers/char/ipmi/ipmi_si_pci.c  |  3 +++
 drivers/char/pcmcia/Kconfig      |  8 ++++----
 drivers/char/tpm/Kconfig         |  1 +
 drivers/char/tpm/tpm_infineon.c  | 14 ++++++++++----
 drivers/char/tpm/tpm_tis_core.c  | 19 ++++++++-----------
 8 files changed, 34 insertions(+), 28 deletions(-)

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 30fe9848dac1..c34679c6da70 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -34,6 +34,7 @@ config TTY_PRINTK_LEVEL
 config PRINTER
 	tristate "Parallel printer support"
 	depends on PARPORT
+	depends on HAS_IOPORT
 	help
 	  If you intend to attach a printer to the parallel port of your Linux
 	  box (as opposed to using a serial printer; if the connector at the
@@ -342,7 +343,7 @@ config NVRAM
 
 config DEVPORT
 	bool "/dev/port character device"
-	depends on ISA || PCI
+	depends on HAS_IOPORT
 	default y
 	help
 	  Say Y here if you want to support the /dev/port device. The /dev/port
diff --git a/drivers/char/ipmi/Makefile b/drivers/char/ipmi/Makefile
index cb6138b8ded9..e0944547c9d0 100644
--- a/drivers/char/ipmi/Makefile
+++ b/drivers/char/ipmi/Makefile
@@ -5,13 +5,10 @@
 
 ipmi_si-y := ipmi_si_intf.o ipmi_kcs_sm.o ipmi_smic_sm.o ipmi_bt_sm.o \
 	ipmi_si_hotmod.o ipmi_si_hardcode.o ipmi_si_platform.o \
-	ipmi_si_port_io.o ipmi_si_mem_io.o
-ifdef CONFIG_PCI
-ipmi_si-y += ipmi_si_pci.o
-endif
-ifdef CONFIG_PARISC
-ipmi_si-y += ipmi_si_parisc.o
-endif
+	ipmi_si_mem_io.o
+ipmi_si-$(CONFIG_HAS_IOPORT) += ipmi_si_port_io.o
+ipmi_si-$(CONFIG_PCI) += ipmi_si_pci.o
+ipmi_si-$(CONFIG_PARISC) += ipmi_si_parisc.o
 
 obj-$(CONFIG_IPMI_HANDLER) += ipmi_msghandler.o
 obj-$(CONFIG_IPMI_DEVICE_INTERFACE) += ipmi_devintf.o
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index abddd7e43a9a..edbbdb804913 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -1882,7 +1882,8 @@ int ipmi_si_add_smi(struct si_sm_io *io)
 	}
 
 	if (!io->io_setup) {
-		if (io->addr_space == IPMI_IO_ADDR_SPACE) {
+		if (IS_ENABLED(CONFIG_HAS_IOPORT) &&
+		    io->addr_space == IPMI_IO_ADDR_SPACE) {
 			io->io_setup = ipmi_si_port_setup;
 		} else if (io->addr_space == IPMI_MEM_ADDR_SPACE) {
 			io->io_setup = ipmi_si_mem_setup;
diff --git a/drivers/char/ipmi/ipmi_si_pci.c b/drivers/char/ipmi/ipmi_si_pci.c
index 74fa2055868b..b83d55685b22 100644
--- a/drivers/char/ipmi/ipmi_si_pci.c
+++ b/drivers/char/ipmi/ipmi_si_pci.c
@@ -97,6 +97,9 @@ static int ipmi_pci_probe(struct pci_dev *pdev,
 	}
 
 	if (pci_resource_flags(pdev, 0) & IORESOURCE_IO) {
+		if (!IS_ENABLED(CONFIG_HAS_IOPORT))
+			return -ENXIO;
+
 		io.addr_space = IPMI_IO_ADDR_SPACE;
 		io.io_setup = ipmi_si_port_setup;
 	} else {
diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig
index f5d589b2be44..788422627b43 100644
--- a/drivers/char/pcmcia/Kconfig
+++ b/drivers/char/pcmcia/Kconfig
@@ -8,7 +8,7 @@ menu "PCMCIA character devices"
 
 config SYNCLINK_CS
 	tristate "SyncLink PC Card support"
-	depends on PCMCIA && TTY
+	depends on PCMCIA && TTY && HAS_IOPORT
 	help
 	  Enable support for the SyncLink PC Card serial adapter, running
 	  asynchronous and HDLC communications up to 512Kbps. The port is
@@ -21,7 +21,7 @@ config SYNCLINK_CS
 
 config CARDMAN_4000
 	tristate "Omnikey Cardman 4000 support"
-	depends on PCMCIA
+	depends on PCMCIA && HAS_IOPORT
 	select BITREVERSE
 	help
 	  Enable support for the Omnikey Cardman 4000 PCMCIA Smartcard
@@ -33,7 +33,7 @@ config CARDMAN_4000
 
 config CARDMAN_4040
 	tristate "Omnikey CardMan 4040 support"
-	depends on PCMCIA
+	depends on PCMCIA && HAS_IOPORT
 	help
 	  Enable support for the Omnikey CardMan 4040 PCMCIA Smartcard
 	  reader.
@@ -57,7 +57,7 @@ config SCR24X
 
 config IPWIRELESS
 	tristate "IPWireless 3G UMTS PCMCIA card support"
-	depends on PCMCIA && NETDEVICES && TTY
+	depends on PCMCIA && NETDEVICES && TTY && HAS_IOPORT
 	select PPP
 	help
 	  This is a driver for 3G UMTS PCMCIA card from IPWireless company. In
diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
index 927088b2c3d3..418c9ed59ffd 100644
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -149,6 +149,7 @@ config TCG_NSC
 config TCG_ATMEL
 	tristate "Atmel TPM Interface"
 	depends on PPC64 || HAS_IOPORT_MAP
+	depends on HAS_IOPORT
 	help
 	  If you have a TPM security chip from Atmel say Yes and it 
 	  will be accessible from within Linux.  To compile this driver 
diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c
index 9c924a1440a9..2d2ae37153ba 100644
--- a/drivers/char/tpm/tpm_infineon.c
+++ b/drivers/char/tpm/tpm_infineon.c
@@ -51,34 +51,40 @@ static struct tpm_inf_dev tpm_dev;
 
 static inline void tpm_data_out(unsigned char data, unsigned char offset)
 {
+#ifdef CONFIG_HAS_IOPORT
 	if (tpm_dev.iotype == TPM_INF_IO_PORT)
 		outb(data, tpm_dev.data_regs + offset);
 	else
+#endif
 		writeb(data, tpm_dev.mem_base + tpm_dev.data_regs + offset);
 }
 
 static inline unsigned char tpm_data_in(unsigned char offset)
 {
+#ifdef CONFIG_HAS_IOPORT
 	if (tpm_dev.iotype == TPM_INF_IO_PORT)
 		return inb(tpm_dev.data_regs + offset);
-	else
-		return readb(tpm_dev.mem_base + tpm_dev.data_regs + offset);
+#endif
+	return readb(tpm_dev.mem_base + tpm_dev.data_regs + offset);
 }
 
 static inline void tpm_config_out(unsigned char data, unsigned char offset)
 {
+#ifdef CONFIG_HAS_IOPORT
 	if (tpm_dev.iotype == TPM_INF_IO_PORT)
 		outb(data, tpm_dev.config_port + offset);
 	else
+#endif
 		writeb(data, tpm_dev.mem_base + tpm_dev.index_off + offset);
 }
 
 static inline unsigned char tpm_config_in(unsigned char offset)
 {
+#ifdef CONFIG_HAS_IOPORT
 	if (tpm_dev.iotype == TPM_INF_IO_PORT)
 		return inb(tpm_dev.config_port + offset);
-	else
-		return readb(tpm_dev.mem_base + tpm_dev.index_off + offset);
+#endif
+	return readb(tpm_dev.mem_base + tpm_dev.index_off + offset);
 }
 
 /* TPM header definitions */
diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index 3f98e587b3e8..e43d2a1da3ea 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -897,11 +897,6 @@ static void tpm_tis_clkrun_enable(struct tpm_chip *chip, bool value)
 		clkrun_val &= ~LPC_CLKRUN_EN;
 		iowrite32(clkrun_val, data->ilb_base_addr + LPC_CNTRL_OFFSET);
 
-		/*
-		 * Write any random value on port 0x80 which is on LPC, to make
-		 * sure LPC clock is running before sending any TPM command.
-		 */
-		outb(0xCC, 0x80);
 	} else {
 		data->clkrun_enabled--;
 		if (data->clkrun_enabled)
@@ -912,13 +907,15 @@ static void tpm_tis_clkrun_enable(struct tpm_chip *chip, bool value)
 		/* Enable LPC CLKRUN# */
 		clkrun_val |= LPC_CLKRUN_EN;
 		iowrite32(clkrun_val, data->ilb_base_addr + LPC_CNTRL_OFFSET);
-
-		/*
-		 * Write any random value on port 0x80 which is on LPC, to make
-		 * sure LPC clock is running before sending any TPM command.
-		 */
-		outb(0xCC, 0x80);
 	}
+
+#ifdef CONFIG_HAS_IOPORT
+	/*
+	 * Write any random value on port 0x80 which is on LPC, to make
+	 * sure LPC clock is running before sending any TPM command.
+	 */
+	outb(0xCC, 0x80);
+#endif
 }
 
 static const struct tpm_class_ops tpm_tis = {
-- 
2.37.2

[PATCH v3 04/38] comedi: add HAS_IOPORT dependencies

[Niklas Schnelle]

In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.

Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
 drivers/comedi/Kconfig | 103 +++++++++++++++++++++++++++--------------
 1 file changed, 68 insertions(+), 35 deletions(-)

diff --git a/drivers/comedi/Kconfig b/drivers/comedi/Kconfig
index 9af280735cba..7a8d402f05be 100644
--- a/drivers/comedi/Kconfig
+++ b/drivers/comedi/Kconfig
@@ -67,6 +67,7 @@ config COMEDI_TEST
 
 config COMEDI_PARPORT
 	tristate "Parallel port support"
+	depends on HAS_IOPORT
 	help
 	  Enable support for the standard parallel port.
 	  A cheap and easy way to get a few more digital I/O lines. Steal
@@ -79,6 +80,7 @@ config COMEDI_PARPORT
 config COMEDI_SSV_DNP
 	tristate "SSV Embedded Systems DIL/Net-PC support"
 	depends on X86_32 || COMPILE_TEST
+	depends on HAS_IOPORT
 	help
 	  Enable support for SSV Embedded Systems DIL/Net-PC
 
@@ -89,6 +91,7 @@ endif # COMEDI_MISC_DRIVERS
 
 menuconfig COMEDI_ISA_DRIVERS
 	bool "Comedi ISA and PC/104 drivers"
+	depends on ISA
 	help
 	  Enable comedi ISA and PC/104 drivers to be built
 
@@ -100,7 +103,8 @@ if COMEDI_ISA_DRIVERS
 
 config COMEDI_PCL711
 	tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support"
-	select COMEDI_8254
+	depends on HAS_IOPORT
+	depends on COMEDI_8254
 	help
 	  Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112
 
@@ -161,8 +165,9 @@ config COMEDI_PCL730
 
 config COMEDI_PCL812
 	tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
+	depends on HAS_IOPORT
 	select COMEDI_ISADMA if ISA_DMA_API
-	select COMEDI_8254
+	depends on COMEDI_8254
 	help
 	  Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
 	  ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA,
@@ -173,8 +178,9 @@ config COMEDI_PCL812
 
 config COMEDI_PCL816
 	tristate "Advantech PCL-814 and PCL-816 ISA card support"
+	depends on HAS_IOPORT
 	select COMEDI_ISADMA if ISA_DMA_API
-	select COMEDI_8254
+	depends on COMEDI_8254
 	help
 	  Enable support for Advantech PCL-814 and PCL-816 ISA cards
 
@@ -183,8 +189,9 @@ config COMEDI_PCL816
 
 config COMEDI_PCL818
 	tristate "Advantech PCL-718 and PCL-818 ISA card support"
+	depends on HAS_IOPORT
 	select COMEDI_ISADMA if ISA_DMA_API
-	select COMEDI_8254
+	depends on COMEDI_8254
 	help
 	  Enable support for Advantech PCL-818 ISA cards
 	  PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718
@@ -203,7 +210,7 @@ config COMEDI_PCM3724
 
 config COMEDI_AMPLC_DIO200_ISA
 	tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E"
-	select COMEDI_AMPLC_DIO200
+	depends on COMEDI_AMPLC_DIO200
 	help
 	  Enable support for Amplicon PC212E, PC214E, PC215E, PC218E and
 	  PC272E ISA DIO boards
@@ -255,7 +262,8 @@ config COMEDI_DAC02
 
 config COMEDI_DAS16M1
 	tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support"
-	select COMEDI_8254
+	depends on HAS_IOPORT
+	depends on COMEDI_8254
 	select COMEDI_8255
 	help
 	  Enable support for Measurement Computing CIO-DAS16/M1 ISA cards.
@@ -265,7 +273,7 @@ config COMEDI_DAS16M1
 
 config COMEDI_DAS08_ISA
 	tristate "DAS-08 compatible ISA and PC/104 card support"
-	select COMEDI_DAS08
+	depends on COMEDI_DAS08
 	help
 	  Enable support for Keithley Metrabyte/ComputerBoards DAS08
 	  and compatible ISA and PC/104 cards:
@@ -278,8 +286,9 @@ config COMEDI_DAS08_ISA
 
 config COMEDI_DAS16
 	tristate "DAS-16 compatible ISA and PC/104 card support"
+	depends on HAS_IOPORT
 	select COMEDI_ISADMA if ISA_DMA_API
-	select COMEDI_8254
+	depends on COMEDI_8254
 	select COMEDI_8255
 	help
 	  Enable support for Keithley Metrabyte/ComputerBoards DAS16
@@ -296,7 +305,8 @@ config COMEDI_DAS16
 
 config COMEDI_DAS800
 	tristate "DAS800 and compatible ISA card support"
-	select COMEDI_8254
+	depends on HAS_IOPORT
+	depends on COMEDI_8254
 	help
 	  Enable support for Keithley Metrabyte DAS800 and compatible ISA cards
 	  Keithley Metrabyte DAS-800, DAS-801, DAS-802
@@ -308,8 +318,9 @@ config COMEDI_DAS800
 
 config COMEDI_DAS1800
 	tristate "DAS1800 and compatible ISA card support"
+	depends on HAS_IOPORT
 	select COMEDI_ISADMA if ISA_DMA_API
-	select COMEDI_8254
+	depends on COMEDI_8254
 	help
 	  Enable support for DAS1800 and compatible ISA cards
 	  Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO,
@@ -323,7 +334,8 @@ config COMEDI_DAS1800
 
 config COMEDI_DAS6402
 	tristate "DAS6402 and compatible ISA card support"
-	select COMEDI_8254
+	depends on HAS_IOPORT
+	depends on COMEDI_8254
 	help
 	  Enable support for DAS6402 and compatible ISA cards
 	  Computerboards, Keithley Metrabyte DAS6402 and compatibles
@@ -402,7 +414,8 @@ config COMEDI_FL512
 
 config COMEDI_AIO_AIO12_8
 	tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support"
-	select COMEDI_8254
+	depends on HAS_IOPORT
+	depends on COMEDI_8254
 	select COMEDI_8255
 	help
 	  Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board
@@ -456,8 +469,9 @@ config COMEDI_ADQ12B
 
 config COMEDI_NI_AT_A2150
 	tristate "NI AT-A2150 ISA card support"
+	depends on HAS_IOPORT
 	select COMEDI_ISADMA if ISA_DMA_API
-	select COMEDI_8254
+	depends on COMEDI_8254
 	help
 	  Enable support for National Instruments AT-A2150 cards
 
@@ -466,7 +480,8 @@ config COMEDI_NI_AT_A2150
 
 config COMEDI_NI_AT_AO
 	tristate "NI AT-AO-6/10 EISA card support"
-	select COMEDI_8254
+	depends on HAS_IOPORT
+	depends on COMEDI_8254
 	help
 	  Enable support for National Instruments AT-AO-6/10 cards
 
@@ -497,7 +512,7 @@ config COMEDI_NI_ATMIO16D
 
 config COMEDI_NI_LABPC_ISA
 	tristate "NI Lab-PC and compatibles ISA support"
-	select COMEDI_NI_LABPC
+	depends on COMEDI_NI_LABPC
 	help
 	  Enable support for National Instruments Lab-PC and compatibles
 	  Lab-PC-1200, Lab-PC-1200AI, Lab-PC+.
@@ -561,7 +576,7 @@ endif # COMEDI_ISA_DRIVERS
 
 menuconfig COMEDI_PCI_DRIVERS
 	tristate "Comedi PCI drivers"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  Enable support for comedi PCI drivers.
 
@@ -710,7 +725,8 @@ config COMEDI_ADL_PCI8164
 
 config COMEDI_ADL_PCI9111
 	tristate "ADLink PCI-9111HR support"
-	select COMEDI_8254
+	depends on HAS_IOPORT
+	depends on COMEDI_8254
 	help
 	  Enable support for ADlink PCI9111 cards
 
@@ -720,7 +736,7 @@ config COMEDI_ADL_PCI9111
 config COMEDI_ADL_PCI9118
 	tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
 	depends on HAS_DMA
-	select COMEDI_8254
+	depends on COMEDI_8254
 	help
 	  Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
 
@@ -729,7 +745,8 @@ config COMEDI_ADL_PCI9118
 
 config COMEDI_ADV_PCI1710
 	tristate "Advantech PCI-171x and PCI-1731 support"
-	select COMEDI_8254
+	depends on HAS_IOPORT
+	depends on COMEDI_8254
 	help
 	  Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711,
 	  PCI-1713 and PCI-1731
@@ -773,7 +790,8 @@ config COMEDI_ADV_PCI1760
 
 config COMEDI_ADV_PCI_DIO
 	tristate "Advantech PCI DIO card support"
-	select COMEDI_8254
+	depends on HAS_IOPORT
+	depends on COMEDI_8254
 	select COMEDI_8255
 	help
 	  Enable support for Advantech PCI DIO cards
@@ -786,7 +804,7 @@ config COMEDI_ADV_PCI_DIO
 
 config COMEDI_AMPLC_DIO200_PCI
 	tristate "Amplicon PCI215/PCI272/PCIe215/PCIe236/PCIe296 DIO support"
-	select COMEDI_AMPLC_DIO200
+	depends on COMEDI_AMPLC_DIO200
 	help
 	  Enable support for Amplicon PCI215, PCI272, PCIe215, PCIe236
 	  and PCIe296 DIO boards.
@@ -814,7 +832,8 @@ config COMEDI_AMPLC_PC263_PCI
 
 config COMEDI_AMPLC_PCI224
 	tristate "Amplicon PCI224 and PCI234 support"
-	select COMEDI_8254
+	depends on HAS_IOPORT
+	depends on COMEDI_8254
 	help
 	  Enable support for Amplicon PCI224 and PCI234 AO boards
 
@@ -823,7 +842,8 @@ config COMEDI_AMPLC_PCI224
 
 config COMEDI_AMPLC_PCI230
 	tristate "Amplicon PCI230 and PCI260 support"
-	select COMEDI_8254
+	depends on HAS_IOPORT
+	depends on COMEDI_8254
 	select COMEDI_8255
 	help
 	  Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
@@ -842,7 +862,7 @@ config COMEDI_CONTEC_PCI_DIO
 
 config COMEDI_DAS08_PCI
 	tristate "DAS-08 PCI support"
-	select COMEDI_DAS08
+	depends on COMEDI_DAS08
 	help
 	  Enable support for PCI DAS-08 cards.
 
@@ -929,7 +949,8 @@ config COMEDI_CB_PCIDAS64
 
 config COMEDI_CB_PCIDAS
 	tristate "MeasurementComputing PCI-DAS support"
-	select COMEDI_8254
+	depends on HAS_IOPORT
+	depends on COMEDI_8254
 	select COMEDI_8255
 	help
 	  Enable support for ComputerBoards/MeasurementComputing PCI-DAS with
@@ -953,7 +974,8 @@ config COMEDI_CB_PCIDDA
 
 config COMEDI_CB_PCIMDAS
 	tristate "MeasurementComputing PCIM-DAS1602/16, PCIe-DAS1602/16 support"
-	select COMEDI_8254
+	depends on HAS_IOPORT
+	depends on COMEDI_8254
 	select COMEDI_8255
 	help
 	  Enable support for ComputerBoards/MeasurementComputing PCI Migration
@@ -973,7 +995,8 @@ config COMEDI_CB_PCIMDDA
 
 config COMEDI_ME4000
 	tristate "Meilhaus ME-4000 support"
-	select COMEDI_8254
+	depends on HAS_IOPORT
+	depends on COMEDI_8254
 	help
 	  Enable support for Meilhaus PCI data acquisition cards
 	  ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is
@@ -1031,7 +1054,7 @@ config COMEDI_NI_670X
 
 config COMEDI_NI_LABPC_PCI
 	tristate "NI Lab-PC PCI-1200 support"
-	select COMEDI_NI_LABPC
+	depends on COMEDI_NI_LABPC
 	help
 	  Enable support for National Instruments Lab-PC PCI-1200.
 
@@ -1053,6 +1076,7 @@ config COMEDI_NI_PCIDIO
 config COMEDI_NI_PCIMIO
 	tristate "NI PCI-MIO-E series and M series support"
 	depends on HAS_DMA
+	depends on HAS_IOPORT
 	select COMEDI_NI_TIOCMD
 	select COMEDI_8255
 	help
@@ -1074,7 +1098,8 @@ config COMEDI_NI_PCIMIO
 
 config COMEDI_RTD520
 	tristate "Real Time Devices PCI4520/DM7520 support"
-	select COMEDI_8254
+	depends on HAS_IOPORT
+	depends on COMEDI_8254
 	help
 	  Enable support for Real Time Devices PCI4520/DM7520
 
@@ -1114,7 +1139,8 @@ if COMEDI_PCMCIA_DRIVERS
 
 config COMEDI_CB_DAS16_CS
 	tristate "CB DAS16 series PCMCIA support"
-	select COMEDI_8254
+	depends on HAS_IOPORT
+	depends on COMEDI_8254
 	help
 	  Enable support for the ComputerBoards/MeasurementComputing PCMCIA
 	  cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16
@@ -1124,7 +1150,7 @@ config COMEDI_CB_DAS16_CS
 
 config COMEDI_DAS08_CS
 	tristate "CB DAS08 PCMCIA support"
-	select COMEDI_DAS08
+	depends on COMEDI_DAS08
 	help
 	  Enable support for the ComputerBoards/MeasurementComputing DAS-08
 	  PCMCIA card
@@ -1134,6 +1160,7 @@ config COMEDI_DAS08_CS
 
 config COMEDI_NI_DAQ_700_CS
 	tristate "NI DAQCard-700 PCMCIA support"
+	depends on HAS_IOPORT
 	help
 	  Enable support for the National Instruments PCMCIA DAQCard-700 DIO
 
@@ -1142,6 +1169,7 @@ config COMEDI_NI_DAQ_700_CS
 
 config COMEDI_NI_DAQ_DIO24_CS
 	tristate "NI DAQ-Card DIO-24 PCMCIA support"
+	depends on HAS_IOPORT
 	select COMEDI_8255
 	help
 	  Enable support for the National Instruments PCMCIA DAQ-Card DIO-24
@@ -1151,7 +1179,7 @@ config COMEDI_NI_DAQ_DIO24_CS
 
 config COMEDI_NI_LABPC_CS
 	tristate "NI DAQCard-1200 PCMCIA support"
-	select COMEDI_NI_LABPC
+	depends on COMEDI_NI_LABPC
 	help
 	  Enable support for the National Instruments PCMCIA DAQCard-1200
 
@@ -1160,6 +1188,7 @@ config COMEDI_NI_LABPC_CS
 
 config COMEDI_NI_MIO_CS
 	tristate "NI DAQCard E series PCMCIA support"
+	depends on HAS_IOPORT
 	select COMEDI_NI_TIO
 	select COMEDI_8255
 	help
@@ -1172,6 +1201,7 @@ config COMEDI_NI_MIO_CS
 
 config COMEDI_QUATECH_DAQP_CS
 	tristate "Quatech DAQP PCMCIA data capture card support"
+	depends on HAS_IOPORT
 	help
 	  Enable support for the Quatech DAQP PCMCIA data capture cards
 	  DAQP-208 and DAQP-308
@@ -1248,12 +1278,14 @@ endif # COMEDI_USB_DRIVERS
 
 config COMEDI_8254
 	tristate
+	depends on HAS_IOPORT
 
 config COMEDI_8255
 	tristate
 
 config COMEDI_8255_SA
 	tristate "Standalone 8255 support"
+	depends on HAS_IOPORT
 	select COMEDI_8255
 	help
 	  Enable support for 8255 digital I/O as a standalone driver.
@@ -1285,7 +1317,7 @@ config COMEDI_KCOMEDILIB
 	  called kcomedilib.
 
 config COMEDI_AMPLC_DIO200
-	select COMEDI_8254
+	depends on COMEDI_8254
 	tristate
 
 config COMEDI_AMPLC_PC236
@@ -1294,7 +1326,7 @@ config COMEDI_AMPLC_PC236
 
 config COMEDI_DAS08
 	tristate
-	select COMEDI_8254
+	depends on COMEDI_8254
 	select COMEDI_8255
 
 config COMEDI_ISADMA
@@ -1302,7 +1334,8 @@ config COMEDI_ISADMA
 
 config COMEDI_NI_LABPC
 	tristate
-	select COMEDI_8254
+	depends on HAS_IOPORT
+	depends on COMEDI_8254
 	select COMEDI_8255
 
 config COMEDI_NI_LABPC_ISADMA
-- 
2.37.2

[PATCH v3 05/38] counter: add HAS_IOPORT dependencies

[Niklas Schnelle]

In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.

Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
 drivers/counter/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/counter/Kconfig b/drivers/counter/Kconfig
index b5ba8fb02cf7..1cae5097217e 100644
--- a/drivers/counter/Kconfig
+++ b/drivers/counter/Kconfig
@@ -15,6 +15,7 @@ if COUNTER
 config 104_QUAD_8
 	tristate "ACCES 104-QUAD-8 driver"
 	depends on (PC104 && X86) || COMPILE_TEST
+	depends on HAS_IOPORT
 	select ISA_BUS_API
 	help
 	  Say yes here to build support for the ACCES 104-QUAD-8 quadrature
-- 
2.37.2

[PATCH v3 06/38] /dev/port: don't compile file operations without CONFIG_DEVPORT

[Niklas Schnelle]

In the future inb() and friends will not be available when compiling
with CONFIG_HAS_IOPORT=n so we must only try to access them here if
CONFIG_DEVPORT is set which depends on HAS_IOPORT.

Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
 drivers/char/mem.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index ffb101d349f0..d7fcf85b4df9 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -402,6 +402,7 @@ static int mmap_mem(struct file *file, struct vm_area_struct *vma)
 	return 0;
 }
 
+#ifdef CONFIG_DEVPORT
 static ssize_t read_port(struct file *file, char __user *buf,
 			 size_t count, loff_t *ppos)
 {
@@ -443,6 +444,7 @@ static ssize_t write_port(struct file *file, const char __user *buf,
 	*ppos = i;
 	return tmp-buf;
 }
+#endif
 
 static ssize_t read_null(struct file *file, char __user *buf,
 			 size_t count, loff_t *ppos)
@@ -671,12 +673,14 @@ static const struct file_operations null_fops = {
 	.uring_cmd	= uring_cmd_null,
 };
 
-static const struct file_operations __maybe_unused port_fops = {
+#ifdef CONFIG_DEVPORT
+static const struct file_operations port_fops = {
 	.llseek		= memory_lseek,
 	.read		= read_port,
 	.write		= write_port,
 	.open		= open_port,
 };
+#endif
 
 static const struct file_operations zero_fops = {
 	.llseek		= zero_lseek,
-- 
2.37.2

[PATCH v3 07/38] drm: handle HAS_IOPORT dependencies

[Niklas Schnelle]

In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them. In the bochs driver there is optional MMIO
support detected at runtime, warn if this isn't taken when
HAS_IOPORT is not defined.

There is also a direct and hard coded use in cirrus.c which according to
the comment is only necessary during resume.  Let's just skip this as
for example s390 which doesn't have I/O port support also doesen't
support suspend/resume.

Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
 drivers/gpu/drm/qxl/Kconfig   |  1 +
 drivers/gpu/drm/tiny/bochs.c  | 19 +++++++++++++++++++
 drivers/gpu/drm/tiny/cirrus.c |  2 ++
 3 files changed, 22 insertions(+)

diff --git a/drivers/gpu/drm/qxl/Kconfig b/drivers/gpu/drm/qxl/Kconfig
index ca3f51c2a8fe..d0e0d440c8d9 100644
--- a/drivers/gpu/drm/qxl/Kconfig
+++ b/drivers/gpu/drm/qxl/Kconfig
@@ -2,6 +2,7 @@
 config DRM_QXL
 	tristate "QXL virtual GPU"
 	depends on DRM && PCI && MMU
+	depends on HAS_IOPORT
 	select DRM_KMS_HELPER
 	select DRM_TTM
 	select DRM_TTM_HELPER
diff --git a/drivers/gpu/drm/tiny/bochs.c b/drivers/gpu/drm/tiny/bochs.c
index 024346054c70..da4a5d53b003 100644
--- a/drivers/gpu/drm/tiny/bochs.c
+++ b/drivers/gpu/drm/tiny/bochs.c
@@ -2,6 +2,7 @@
 
 #include <linux/module.h>
 #include <linux/pci.h>
+#include <asm/bug.h>
 
 #include <drm/drm_aperture.h>
 #include <drm/drm_atomic_helper.h>
@@ -105,7 +106,11 @@ static void bochs_vga_writeb(struct bochs_device *bochs, u16 ioport, u8 val)
 
 		writeb(val, bochs->mmio + offset);
 	} else {
+#ifdef HAS_IOPORT
 		outb(val, ioport);
+#else
+		WARN_ONCE(1, "Non-MMIO bochs device needs HAS_IOPORT");
+#endif
 	}
 }
 
@@ -119,7 +124,12 @@ static u8 bochs_vga_readb(struct bochs_device *bochs, u16 ioport)
 
 		return readb(bochs->mmio + offset);
 	} else {
+#ifdef HAS_IOPORT
 		return inb(ioport);
+#else
+		WARN_ONCE(1, "Non-MMIO bochs device needs HAS_IOPORT");
+		return 0xff;
+#endif
 	}
 }
 
@@ -132,8 +142,13 @@ static u16 bochs_dispi_read(struct bochs_device *bochs, u16 reg)
 
 		ret = readw(bochs->mmio + offset);
 	} else {
+#ifdef HAS_IOPORT
 		outw(reg, VBE_DISPI_IOPORT_INDEX);
 		ret = inw(VBE_DISPI_IOPORT_DATA);
+#else
+		WARN_ONCE(1, "Non-MMIO bochs device needs HAS_IOPORT");
+		ret = 0xffff;
+#endif
 	}
 	return ret;
 }
@@ -145,8 +160,12 @@ static void bochs_dispi_write(struct bochs_device *bochs, u16 reg, u16 val)
 
 		writew(val, bochs->mmio + offset);
 	} else {
+#ifdef HAS_IOPORT
 		outw(reg, VBE_DISPI_IOPORT_INDEX);
 		outw(val, VBE_DISPI_IOPORT_DATA);
+#else
+		WARN_ONCE(1, "Non-MMIO bochs device needs HAS_IOPORT");
+#endif
 	}
 }
 
diff --git a/drivers/gpu/drm/tiny/cirrus.c b/drivers/gpu/drm/tiny/cirrus.c
index accfa52e78c5..9da89732c5ac 100644
--- a/drivers/gpu/drm/tiny/cirrus.c
+++ b/drivers/gpu/drm/tiny/cirrus.c
@@ -308,8 +308,10 @@ static int cirrus_mode_set(struct cirrus_device *cirrus,
 
 	cirrus_set_start_address(cirrus, 0);
 
+#ifdef CONFIG_HAS_IOPORT
 	/* Unblank (needed on S3 resume, vgabios doesn't do it then) */
 	outb(0x20, 0x3c0);
+#endif
 
 	drm_dev_exit(idx);
 	return 0;
-- 
2.37.2

[PATCH v3 08/38] firmware: dmi-sysfs: handle HAS_IOPORT=n

[Niklas Schnelle]

In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to guard sections of code calling them
as alternative access methods.

Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
 drivers/firmware/dmi-sysfs.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/firmware/dmi-sysfs.c b/drivers/firmware/dmi-sysfs.c
index ed5aff0a4204..22ca1af4e363 100644
--- a/drivers/firmware/dmi-sysfs.c
+++ b/drivers/firmware/dmi-sysfs.c
@@ -310,6 +310,7 @@ static struct kobj_type dmi_system_event_log_ktype = {
 	.default_groups = dmi_sysfs_sel_groups,
 };
 
+#ifdef CONFIG_HAS_IOPORT
 typedef u8 (*sel_io_reader)(const struct dmi_system_event_log *sel,
 			    loff_t offset);
 
@@ -374,6 +375,7 @@ static ssize_t dmi_sel_raw_read_io(struct dmi_sysfs_entry *entry,
 
 	return wrote;
 }
+#endif
 
 static ssize_t dmi_sel_raw_read_phys32(struct dmi_sysfs_entry *entry,
 				       const struct dmi_system_event_log *sel,
@@ -409,11 +411,13 @@ static ssize_t dmi_sel_raw_read_helper(struct dmi_sysfs_entry *entry,
 	memcpy(&sel, dh, sizeof(sel));
 
 	switch (sel.access_method) {
+#ifdef CONFIG_HAS_IOPORT
 	case DMI_SEL_ACCESS_METHOD_IO8:
 	case DMI_SEL_ACCESS_METHOD_IO2x8:
 	case DMI_SEL_ACCESS_METHOD_IO16:
 		return dmi_sel_raw_read_io(entry, &sel, state->buf,
 					   state->pos, state->count);
+#endif
 	case DMI_SEL_ACCESS_METHOD_PHYS32:
 		return dmi_sel_raw_read_phys32(entry, &sel, state->buf,
 					       state->pos, state->count);
-- 
2.37.2

[PATCH v3 09/38] gpio: add HAS_IOPORT dependencies

[Niklas Schnelle]

In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.

Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
 drivers/gpio/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 13be729710f2..5a874e67fc13 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -688,7 +688,7 @@ config GPIO_VISCONTI
 
 config GPIO_VX855
 	tristate "VIA VX855/VX875 GPIO"
-	depends on (X86 || COMPILE_TEST) && PCI
+	depends on (X86 || COMPILE_TEST) && PCI && HAS_IOPORT
 	select MFD_CORE
 	select MFD_VX855
 	help
-- 
2.37.2

[PATCH v3 10/38] hwmon: add HAS_IOPORT dependencies

[Niklas Schnelle]

In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.

Acked-by: Guenter Roeck <linux@roeck-us.net>
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
 drivers/hwmon/Kconfig | 21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 5b3b76477b0e..35afb070cae2 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -578,6 +578,7 @@ config SENSORS_SPARX5
 
 config SENSORS_F71805F
 	tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
+	depends on HAS_IOPORT
 	depends on !PPC
 	help
 	  If you say yes here you get support for hardware monitoring
@@ -589,6 +590,7 @@ config SENSORS_F71805F
 
 config SENSORS_F71882FG
 	tristate "Fintek F71882FG and compatibles"
+	depends on HAS_IOPORT
 	depends on !PPC
 	help
 	  If you say yes here you get support for hardware monitoring
@@ -801,6 +803,7 @@ config SENSORS_CORETEMP
 
 config SENSORS_IT87
 	tristate "ITE IT87xx and compatibles"
+	depends on HAS_IOPORT
 	depends on !PPC
 	select HWMON_VID
 	help
@@ -1465,6 +1468,7 @@ config SENSORS_LM95245
 
 config SENSORS_PC87360
 	tristate "National Semiconductor PC87360 family"
+	depends on HAS_IOPORT
 	depends on !PPC
 	select HWMON_VID
 	help
@@ -1479,6 +1483,7 @@ config SENSORS_PC87360
 
 config SENSORS_PC87427
 	tristate "National Semiconductor PC87427"
+	depends on HAS_IOPORT
 	depends on !PPC
 	help
 	  If you say yes here you get access to the hardware monitoring
@@ -1510,6 +1515,7 @@ config SENSORS_NTC_THERMISTOR
 
 config SENSORS_NCT6683
 	tristate "Nuvoton NCT6683D"
+	depends on HAS_IOPORT
 	depends on !PPC
 	help
 	  If you say yes here you get support for the hardware monitoring
@@ -1531,6 +1537,7 @@ config SENSORS_NCT6775_CORE
 
 config SENSORS_NCT6775
 	tristate "Platform driver for Nuvoton NCT6775F and compatibles"
+	depends on HAS_IOPORT
 	depends on !PPC
 	depends on ACPI || ACPI=n
 	select HWMON_VID
@@ -1767,7 +1774,7 @@ config SENSORS_SHTC1
 
 config SENSORS_SIS5595
 	tristate "Silicon Integrated Systems Corp. SiS5595"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes here you get support for the integrated sensors in
 	  SiS5595 South Bridges.
@@ -1787,6 +1794,7 @@ config SENSORS_SY7636A
 
 config SENSORS_DME1737
 	tristate "SMSC DME1737, SCH311x and compatibles"
+	depends on HAS_IOPORT
 	depends on I2C && !PPC
 	select HWMON_VID
 	help
@@ -1843,6 +1851,7 @@ config SENSORS_EMC6W201
 
 config SENSORS_SMSC47M1
 	tristate "SMSC LPC47M10x and compatibles"
+	depends on HAS_IOPORT
 	depends on !PPC
 	help
 	  If you say yes here you get support for the integrated fan
@@ -1877,6 +1886,7 @@ config SENSORS_SMSC47M192
 
 config SENSORS_SMSC47B397
 	tristate "SMSC LPC47B397-NC"
+	depends on HAS_IOPORT
 	depends on !PPC
 	help
 	  If you say yes here you get support for the SMSC LPC47B397-NC
@@ -1890,6 +1900,7 @@ config SENSORS_SCH56XX_COMMON
 
 config SENSORS_SCH5627
 	tristate "SMSC SCH5627"
+	depends on HAS_IOPORT
 	depends on !PPC && WATCHDOG
 	select SENSORS_SCH56XX_COMMON
 	select WATCHDOG_CORE
@@ -1903,6 +1914,7 @@ config SENSORS_SCH5627
 
 config SENSORS_SCH5636
 	tristate "SMSC SCH5636"
+	depends on HAS_IOPORT
 	depends on !PPC && WATCHDOG
 	select SENSORS_SCH56XX_COMMON
 	select WATCHDOG_CORE
@@ -2145,7 +2157,7 @@ config SENSORS_VIA_CPUTEMP
 
 config SENSORS_VIA686A
 	tristate "VIA686A"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes here you get support for the integrated sensors in
 	  Via 686A/B South Bridges.
@@ -2155,6 +2167,7 @@ config SENSORS_VIA686A
 
 config SENSORS_VT1211
 	tristate "VIA VT1211"
+	depends on HAS_IOPORT
 	depends on !PPC
 	select HWMON_VID
 	help
@@ -2166,7 +2179,7 @@ config SENSORS_VT1211
 
 config SENSORS_VT8231
 	tristate "VIA VT8231"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	select HWMON_VID
 	help
 	  If you say yes here then you get support for the integrated sensors
@@ -2274,6 +2287,7 @@ config SENSORS_W83L786NG
 
 config SENSORS_W83627HF
 	tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
+	depends on HAS_IOPORT
 	depends on !PPC
 	select HWMON_VID
 	help
@@ -2286,6 +2300,7 @@ config SENSORS_W83627HF
 
 config SENSORS_W83627EHF
 	tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG"
+	depends on HAS_IOPORT
 	depends on !PPC
 	select HWMON_VID
 	help
-- 
2.37.2

[PATCH v3 11/38] i2c: add HAS_IOPORT dependencies

[Niklas Schnelle]

In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.

Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
 drivers/i2c/busses/Kconfig | 31 +++++++++++++++++--------------
 1 file changed, 17 insertions(+), 14 deletions(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 25eb4e8fd22f..6c0b9ca25e32 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -18,7 +18,7 @@ config I2C_CCGX_UCSI
 
 config I2C_ALI1535
 	tristate "ALI 1535"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the SMB
 	  Host controller on Acer Labs Inc. (ALI) M1535 South Bridges.  The SMB
@@ -30,7 +30,7 @@ config I2C_ALI1535
 
 config I2C_ALI1563
 	tristate "ALI 1563"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the SMB
 	  Host controller on Acer Labs Inc. (ALI) M1563 South Bridges.  The SMB
@@ -42,7 +42,7 @@ config I2C_ALI1563
 
 config I2C_ALI15X3
 	tristate "ALI 15x3"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the
 	  Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces.
@@ -52,7 +52,7 @@ config I2C_ALI15X3
 
 config I2C_AMD756
 	tristate "AMD 756/766/768/8111 and nVidia nForce"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the AMD
 	  756/766/768 mainboard I2C interfaces.  The driver also includes
@@ -77,7 +77,7 @@ config I2C_AMD756_S4882
 
 config I2C_AMD8111
 	tristate "AMD 8111"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the
 	  second (SMBus 2.0) AMD 8111 mainboard I2C interface.
@@ -107,7 +107,7 @@ config I2C_HIX5HD2
 
 config I2C_I801
 	tristate "Intel 82801 (ICH/PCH)"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	select P2SB if X86
 	select CHECK_SIGNATURE if X86 && DMI
 	select I2C_SMBUS
@@ -164,7 +164,7 @@ config I2C_I801
 
 config I2C_ISCH
 	tristate "Intel SCH SMBus 1.0"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	select LPC_SCH
 	help
 	  Say Y here if you want to use SMBus controller on the Intel SCH
@@ -185,7 +185,7 @@ config I2C_ISMT
 
 config I2C_PIIX4
 	tristate "Intel PIIX4 and compatible (ATI/AMD/Serverworks/Broadcom/SMSC)"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the Intel
 	  PIIX4 family of mainboard I2C interfaces.  Specifically, the following
@@ -231,7 +231,7 @@ config I2C_CHT_WC
 
 config I2C_NFORCE2
 	tristate "Nvidia nForce2, nForce3 and nForce4"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the Nvidia
 	  nForce2, nForce3 and nForce4 families of mainboard I2C interfaces.
@@ -264,7 +264,7 @@ config I2C_NVIDIA_GPU
 
 config I2C_SIS5595
 	tristate "SiS 5595"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the
 	  SiS5595 SMBus (a subset of I2C) interface.
@@ -274,7 +274,7 @@ config I2C_SIS5595
 
 config I2C_SIS630
 	tristate "SiS 630/730/964"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the
 	  SiS630, SiS730 and SiS964 SMBus (a subset of I2C) interface.
@@ -284,7 +284,7 @@ config I2C_SIS630
 
 config I2C_SIS96X
 	tristate "SiS 96x"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the SiS
 	  96x SMBus (a subset of I2C) interfaces.  Specifically, the following
@@ -302,7 +302,7 @@ config I2C_SIS96X
 
 config I2C_VIA
 	tristate "VIA VT82C586B"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	select I2C_ALGOBIT
 	help
 	  If you say yes to this option, support will be included for the VIA
@@ -313,7 +313,7 @@ config I2C_VIA
 
 config I2C_VIAPRO
 	tristate "VIA VT82C596/82C686/82xx and CX700/VX8xx/VX900"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the VIA
 	  VT82C596 and later SMBus interface.  Specifically, the following
@@ -881,6 +881,7 @@ config I2C_NPCM
 
 config I2C_OCORES
 	tristate "OpenCores I2C Controller"
+	depends on HAS_IOPORT
 	help
 	  If you say yes to this option, support will be included for the
 	  OpenCores I2C controller. For details see
@@ -1274,6 +1275,7 @@ config I2C_CP2615
 config I2C_PARPORT
 	tristate "Parallel port adapter"
 	depends on PARPORT
+	depends on HAS_IOPORT
 	select I2C_ALGOBIT
 	select I2C_SMBUS
 	help
@@ -1382,6 +1384,7 @@ config I2C_ICY
 config I2C_MLXCPLD
 	tristate "Mellanox I2C driver"
 	depends on X86_64 || COMPILE_TEST
+	depends on HAS_IOPORT
 	help
 	  This exposes the Mellanox platform I2C busses to the linux I2C layer
 	  for X86 based systems.
-- 
2.37.2

[PATCH v3 12/38] iio: ad7606: Kconfig: add HAS_IOPORT dependencies

[Niklas Schnelle]

In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
 drivers/iio/adc/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 45af2302be53..df4c7d80d765 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -145,7 +145,7 @@ config AD7606
 
 config AD7606_IFACE_PARALLEL
 	tristate "Analog Devices AD7606 ADC driver with parallel interface support"
-	depends on HAS_IOMEM
+	depends on HAS_IOPORT
 	select AD7606
 	help
 	  Say yes here to build parallel interface support for Analog Devices:
-- 
2.37.2

[PATCH v3 13/38] Input: add HAS_IOPORT dependencies

[Niklas Schnelle]

In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.

Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
 drivers/input/serio/Kconfig       | 2 ++
 drivers/input/touchscreen/Kconfig | 1 +
 2 files changed, 3 insertions(+)

diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index f39b7b3f7942..5d125627c595 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -75,6 +75,7 @@ config SERIO_Q40KBD
 config SERIO_PARKBD
 	tristate "Parallel port keyboard adapter"
 	depends on PARPORT
+	depends on HAS_IOPORT
 	help
 	  Say Y here if you built a simple parallel port adapter to attach
 	  an additional AT keyboard, XT keyboard or PS/2 mouse.
@@ -148,6 +149,7 @@ config HIL_MLC
 config SERIO_PCIPS2
 	tristate "PCI PS/2 keyboard and PS/2 mouse controller"
 	depends on PCI
+	depends on HAS_IOPORT
 	help
 	  Say Y here if you have a Mobility Docking station with PS/2
 	  keyboard and mice ports.
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 1a2049b336a6..6c268b8f0d19 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -690,6 +690,7 @@ config TOUCHSCREEN_INEXIO
 
 config TOUCHSCREEN_MK712
 	tristate "ICS MicroClock MK712 touchscreen"
+	depends on ISA
 	help
 	  Say Y here if you have the ICS MicroClock MK712 touchscreen
 	  controller chip in your system.
-- 
2.37.2

[PATCH v3 14/38] Input: gameport: add ISA and HAS_IOPORT dependencies

[Niklas Schnelle]

In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. As ISA already implies HAS_IOPORT we can simply add
this dependency and guard sections of code using inb()/outb() as
alternative access methods.

Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
 drivers/input/gameport/Kconfig | 4 +++-
 include/linux/gameport.h       | 9 +++++++--
 2 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/input/gameport/Kconfig b/drivers/input/gameport/Kconfig
index 5a2c2fb3217d..fe73b26e647a 100644
--- a/drivers/input/gameport/Kconfig
+++ b/drivers/input/gameport/Kconfig
@@ -25,6 +25,7 @@ if GAMEPORT
 
 config GAMEPORT_NS558
 	tristate "Classic ISA and PnP gameport support"
+	depends on ISA
 	help
 	  Say Y here if you have an ISA or PnP gameport.
 
@@ -35,6 +36,7 @@ config GAMEPORT_NS558
 
 config GAMEPORT_L4
 	tristate "PDPI Lightning 4 gamecard support"
+	depends on ISA
 	help
 	  Say Y here if you have a PDPI Lightning 4 gamecard.
 
@@ -53,7 +55,7 @@ config GAMEPORT_EMU10K1
 
 config GAMEPORT_FM801
 	tristate "ForteMedia FM801 gameport support"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  Say Y here if you have ForteMedia FM801 PCI audio controller
 	  (Abit AU10, Genius Sound Maker, HP Workstation zx2000,
diff --git a/include/linux/gameport.h b/include/linux/gameport.h
index 8c2f00018e89..4d5720022b63 100644
--- a/include/linux/gameport.h
+++ b/include/linux/gameport.h
@@ -167,16 +167,21 @@ static inline void gameport_trigger(struct gameport *gameport)
 {
 	if (gameport->trigger)
 		gameport->trigger(gameport);
+#ifdef CONFIG_HAS_IOPORT
 	else
 		outb(0xff, gameport->io);
+#endif
 }
 
 static inline unsigned char gameport_read(struct gameport *gameport)
 {
 	if (gameport->read)
 		return gameport->read(gameport);
-	else
-		return inb(gameport->io);
+#ifdef CONFIG_HAS_IOPORT
+	return inb(gameport->io);
+#else
+	return 0xff;
+#endif
 }
 
 static inline int gameport_cooked_read(struct gameport *gameport, int *axes, int *buttons)
-- 
2.37.2

[PATCH v3 15/38] leds: add HAS_IOPORT dependencies

[Niklas Schnelle]

In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.

Acked-by: Pavel Machek <pavel@ucw.cz>
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
 drivers/leds/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 9dbce09eabac..55b4a4de8f1a 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -662,7 +662,7 @@ config LEDS_LM355x
 
 config LEDS_OT200
 	tristate "LED support for the Bachmann OT200"
-	depends on LEDS_CLASS && HAS_IOMEM && (X86_32 || COMPILE_TEST)
+	depends on LEDS_CLASS && HAS_IOPORT && (X86_32 || COMPILE_TEST)
 	help
 	  This option enables support for the LEDs on the Bachmann OT200.
 	  Say Y to enable LEDs on the Bachmann OT200.
-- 
2.37.2

[PATCH v3 16/38] media: add HAS_IOPORT dependencies

[Niklas Schnelle]

In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.

Reviewed-by: Sean Young <sean@mess.org> # media/rc
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
 drivers/media/pci/dm1105/Kconfig |  2 +-
 drivers/media/radio/Kconfig      | 14 +++++++++++++-
 drivers/media/rc/Kconfig         |  6 ++++++
 3 files changed, 20 insertions(+), 2 deletions(-)

diff --git a/drivers/media/pci/dm1105/Kconfig b/drivers/media/pci/dm1105/Kconfig
index e0e3af67c99c..4498c37f4990 100644
--- a/drivers/media/pci/dm1105/Kconfig
+++ b/drivers/media/pci/dm1105/Kconfig
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config DVB_DM1105
 	tristate "SDMC DM1105 based PCI cards"
-	depends on DVB_CORE && PCI && I2C && I2C_ALGOBIT
+	depends on DVB_CORE && PCI && I2C && I2C_ALGOBIT && HAS_IOPORT
 	select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
 	select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT
 	select DVB_STV0288 if MEDIA_SUBDRV_AUTOSELECT
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index 616a38feb641..d52eccdc7eb9 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -15,7 +15,7 @@ if RADIO_ADAPTERS
 
 config RADIO_MAXIRADIO
 	tristate "Guillemot MAXI Radio FM 2000 radio"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	select RADIO_TEA575X
 	help
 	  Choose Y here if you have this radio card.  This card may also be
@@ -232,6 +232,7 @@ source "drivers/media/radio/wl128x/Kconfig"
 menuconfig V4L_RADIO_ISA_DRIVERS
 	bool "ISA radio devices"
 	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
 	help
 	  Say Y here to enable support for these ISA drivers.
 
@@ -240,6 +241,7 @@ if V4L_RADIO_ISA_DRIVERS
 config RADIO_AZTECH
 	tristate "Aztech/Packard Bell Radio"
 	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
 	select RADIO_ISA
 	help
 	  Choose Y here if you have one of these FM radio cards, and then fill
@@ -260,6 +262,7 @@ config RADIO_AZTECH_PORT
 config RADIO_CADET
 	tristate "ADS Cadet AM/FM Tuner"
 	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
 	help
 	  Choose Y here if you have one of these AM/FM radio cards, and then
 	  fill in the port address below.
@@ -270,6 +273,7 @@ config RADIO_CADET
 config RADIO_GEMTEK
 	tristate "GemTek Radio card (or compatible) support"
 	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
 	select RADIO_ISA
 	help
 	  Choose Y here if you have this FM radio card, and then fill in the
@@ -309,6 +313,7 @@ config RADIO_GEMTEK_PROBE
 
 config RADIO_ISA
 	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
 	tristate
 
 config RADIO_MIROPCM20
@@ -329,6 +334,7 @@ config RADIO_MIROPCM20
 config RADIO_RTRACK
 	tristate "AIMSlab RadioTrack (aka RadioReveal) support"
 	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
 	select RADIO_ISA
 	help
 	  Choose Y here if you have one of these FM radio cards, and then fill
@@ -383,6 +389,7 @@ config RADIO_RTRACK_PORT
 config RADIO_SF16FMI
 	tristate "SF16-FMI/SF16-FMP/SF16-FMD Radio"
 	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
 	help
 	  Choose Y here if you have one of these FM radio cards.
 
@@ -392,6 +399,7 @@ config RADIO_SF16FMI
 config RADIO_SF16FMR2
 	tristate "SF16-FMR2/SF16-FMD2 Radio"
 	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
 	select RADIO_TEA575X
 	help
 	  Choose Y here if you have one of these FM radio cards.
@@ -402,6 +410,7 @@ config RADIO_SF16FMR2
 config RADIO_TERRATEC
 	tristate "TerraTec ActiveRadio ISA Standalone"
 	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
 	select RADIO_ISA
 	help
 	  Choose Y here if you have this FM radio card.
@@ -416,6 +425,7 @@ config RADIO_TERRATEC
 config RADIO_TRUST
 	tristate "Trust FM radio card"
 	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
 	select RADIO_ISA
 	help
 	  This is a driver for the Trust FM radio cards. Say Y if you have
@@ -439,6 +449,7 @@ config RADIO_TRUST_PORT
 config RADIO_TYPHOON
 	tristate "Typ