Linux PCI subsystem development
 help / color / mirror / Atom feed
From: Frank Li <Frank.Li@nxp.com>
To: "Kishon Vijay Abraham I" <kishon@kernel.org>,
	"Rafael J. Wysocki" <rafael@kernel.org>,
	"Thomas Gleixner" <tglx@linutronix.de>,
	"Anup Patel" <apatel@ventanamicro.com>,
	"Kishon Vijay Abraham I" <kishon@kernel.org>,
	"Marc Zyngier" <maz@kernel.org>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Rafael J. Wysocki" <rafael@kernel.org>,
	"Danilo Krummrich" <dakr@kernel.org>,
	"Manivannan Sadhasivam" <manivannan.sadhasivam@linaro.org>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Kishon Vijay Abraham I" <kishon@kernel.org>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Arnd Bergmann" <arnd@arndb.de>, "Shuah Khan" <shuah@kernel.org>,
	"Richard Zhu" <hongxing.zhu@nxp.com>,
	"Lucas Stach" <l.stach@pengutronix.de>,
	"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
	"Rob Herring" <robh@kernel.org>,
	"Shawn Guo" <shawnguo@kernel.org>,
	"Sascha Hauer" <s.hauer@pengutronix.de>,
	"Pengutronix Kernel Team" <kernel@pengutronix.de>,
	"Fabio Estevam" <festevam@gmail.com>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>
Cc: Niklas Cassel <cassel@kernel.org>,
	dlemoal@kernel.org, jdmason@kudzu.us,
	 linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,  linux-pci@vger.kernel.org,
	linux-kselftest@vger.kernel.org,  imx@lists.linux.dev,
	devicetree@vger.kernel.org,  Frank Li <Frank.Li@nxp.com>
Subject: [PATCH v14 06/15] PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
Date: Fri, 07 Feb 2025 14:39:48 -0500	[thread overview]
Message-ID: <20250207-ep-msi-v14-6-9671b136f2b8@nxp.com> (raw)
In-Reply-To: <20250207-ep-msi-v14-0-9671b136f2b8@nxp.com>

Doorbell feature is implemented by mapping the EP's MSI interrupt
controller message address to a dedicated BAR in the EPC core. It is the
responsibility of the EPF driver to pass the actual message data to be
written by the host to the doorbell BAR region through its own logic.

Tested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Change from v13 to v14
- basic roll back to v9
- use device:id as msi-map input, its will handle it
- use existed platform_device_msi_init_and_alloc_irqs()
- pass down epf->dev point, because epf->dev of-node will be the same as
epc's parent.

Change from v12 to v13
- Use DOMAIN_BUS_DEVICE_PCI_EP_MSI

Change from v10 to v12
- none

Change from v9 to v10
- Create msi domain for each function device.
- Remove only function support limiation. My hardware only support one
function, so not test more than one case.
- use "msi-map" descript msi information

  msi-map = <func_no << 8  | vfunc_no, &its, start_stream_id,  size>;

Chagne from v8 to v9
- sort header file
- use pci_epc_get(dev_name(msi_desc_to_dev(desc)));
- check epf number at pci_epf_alloc_doorbell
- Add comments for miss msi-parent case

change from v5 to v8
-none

Change from v4 to v5
- Remove request_irq() in pci_epc_alloc_doorbell() and leave to EP function
driver, so ep function driver can register differece call back function for
difference doorbell events and set irq affinity to differece CPU core.
- Improve error message when MSI allocate failure.

Change from v3 to v4
- msi change to use msi_get_virq() avoid use msi_for_each_desc().
- add new struct for pci_epf_doorbell_msg to msi msg,virq and irq name.
- move mutex lock to epc function
- initialize variable at declear place.
- passdown epf to epc*() function to simplify code.
---
 drivers/pci/endpoint/Makefile     |  2 +-
 drivers/pci/endpoint/pci-ep-msi.c | 81 +++++++++++++++++++++++++++++++++++++++
 include/linux/pci-ep-msi.h        | 26 +++++++++++++
 include/linux/pci-epf.h           | 16 ++++++++
 4 files changed, 124 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/endpoint/Makefile b/drivers/pci/endpoint/Makefile
index 95b2fe47e3b06..a1ccce440c2c5 100644
--- a/drivers/pci/endpoint/Makefile
+++ b/drivers/pci/endpoint/Makefile
@@ -5,4 +5,4 @@
 
 obj-$(CONFIG_PCI_ENDPOINT_CONFIGFS)	+= pci-ep-cfs.o
 obj-$(CONFIG_PCI_ENDPOINT)		+= pci-epc-core.o pci-epf-core.o\
-					   pci-epc-mem.o functions/
+					   pci-epc-mem.o pci-ep-msi.o functions/
diff --git a/drivers/pci/endpoint/pci-ep-msi.c b/drivers/pci/endpoint/pci-ep-msi.c
new file mode 100644
index 0000000000000..53820744ce502
--- /dev/null
+++ b/drivers/pci/endpoint/pci-ep-msi.c
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCI Endpoint *Controller* (EPC) MSI library
+ *
+ * Copyright (C) 2025 NXP
+ * Author: Frank Li <Frank.Li@nxp.com>
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/msi.h>
+#include <linux/of_irq.h>
+#include <linux/pci-epc.h>
+#include <linux/pci-epf.h>
+#include <linux/pci-ep-cfs.h>
+#include <linux/pci-ep-msi.h>
+#include <linux/slab.h>
+
+static void pci_epf_write_msi_msg(struct msi_desc *desc, struct msi_msg *msg)
+{
+	struct pci_epf *epf = to_pci_epf(desc->dev);
+
+	if (epf && epf->db_msg && desc->msi_index < epf->num_db)
+		memcpy(&epf->db_msg[desc->msi_index].msg, msg, sizeof(*msg));
+}
+
+int pci_epf_alloc_doorbell(struct pci_epf *epf, u16 num_db)
+{
+	struct pci_epc *epc = epf->epc;
+	struct device *dev = &epf->dev;
+	struct irq_domain *dom;
+	void *msg;
+	u32 rid;
+	int ret;
+	int i;
+
+	rid = PCI_EPF_DEVID(epf->func_no, epf->vfunc_no);
+	dom = of_msi_map_get_device_domain(epc->dev.parent, rid, DOMAIN_BUS_PLATFORM_MSI);
+	if (!dom) {
+		dev_err(dev, "Can't find msi domain\n");
+		return -EINVAL;
+	}
+
+	dev_set_msi_domain(dev, dom);
+
+	msg = kcalloc(num_db, sizeof(struct pci_epf_doorbell_msg), GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+
+	epf->num_db = num_db;
+	epf->db_msg = msg;
+
+	ret = platform_device_msi_init_and_alloc_irqs(&epf->dev, num_db, pci_epf_write_msi_msg);
+	if (ret) {
+		/*
+		 * The pcie_ep DT node has to specify 'msi-parent' for EP
+		 * doorbell support to work. Right now only GIC ITS is
+		 * supported. If you have GIC ITS and reached this print,
+		 * perhaps you are missing 'msi-map' in DT.
+		 */
+		dev_err(dev, "Failed to allocate MSI\n");
+		kfree(msg);
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < num_db; i++)
+		epf->db_msg[i].virq = msi_get_virq(dev, i);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epf_alloc_doorbell);
+
+void pci_epf_free_doorbell(struct pci_epf *epf)
+{
+	platform_device_msi_free_irqs_all(&epf->dev);
+
+	kfree(epf->db_msg);
+	epf->db_msg = NULL;
+	epf->num_db = 0;
+}
+EXPORT_SYMBOL_GPL(pci_epf_free_doorbell);
diff --git a/include/linux/pci-ep-msi.h b/include/linux/pci-ep-msi.h
new file mode 100644
index 0000000000000..26b1c86893ee4
--- /dev/null
+++ b/include/linux/pci-ep-msi.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * PCI Endpoint *Function* side MSI header file
+ *
+ * Copyright (C) 2024 NXP
+ * Author: Frank Li <Frank.Li@nxp.com>
+ */
+
+#ifndef __PCI_EP_MSI__
+#define __PCI_EP_MSI__
+
+#ifdef CONFIG_PCI_ENDPOINT
+int pci_epf_msi_domain_get_msi_rid(struct device *dev, u32 *rid);
+#else
+static inline int pci_epf_msi_domain_get_msi_rid(struct device *dev, u32 *rid)
+{
+	return -EINVAL;
+}
+#endif
+
+struct pci_epf;
+
+int pci_epf_alloc_doorbell(struct pci_epf *epf, u16 nums);
+void pci_epf_free_doorbell(struct pci_epf *epf);
+
+#endif /* __PCI_EP_MSI__ */
diff --git a/include/linux/pci-epf.h b/include/linux/pci-epf.h
index d2790b8b29394..518bc4171285e 100644
--- a/include/linux/pci-epf.h
+++ b/include/linux/pci-epf.h
@@ -12,6 +12,7 @@
 #include <linux/configfs.h>
 #include <linux/device.h>
 #include <linux/mod_devicetable.h>
+#include <linux/msi.h>
 #include <linux/pci.h>
 
 struct pci_epf;
@@ -125,6 +126,17 @@ struct pci_epf_bar {
 	int		flags;
 };
 
+/**
+ * struct pci_epf_doorbell_msg - represents doorbell message
+ * @msi_msg: MSI message
+ * @virq: irq number of this doorbell MSI message
+ * @name: irq name for doorbell interrupt
+ */
+struct pci_epf_doorbell_msg {
+	struct msi_msg msg;
+	int virq;
+};
+
 /**
  * struct pci_epf - represents the PCI EPF device
  * @dev: the PCI EPF device
@@ -152,6 +164,8 @@ struct pci_epf_bar {
  * @vfunction_num_map: bitmap to manage virtual function number
  * @pci_vepf: list of virtual endpoint functions associated with this function
  * @event_ops: Callbacks for capturing the EPC events
+ * @db_msg: data for MSI from RC side
+ * @num_db: number of doorbells
  */
 struct pci_epf {
 	struct device		dev;
@@ -182,6 +196,8 @@ struct pci_epf {
 	unsigned long		vfunction_num_map;
 	struct list_head	pci_vepf;
 	const struct pci_epc_event_ops *event_ops;
+	struct pci_epf_doorbell_msg *db_msg;
+	u16 num_db;
 };
 
 /**

-- 
2.34.1


  parent reply	other threads:[~2025-02-07 19:40 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-07 19:39 [PATCH v14 00/15] PCI: EP: Add RC-to-EP doorbell with platform MSI controller Frank Li
2025-02-07 19:39 ` [PATCH v14 01/15] platform-msi: Add msi_remove_device_irq_domain() in platform_device_msi_free_irqs_all() Frank Li
2025-02-07 19:39 ` [PATCH v14 02/15] irqdomain: Add IRQ_DOMAIN_FLAG_MSI_IMMUTABLE and irq_domain_is_msi_immutable() Frank Li
2025-02-07 19:39 ` [PATCH v14 03/15] irqchip/gic-v3-its: Set IRQ_DOMAIN_FLAG_MSI_IMMUTABLE for ITS Frank Li
2025-02-07 19:39 ` [PATCH v14 04/15] irqchip/gic-v3-its: Add support for device tree msi-map and msi-mask Frank Li
2025-02-07 19:39 ` [PATCH v14 05/15] PCI: endpoint: Set ID and of_node for function driver Frank Li
2025-02-07 19:39 ` Frank Li [this message]
2025-02-08 14:17   ` [PATCH v14 06/15] PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller kernel test robot
2025-02-07 19:39 ` [PATCH v14 07/15] PCI: endpoint: pci-ep-msi: Add MSI address/data pair mutable check Frank Li
2025-02-08 15:00   ` kernel test robot
2025-02-07 19:39 ` [PATCH v14 08/15] PCI: endpoint: Add pci_epf_align_inbound_addr() helper for address alignment Frank Li
2025-02-07 19:39 ` [PATCH v14 09/15] PCI: endpoint: pci-epf-test: Add doorbell test support Frank Li
2025-02-08 15:43   ` kernel test robot
2025-02-07 19:39 ` [PATCH v14 10/15] misc: pci_endpoint_test: Add doorbell test case Frank Li
2025-02-07 19:39 ` [PATCH v14 11/15] selftests: pci_endpoint: " Frank Li
2025-02-07 19:39 ` [PATCH v14 12/15] pci: imx6: Add helper function imx_pcie_add_lut_by_rid() Frank Li
2025-02-07 19:39 ` [PATCH v14 13/15] pci: imx6: Add LUT setting for MSI/IOMMU in Endpoint mode Frank Li
2025-02-07 19:39 ` [PATCH v14 14/15] arm64: dts: imx95: Add msi-map for pci-ep device Frank Li
2025-02-07 19:39 ` [PATCH v14 15/15] arm64: dts: imx95-19x19-evk: Add PCIe1 endpoint function overlay file Frank Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250207-ep-msi-v14-6-9671b136f2b8@nxp.com \
    --to=frank.li@nxp.com \
    --cc=apatel@ventanamicro.com \
    --cc=arnd@arndb.de \
    --cc=bhelgaas@google.com \
    --cc=cassel@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=dakr@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlemoal@kernel.org \
    --cc=festevam@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=hongxing.zhu@nxp.com \
    --cc=imx@lists.linux.dev \
    --cc=jdmason@kudzu.us \
    --cc=kernel@pengutronix.de \
    --cc=kishon@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=kw@linux.com \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lpieralisi@kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=maz@kernel.org \
    --cc=rafael@kernel.org \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=shuah@kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox