Re: [PATCH v2] PCI: Allow D3 for native Hotplug capable Root Ports on non-x86 platforms

[Bjorn Helgaas <helgaas@kernel.org>]

On Wed, Jul 29, 2026 at 06:50:05PM +0200, Manivannan Sadhasivam wrote:
> Commit eb3b5bf1a88d ("PCI: Whitelist native hotplug ports for runtime D3"),
> prevented native Hotplug capable Root Ports from entering D3 citing issues
> on old Intel SkyLake Xeon-SP platform.
> 
> But there is no reason to restrict D3 for native Hotplug capable Root
> Ports on non-x86 platforms. We recently enabled D3 on non-Hotplug capable
> Root Ports on non-x86 platforms (specifically for DT platforms) in commit
> a5fb3ff63287 ("PCI: Allow PCI bridges to go to D3Hot on all non-x86"). So
> do the same for native Hotplug capable Root Ports as well.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>

Applied to pci/pm for v7.3, thanks!

> ---
> 
> Changes in v2:
> 
> * Switched to CONFIG_X86 check instead of of_have_populated_dt() as per comments
>   from Lukas.
> 
>  drivers/pci/pci.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index 77b17b13ee61..94f8a4da6009 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -3020,11 +3020,11 @@ bool pci_bridge_d3_possible(struct pci_dev *bridge)
>  			return true;
>  
>  		/*
> -		 * Hotplug ports handled natively by the OS were not validated
> -		 * by vendors for runtime D3 at least until 2018 because there
> -		 * was no OS support.
> +		 * Hotplug ports handled natively by the OS on x86 platforms
> +		 * were not validated by vendors for runtime D3 at least until
> +		 * 2018 because there was no OS support.
>  		 */
> -		if (bridge->is_pciehp)
> +		if (IS_ENABLED(CONFIG_X86) && bridge->is_pciehp)
>  			return false;
>  
>  		if (dmi_check_system(bridge_d3_blacklist))
> -- 
> 2.43.0
>