[PATCH v4 18/23] PCI/AER: Refactor cper_print_aer() for use by CXL driver module

[PATCH v4 18/23] PCI/AER: Refactor cper_print_aer() for use by CXL driver module

[Terry Bowman]

The CXL driver plans to use cper_print_aer() for logging restricted CXL
host (RCH) AER errors. cper_print_aer() is not currently exported and
therefore not usable by the CXL driver built as a loadable module. Export
the cper_print_aer() function making it available.

The CONFIG_ACPI_APEI_PCIEAER kernel config is currently used to enable
cper_print_aer(). cper_print_aer() logs the AER registers and is
useful in PCIE AER logging outside of APEI. Remove the
CONFIG_ACPI_APEI_PCIEAER dependency to enable cper_print_aer().

The cper_print_aer() function name implies CPER specific use but is useful
in non-CPER cases as well. Rename cper_print_aer() to pci_print_aer().

Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Cc: Mahesh J Salgaonkar <mahesh@linux.ibm.com>
Cc: "Oliver O'Halloran" <oohall@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/pci/pcie/aer.c | 9 +++++----
 include/linux/aer.h    | 2 +-
 2 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index f6c24ded134c..d3344fcf1f79 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -771,9 +771,10 @@ int cper_severity_to_aer(int cper_severity)
 	}
 }
 EXPORT_SYMBOL_GPL(cper_severity_to_aer);
+#endif
 
-void cper_print_aer(struct pci_dev *dev, int aer_severity,
-		    struct aer_capability_regs *aer)
+void pci_print_aer(struct pci_dev *dev, int aer_severity,
+		   struct aer_capability_regs *aer)
 {
 	int layer, agent, tlp_header_valid = 0;
 	u32 status, mask;
@@ -812,7 +813,7 @@ void cper_print_aer(struct pci_dev *dev, int aer_severity,
 	trace_aer_event(dev_name(&dev->dev), (status & ~mask),
 			aer_severity, tlp_header_valid, &aer->header_log);
 }
-#endif
+EXPORT_SYMBOL_NS_GPL(pci_print_aer, CXL);
 
 /**
  * add_error_device - list device to be handled
@@ -1009,7 +1010,7 @@ static void aer_recover_work_func(struct work_struct *work)
 			       PCI_SLOT(entry.devfn), PCI_FUNC(entry.devfn));
 			continue;
 		}
-		cper_print_aer(pdev, entry.severity, entry.regs);
+		pci_print_aer(pdev, entry.severity, entry.regs);
 		if (entry.severity == AER_NONFATAL)
 			pcie_do_recovery(pdev, pci_channel_io_normal,
 					 aer_root_reset);
diff --git a/include/linux/aer.h b/include/linux/aer.h
index 97f64ba1b34a..8f124b904314 100644
--- a/include/linux/aer.h
+++ b/include/linux/aer.h
@@ -64,7 +64,7 @@ static inline void pci_save_aer_state(struct pci_dev *dev) {}
 static inline void pci_restore_aer_state(struct pci_dev *dev) {}
 #endif
 
-void cper_print_aer(struct pci_dev *dev, int aer_severity,
+void pci_print_aer(struct pci_dev *dev, int aer_severity,
 		    struct aer_capability_regs *aer);
 int cper_severity_to_aer(int cper_severity);
 void aer_recover_queue(int domain, unsigned int bus, unsigned int devfn,
-- 
2.34.1

Re: [PATCH v4 18/23] PCI/AER: Refactor cper_print_aer() for use by CXL driver module

[Bjorn Helgaas]

On Tue, May 23, 2023 at 06:22:09PM -0500, Terry Bowman wrote:
> The CXL driver plans to use cper_print_aer() for logging restricted CXL
> host (RCH) AER errors. cper_print_aer() is not currently exported and
> therefore not usable by the CXL driver built as a loadable module. Export
> the cper_print_aer() function making it available.
> 
> The CONFIG_ACPI_APEI_PCIEAER kernel config is currently used to enable
> cper_print_aer(). cper_print_aer() logs the AER registers and is
> useful in PCIE AER logging outside of APEI. Remove the
> CONFIG_ACPI_APEI_PCIEAER dependency to enable cper_print_aer().
> 
> The cper_print_aer() function name implies CPER specific use but is useful
> in non-CPER cases as well. Rename cper_print_aer() to pci_print_aer().
> 
> Co-developed-by: Robert Richter <rrichter@amd.com>
> Signed-off-by: Robert Richter <rrichter@amd.com>
> Signed-off-by: Terry Bowman <terry.bowman@amd.com>
> Cc: Mahesh J Salgaonkar <mahesh@linux.ibm.com>
> Cc: "Oliver O'Halloran" <oohall@gmail.com>
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> Cc: linux-pci@vger.kernel.org
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Acked-by: Bjorn Helgaas <bhelgaas@google.com>

> ---
>  drivers/pci/pcie/aer.c | 9 +++++----
>  include/linux/aer.h    | 2 +-
>  2 files changed, 6 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
> index f6c24ded134c..d3344fcf1f79 100644
> --- a/drivers/pci/pcie/aer.c
> +++ b/drivers/pci/pcie/aer.c
> @@ -771,9 +771,10 @@ int cper_severity_to_aer(int cper_severity)
>  	}
>  }
>  EXPORT_SYMBOL_GPL(cper_severity_to_aer);
> +#endif
>  
> -void cper_print_aer(struct pci_dev *dev, int aer_severity,
> -		    struct aer_capability_regs *aer)
> +void pci_print_aer(struct pci_dev *dev, int aer_severity,
> +		   struct aer_capability_regs *aer)
>  {
>  	int layer, agent, tlp_header_valid = 0;
>  	u32 status, mask;
> @@ -812,7 +813,7 @@ void cper_print_aer(struct pci_dev *dev, int aer_severity,
>  	trace_aer_event(dev_name(&dev->dev), (status & ~mask),
>  			aer_severity, tlp_header_valid, &aer->header_log);
>  }
> -#endif
> +EXPORT_SYMBOL_NS_GPL(pci_print_aer, CXL);
>  
>  /**
>   * add_error_device - list device to be handled
> @@ -1009,7 +1010,7 @@ static void aer_recover_work_func(struct work_struct *work)
>  			       PCI_SLOT(entry.devfn), PCI_FUNC(entry.devfn));
>  			continue;
>  		}
> -		cper_print_aer(pdev, entry.severity, entry.regs);
> +		pci_print_aer(pdev, entry.severity, entry.regs);
>  		if (entry.severity == AER_NONFATAL)
>  			pcie_do_recovery(pdev, pci_channel_io_normal,
>  					 aer_root_reset);
> diff --git a/include/linux/aer.h b/include/linux/aer.h
> index 97f64ba1b34a..8f124b904314 100644
> --- a/include/linux/aer.h
> +++ b/include/linux/aer.h
> @@ -64,7 +64,7 @@ static inline void pci_save_aer_state(struct pci_dev *dev) {}
>  static inline void pci_restore_aer_state(struct pci_dev *dev) {}
>  #endif
>  
> -void cper_print_aer(struct pci_dev *dev, int aer_severity,
> +void pci_print_aer(struct pci_dev *dev, int aer_severity,
>  		    struct aer_capability_regs *aer);
>  int cper_severity_to_aer(int cper_severity);
>  void aer_recover_queue(int domain, unsigned int bus, unsigned int devfn,
> -- 
> 2.34.1
> 

Re: [PATCH v4 18/23] PCI/AER: Refactor cper_print_aer() for use by CXL driver module

[Terry Bowman]

On 5/24/23 11:55, Bjorn Helgaas wrote:
> On Tue, May 23, 2023 at 06:22:09PM -0500, Terry Bowman wrote:
>> The CXL driver plans to use cper_print_aer() for logging restricted CXL
>> host (RCH) AER errors. cper_print_aer() is not currently exported and
>> therefore not usable by the CXL driver built as a loadable module. Export
>> the cper_print_aer() function making it available.
>>
>> The CONFIG_ACPI_APEI_PCIEAER kernel config is currently used to enable
>> cper_print_aer(). cper_print_aer() logs the AER registers and is
>> useful in PCIE AER logging outside of APEI. Remove the
>> CONFIG_ACPI_APEI_PCIEAER dependency to enable cper_print_aer().
>>
>> The cper_print_aer() function name implies CPER specific use but is useful
>> in non-CPER cases as well. Rename cper_print_aer() to pci_print_aer().
>>
>> Co-developed-by: Robert Richter <rrichter@amd.com>
>> Signed-off-by: Robert Richter <rrichter@amd.com>
>> Signed-off-by: Terry Bowman <terry.bowman@amd.com>
>> Cc: Mahesh J Salgaonkar <mahesh@linux.ibm.com>
>> Cc: "Oliver O'Halloran" <oohall@gmail.com>
>> Cc: Bjorn Helgaas <bhelgaas@google.com>
>> Cc: linux-pci@vger.kernel.org
>> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> 
> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
> 

Thank you Bjorn.

Regards,
Terry

[PATCH v4 22/23] PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler

[Terry Bowman]

From: Robert Richter <rrichter@amd.com>

In Restricted CXL Device (RCD) mode a CXL device is exposed as an
RCiEP, but CXL downstream and upstream ports are not enumerated and
not visible in the PCIe hierarchy. Protocol and link errors are sent
to an RCEC.

Restricted CXL host (RCH) downstream port-detected errors are signaled
as internal AER errors, either Uncorrectable Internal Error (UIE) or
Corrected Internal Errors (CIE). The error source is the id of the
RCEC. A CXL handler must then inspect the error status in various CXL
registers residing in the dport's component register space (CXL RAS
capability) or the dport's RCRB (PCIe AER extended capability). [1]

Errors showing up in the RCEC's error handler must be handled and
connected to the CXL subsystem. Implement this by forwarding the error
to all CXL devices below the RCEC. Since the entire CXL device is
controlled only using PCIe Configuration Space of device 0, function
0, only pass it there [2]. The error handling is limited to currently
supported devices with the Memory Device class code set
(PCI_CLASS_MEMORY_CXL, 502h), where the handler can be implemented in
the existing cxl_pci driver. Support of CXL devices (e.g. a CXL.cache
device) can be enabled later.

In addition to errors directed to the CXL endpoint device, a handler
must also inspect the CXL RAS and PCIe AER capabilities of the CXL
downstream port that is connected to the device.

Since CXL downstream port errors are signaled using internal errors,
the handler requires those errors to be unmasked. This is subject of a
follow-on patch.

The reason for choosing this implementation is that a CXL RCEC device
is bound to the AER port driver, but the driver does not allow it to
register a custom specific handler to support CXL. Connecting the RCEC
hard-wired with a CXL handler does not work, as the CXL subsystem
might not be present all the time. The alternative to add an
implementation to the portdrv to allow the registration of a custom
RCEC error handler isn't worth doing it as CXL would be its only user.
Instead, just check for an CXL RCEC and pass it down to the connected
CXL device's error handler. With this approach the code can entirely
be implemented in the PCIe AER driver and is independent of the CXL
subsystem. The CXL driver only provides the handler.

[1] CXL 3.0 spec, 12.2.1.1 RCH Downstream Port-detected Errors
[2] CXL 3.0 spec, 8.1.3 PCIe DVSEC for CXL Devices

Co-developed-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Cc: "Oliver O'Halloran" <oohall@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-pci@vger.kernel.org
---
 drivers/pci/pcie/Kconfig |  12 +++++
 drivers/pci/pcie/aer.c   | 100 ++++++++++++++++++++++++++++++++++++++-
 2 files changed, 110 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig
index 228652a59f27..4f0e70fafe2d 100644
--- a/drivers/pci/pcie/Kconfig
+++ b/drivers/pci/pcie/Kconfig
@@ -49,6 +49,18 @@ config PCIEAER_INJECT
 	  gotten from:
 	     https://git.kernel.org/cgit/linux/kernel/git/gong.chen/aer-inject.git/
 
+config PCIEAER_CXL
+	bool "PCI Express CXL RAS support for Restricted Hosts (RCH)"
+	default y
+	depends on PCIEAER && CXL_PCI
+	help
+	  Enables error handling of downstream ports of a CXL host
+	  that is operating in RCD mode (Restricted CXL Host, RCH).
+	  The downstream port reports AER errors to a given RCEC.
+	  Errors are handled by the CXL memory device driver.
+
+	  If unsure, say Y.
+
 #
 # PCI Express ECRC
 #
diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index d3344fcf1f79..2e3f00b6a5bd 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -946,14 +946,104 @@ static bool find_source_device(struct pci_dev *parent,
 	return true;
 }
 
+#ifdef CONFIG_PCIEAER_CXL
+
+static bool is_cxl_mem_dev(struct pci_dev *dev)
+{
+	/*
+	 * The capability, status, and control fields in Device 0,
+	 * Function 0 DVSEC control the CXL functionality of the
+	 * entire device (CXL 3.0, 8.1.3).
+	 */
+	if (dev->devfn != PCI_DEVFN(0, 0))
+		return false;
+
+	/*
+	 * CXL Memory Devices must have the 502h class code set (CXL
+	 * 3.0, 8.1.12.1).
+	 */
+	if ((dev->class >> 8) != PCI_CLASS_MEMORY_CXL)
+		return false;
+
+	return true;
+}
+
+static bool cxl_error_is_native(struct pci_dev *dev)
+{
+	struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
+
+	if (pcie_ports_native)
+		return true;
+
+	return host->native_aer && host->native_cxl_error;
+}
+
+static bool is_internal_error(struct aer_err_info *info)
+{
+	if (info->severity == AER_CORRECTABLE)
+		return info->status & PCI_ERR_COR_INTERNAL;
+
+	return info->status & PCI_ERR_UNC_INTN;
+}
+
+static int cxl_rch_handle_error_iter(struct pci_dev *dev, void *data)
+{
+	struct aer_err_info *info = (struct aer_err_info *)data;
+	const struct pci_error_handlers *err_handler;
+
+	if (!is_cxl_mem_dev(dev) || !cxl_error_is_native(dev))
+		return 0;
+
+	/* protect dev->driver */
+	device_lock(&dev->dev);
+
+	err_handler = dev->driver ? dev->driver->err_handler : NULL;
+	if (!err_handler)
+		goto out;
+
+	if (info->severity == AER_CORRECTABLE) {
+		if (err_handler->cor_error_detected)
+			err_handler->cor_error_detected(dev);
+	} else if (err_handler->error_detected) {
+		if (info->severity == AER_NONFATAL)
+			err_handler->error_detected(dev, pci_channel_io_normal);
+		else if (info->severity == AER_FATAL)
+			err_handler->error_detected(dev, pci_channel_io_frozen);
+	}
+out:
+	device_unlock(&dev->dev);
+	return 0;
+}
+
+static void cxl_rch_handle_error(struct pci_dev *dev, struct aer_err_info *info)
+{
+	/*
+	 * CXL downstream ports of a CXL host that is operating in RCD
+	 * mode (RCH) signal errors as RCEC internal errors. Forward
+	 * them to all CXL devices below the RCEC.
+	 *
+	 * See CXL 3.0:
+	 *   9.11.8 CXL Devices Attached to an RCH
+	 *   12.2.1.1 RCH Downstream Port-detected Errors
+	 */
+	if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_EC &&
+	    is_internal_error(info))
+		pcie_walk_rcec(dev, cxl_rch_handle_error_iter, info);
+}
+
+#else
+static inline void cxl_rch_handle_error(struct pci_dev *dev,
+					struct aer_err_info *info) { }
+#endif
+
 /**
- * handle_error_source - handle logging error into an event log
+ * pci_aer_handle_error - handle logging error into an event log
  * @dev: pointer to pci_dev data structure of error source device
  * @info: comprehensive error information
  *
  * Invoked when an error being detected by Root Port.
  */
-static void handle_error_source(struct pci_dev *dev, struct aer_err_info *info)
+static void pci_aer_handle_error(struct pci_dev *dev, struct aer_err_info *info)
 {
 	int aer = dev->aer_cap;
 
@@ -977,6 +1067,12 @@ static void handle_error_source(struct pci_dev *dev, struct aer_err_info *info)
 		pcie_do_recovery(dev, pci_channel_io_normal, aer_root_reset);
 	else if (info->severity == AER_FATAL)
 		pcie_do_recovery(dev, pci_channel_io_frozen, aer_root_reset);
+}
+
+static void handle_error_source(struct pci_dev *dev, struct aer_err_info *info)
+{
+	cxl_rch_handle_error(dev, info);
+	pci_aer_handle_error(dev, info);
 	pci_dev_put(dev);
 }
 
-- 
2.34.1

Re: [PATCH v4 22/23] PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler

[Bjorn Helgaas]

On Tue, May 23, 2023 at 06:22:13PM -0500, Terry Bowman wrote:
> From: Robert Richter <rrichter@amd.com>
> 
> In Restricted CXL Device (RCD) mode a CXL device is exposed as an
> RCiEP, but CXL downstream and upstream ports are not enumerated and
> not visible in the PCIe hierarchy. Protocol and link errors are sent
> to an RCEC.
>
> Restricted CXL host (RCH) downstream port-detected errors are signaled
> as internal AER errors, either Uncorrectable Internal Error (UIE) or
> Corrected Internal Errors (CIE). 

From the parallelism with RCD above, I first thought that RCH devices
were non-RCD mode and *were* enumerated as part of the PCIe hierarchy,
but actually I suspect it's more like the following?

  ... but CXL downstream and upstream ports are not enumerated and not
  visible in the PCIe hierarchy.

  Protocol and link errors from these non-enumerated ports are
  signaled as internal AER errors ... via a CXL RCEC.

> The error source is the id of the RCEC.

This seems odd; I assume this refers to the RCEC's AER Error Source
Identification register, and the ERR_COR or ERR_FATAL/NONFATAL Source
Identification would ordinarily be the Requester ID of the RCiEP that
"sent" the Error Message.  But you're saying it's actually the ID of
the *RCEC*, not the RCiEP?

We're going to call pci_aer_handle_error() as well, to handle the
non-internal errors, and I'm pretty sure that path expects the RCiEP
ID there.

Whatever the answer, I'm not sure this sentence is actually relevant
to this patch, since this patch doesn't read PCI_ERR_ROOT_ERR_SRC or
look at struct aer_err_source.id.

> A CXL handler must then inspect the error status in various CXL
> registers residing in the dport's component register space (CXL RAS
> capability) or the dport's RCRB (PCIe AER extended capability). [1]
> 
> Errors showing up in the RCEC's error handler must be handled and
> connected to the CXL subsystem. Implement this by forwarding the error
> to all CXL devices below the RCEC. Since the entire CXL device is
> controlled only using PCIe Configuration Space of device 0, function
> 0, only pass it there [2]. The error handling is limited to currently
> supported devices with the Memory Device class code set
> (PCI_CLASS_MEMORY_CXL, 502h), where the handler can be implemented in
> the existing cxl_pci driver. Support of CXL devices (e.g. a CXL.cache
> device) can be enabled later.

I assume the Memory Devices are CXL devices, so maybe "Error handling
for *other* CXL devices ... can be enabled later"?  

IIUC, this happens via cxl_rch_handle_error_iter() calling
pci_error_handlers for CXL RCiEPs.  Maybe the is_cxl_mem_dev() check
belongs inside those handlers, since that driver claimed the RCiEP and
should know its functionality?  Maybe is_internal_error() and
cxl_error_is_native(), too?

> In addition to errors directed to the CXL endpoint device, a handler
> must also inspect the CXL RAS and PCIe AER capabilities of the CXL
> downstream port that is connected to the device.
> 
> Since CXL downstream port errors are signaled using internal errors,
> the handler requires those errors to be unmasked. This is subject of a
> follow-on patch.
> 
> The reason for choosing this implementation is that a CXL RCEC device
> is bound to the AER port driver,

  ... is that the AER service driver claims the CXL RCEC device, but
  does not allow registration of a CXL sub-service driver ...

> but the driver does not allow it to
> register a custom specific handler to support CXL. Connecting the RCEC
> hard-wired with a CXL handler does not work, as the CXL subsystem
> might not be present all the time. The alternative to add an
> implementation to the portdrv to allow the registration of a custom
> RCEC error handler isn't worth doing it as CXL would be its only user.
> Instead, just check for an CXL RCEC and pass it down to the connected
> CXL device's error handler. With this approach the code can entirely
> be implemented in the PCIe AER driver and is independent of the CXL
> subsystem. The CXL driver only provides the handler.
> 
> [1] CXL 3.0 spec, 12.2.1.1 RCH Downstream Port-detected Errors
> [2] CXL 3.0 spec, 8.1.3 PCIe DVSEC for CXL Devices
> 
> Co-developed-by: Terry Bowman <terry.bowman@amd.com>
> Signed-off-by: Terry Bowman <terry.bowman@amd.com>
> Signed-off-by: Robert Richter <rrichter@amd.com>
> Cc: "Oliver O'Halloran" <oohall@gmail.com>
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> Cc: linuxppc-dev@lists.ozlabs.org
> Cc: linux-pci@vger.kernel.org

Given the questions are minor:

Acked-by: Bjorn Helgaas <bhelgaas@google.com>

> ---
>  drivers/pci/pcie/Kconfig |  12 +++++
>  drivers/pci/pcie/aer.c   | 100 ++++++++++++++++++++++++++++++++++++++-
>  2 files changed, 110 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig
> index 228652a59f27..4f0e70fafe2d 100644
> --- a/drivers/pci/pcie/Kconfig
> +++ b/drivers/pci/pcie/Kconfig
> @@ -49,6 +49,18 @@ config PCIEAER_INJECT
>  	  gotten from:
>  	     https://git.kernel.org/cgit/linux/kernel/git/gong.chen/aer-inject.git/
>  
> +config PCIEAER_CXL
> +	bool "PCI Express CXL RAS support for Restricted Hosts (RCH)"
> +	default y
> +	depends on PCIEAER && CXL_PCI
> +	help
> +	  Enables error handling of downstream ports of a CXL host
> +	  that is operating in RCD mode (Restricted CXL Host, RCH).
> +	  The downstream port reports AER errors to a given RCEC.
> +	  Errors are handled by the CXL memory device driver.
> +
> +	  If unsure, say Y.
> +
>  #
>  # PCI Express ECRC
>  #
> diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
> index d3344fcf1f79..2e3f00b6a5bd 100644
> --- a/drivers/pci/pcie/aer.c
> +++ b/drivers/pci/pcie/aer.c
> @@ -946,14 +946,104 @@ static bool find_source_device(struct pci_dev *parent,
>  	return true;
>  }
>  
> +#ifdef CONFIG_PCIEAER_CXL
> +
> +static bool is_cxl_mem_dev(struct pci_dev *dev)
> +{
> +	/*
> +	 * The capability, status, and control fields in Device 0,
> +	 * Function 0 DVSEC control the CXL functionality of the
> +	 * entire device (CXL 3.0, 8.1.3).
> +	 */
> +	if (dev->devfn != PCI_DEVFN(0, 0))
> +		return false;
> +
> +	/*
> +	 * CXL Memory Devices must have the 502h class code set (CXL
> +	 * 3.0, 8.1.12.1).
> +	 */
> +	if ((dev->class >> 8) != PCI_CLASS_MEMORY_CXL)
> +		return false;
> +
> +	return true;
> +}
> +
> +static bool cxl_error_is_native(struct pci_dev *dev)
> +{
> +	struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
> +
> +	if (pcie_ports_native)
> +		return true;
> +
> +	return host->native_aer && host->native_cxl_error;
> +}
> +
> +static bool is_internal_error(struct aer_err_info *info)
> +{
> +	if (info->severity == AER_CORRECTABLE)
> +		return info->status & PCI_ERR_COR_INTERNAL;
> +
> +	return info->status & PCI_ERR_UNC_INTN;
> +}
> +
> +static int cxl_rch_handle_error_iter(struct pci_dev *dev, void *data)
> +{
> +	struct aer_err_info *info = (struct aer_err_info *)data;
> +	const struct pci_error_handlers *err_handler;
> +
> +	if (!is_cxl_mem_dev(dev) || !cxl_error_is_native(dev))
> +		return 0;
> +
> +	/* protect dev->driver */
> +	device_lock(&dev->dev);
> +
> +	err_handler = dev->driver ? dev->driver->err_handler : NULL;
> +	if (!err_handler)
> +		goto out;
> +
> +	if (info->severity == AER_CORRECTABLE) {
> +		if (err_handler->cor_error_detected)
> +			err_handler->cor_error_detected(dev);
> +	} else if (err_handler->error_detected) {
> +		if (info->severity == AER_NONFATAL)
> +			err_handler->error_detected(dev, pci_channel_io_normal);
> +		else if (info->severity == AER_FATAL)
> +			err_handler->error_detected(dev, pci_channel_io_frozen);
> +	}
> +out:
> +	device_unlock(&dev->dev);
> +	return 0;
> +}
> +
> +static void cxl_rch_handle_error(struct pci_dev *dev, struct aer_err_info *info)
> +{
> +	/*
> +	 * CXL downstream ports of a CXL host that is operating in RCD
> +	 * mode (RCH) signal errors as RCEC internal errors. Forward
> +	 * them to all CXL devices below the RCEC.
> +	 *
> +	 * See CXL 3.0:
> +	 *   9.11.8 CXL Devices Attached to an RCH
> +	 *   12.2.1.1 RCH Downstream Port-detected Errors
> +	 */
> +	if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_EC &&
> +	    is_internal_error(info))
> +		pcie_walk_rcec(dev, cxl_rch_handle_error_iter, info);
> +}
> +
> +#else
> +static inline void cxl_rch_handle_error(struct pci_dev *dev,
> +					struct aer_err_info *info) { }
> +#endif
> +
>  /**
> - * handle_error_source - handle logging error into an event log
> + * pci_aer_handle_error - handle logging error into an event log
>   * @dev: pointer to pci_dev data structure of error source device
>   * @info: comprehensive error information
>   *
>   * Invoked when an error being detected by Root Port.
>   */
> -static void handle_error_source(struct pci_dev *dev, struct aer_err_info *info)
> +static void pci_aer_handle_error(struct pci_dev *dev, struct aer_err_info *info)
>  {
>  	int aer = dev->aer_cap;
>  
> @@ -977,6 +1067,12 @@ static void handle_error_source(struct pci_dev *dev, struct aer_err_info *info)
>  		pcie_do_recovery(dev, pci_channel_io_normal, aer_root_reset);
>  	else if (info->severity == AER_FATAL)
>  		pcie_do_recovery(dev, pci_channel_io_frozen, aer_root_reset);
> +}
> +
> +static void handle_error_source(struct pci_dev *dev, struct aer_err_info *info)
> +{
> +	cxl_rch_handle_error(dev, info);
> +	pci_aer_handle_error(dev, info);
>  	pci_dev_put(dev);
>  }
>  
> -- 
> 2.34.1
> 

Re: [PATCH v4 22/23] PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler

[Robert Richter]

eOn 24.05.23 16:32:35, Bjorn Helgaas wrote:
> On Tue, May 23, 2023 at 06:22:13PM -0500, Terry Bowman wrote:
> > From: Robert Richter <rrichter@amd.com>
> > 
> > In Restricted CXL Device (RCD) mode a CXL device is exposed as an
> > RCiEP, but CXL downstream and upstream ports are not enumerated and
> > not visible in the PCIe hierarchy. Protocol and link errors are sent
> > to an RCEC.
> >
> > Restricted CXL host (RCH) downstream port-detected errors are signaled
> > as internal AER errors, either Uncorrectable Internal Error (UIE) or
> > Corrected Internal Errors (CIE). 
> 
> From the parallelism with RCD above, I first thought that RCH devices
> were non-RCD mode and *were* enumerated as part of the PCIe hierarchy,
> but actually I suspect it's more like the following?
> 
>   ... but CXL downstream and upstream ports are not enumerated and not
>   visible in the PCIe hierarchy.
> 
>   Protocol and link errors from these non-enumerated ports are
>   signaled as internal AER errors ... via a CXL RCEC.

Exactly, except the RCEC is standard PCIe and also must not
necessarily on the same PCI bus as the CXL RCiEPs are.

> 
> > The error source is the id of the RCEC.
> 
> This seems odd; I assume this refers to the RCEC's AER Error Source
> Identification register, and the ERR_COR or ERR_FATAL/NONFATAL Source
> Identification would ordinarily be the Requester ID of the RCiEP that
> "sent" the Error Message.  But you're saying it's actually the ID of
> the *RCEC*, not the RCiEP?

Right, the downstream port has it's own AER ext capability in
non-config (io mapped) RCRB regsister range. Errors originating from
there are signaled as internal AER errors via the RCEC *with* the
RCEC's Requester ID. Code walks through all associated CXL endpoints,
determines the dport and checks its AER.

There is also an RDPAS structure defined in CXL but that is only a
different way to provide the RCEC to dport association instead of
using the RCEC's Endpoint Association Extended Capability. In the end
we get all associated RCHs and check the AER of all their dports.

The upstream port is signaled using the RCiEP's AER. CXL spec is
strict here: "Upstream Port RCRB shall not implement the AER Extended
Capability." The RCiEP's requestor ID is used then and it's config
space the AER is in.

CXL.cachemem errors are reported with the RCiEP as requester
too. Status is in the CXL RAS cap and the UIE or CIE is set
respectively in the AER status of the RCiEP.

> 
> We're going to call pci_aer_handle_error() as well, to handle the
> non-internal errors, and I'm pretty sure that path expects the RCiEP
> ID there.
> 
> Whatever the answer, I'm not sure this sentence is actually relevant
> to this patch, since this patch doesn't read PCI_ERR_ROOT_ERR_SRC or
> look at struct aer_err_source.id.

The source id is used in aer_process_err_devices() which finally calls
handle_error_source() for the device with the requestor id. This is
the place where cxl_rch_handle_error() checks if it is an RCEC that
recieved an internal error and has cxl devices connected to it. Then,
the request is forwarded to the cxl_mem handler which also needs to
check the dport now. That is, pcie_walk_rcec() in
cxl_rch_handle_error() is called with the RCEC's pci handle,
cxl_rch_handle_error_iter() with the RCiEP's pci handle..

> 
> > A CXL handler must then inspect the error status in various CXL
> > registers residing in the dport's component register space (CXL RAS
> > capability) or the dport's RCRB (PCIe AER extended capability). [1]
> > 
> > Errors showing up in the RCEC's error handler must be handled and
> > connected to the CXL subsystem. Implement this by forwarding the error
> > to all CXL devices below the RCEC. Since the entire CXL device is
> > controlled only using PCIe Configuration Space of device 0, function
> > 0, only pass it there [2]. The error handling is limited to currently
> > supported devices with the Memory Device class code set
> > (PCI_CLASS_MEMORY_CXL, 502h), where the handler can be implemented in
> > the existing cxl_pci driver. Support of CXL devices (e.g. a CXL.cache
> > device) can be enabled later.
> 
> I assume the Memory Devices are CXL devices, so maybe "Error handling
> for *other* CXL devices ... can be enabled later"?  
> 
> IIUC, this happens via cxl_rch_handle_error_iter() calling
> pci_error_handlers for CXL RCiEPs.  Maybe the is_cxl_mem_dev() check
> belongs inside those handlers, since that driver claimed the RCiEP and
> should know its functionality?  Maybe is_internal_error() and
> cxl_error_is_native(), too?

The check is outside the handlers on purpose. A corresponding handler
is needed, it is cxl_pci_driver, see the class code in
cxl_mem_pci_tbl. As the handler must handle other device's sources,
only aware drivers may be called here. Otherwise a device's error
handler could be called for errors there the source is the RCEC.

> 
> > In addition to errors directed to the CXL endpoint device, a handler
> > must also inspect the CXL RAS and PCIe AER capabilities of the CXL
> > downstream port that is connected to the device.
> > 
> > Since CXL downstream port errors are signaled using internal errors,
> > the handler requires those errors to be unmasked. This is subject of a
> > follow-on patch.
> > 
> > The reason for choosing this implementation is that a CXL RCEC device
> > is bound to the AER port driver,
> 
>   ... is that the AER service driver claims the CXL RCEC device, but
>   does not allow registration of a CXL sub-service driver ...
> 
> > but the driver does not allow it to
> > register a custom specific handler to support CXL. Connecting the RCEC
> > hard-wired with a CXL handler does not work, as the CXL subsystem
> > might not be present all the time. The alternative to add an
> > implementation to the portdrv to allow the registration of a custom
> > RCEC error handler isn't worth doing it as CXL would be its only user.
> > Instead, just check for an CXL RCEC and pass it down to the connected
> > CXL device's error handler. With this approach the code can entirely
> > be implemented in the PCIe AER driver and is independent of the CXL
> > subsystem. The CXL driver only provides the handler.
> > 
> > [1] CXL 3.0 spec, 12.2.1.1 RCH Downstream Port-detected Errors
> > [2] CXL 3.0 spec, 8.1.3 PCIe DVSEC for CXL Devices
> > 
> > Co-developed-by: Terry Bowman <terry.bowman@amd.com>
> > Signed-off-by: Terry Bowman <terry.bowman@amd.com>
> > Signed-off-by: Robert Richter <rrichter@amd.com>
> > Cc: "Oliver O'Halloran" <oohall@gmail.com>
> > Cc: Bjorn Helgaas <bhelgaas@google.com>
> > Cc: linuxppc-dev@lists.ozlabs.org
> > Cc: linux-pci@vger.kernel.org
> 
> Given the questions are minor:

Will update description according to you comment.

> 
> Acked-by: Bjorn Helgaas <bhelgaas@google.com>

Thanks for review and the ACK.

-Robert

> 
> > ---
> >  drivers/pci/pcie/Kconfig |  12 +++++
> >  drivers/pci/pcie/aer.c   | 100 ++++++++++++++++++++++++++++++++++++++-
> >  2 files changed, 110 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig
> > index 228652a59f27..4f0e70fafe2d 100644
> > --- a/drivers/pci/pcie/Kconfig
> > +++ b/drivers/pci/pcie/Kconfig
> > @@ -49,6 +49,18 @@ config PCIEAER_INJECT
> >  	  gotten from:
> >  	     https://git.kernel.org/cgit/linux/kernel/git/gong.chen/aer-inject.git/
> >  
> > +config PCIEAER_CXL
> > +	bool "PCI Express CXL RAS support for Restricted Hosts (RCH)"
> > +	default y
> > +	depends on PCIEAER && CXL_PCI
> > +	help
> > +	  Enables error handling of downstream ports of a CXL host
> > +	  that is operating in RCD mode (Restricted CXL Host, RCH).
> > +	  The downstream port reports AER errors to a given RCEC.
> > +	  Errors are handled by the CXL memory device driver.
> > +
> > +	  If unsure, say Y.
> > +
> >  #
> >  # PCI Express ECRC
> >  #
> > diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
> > index d3344fcf1f79..2e3f00b6a5bd 100644
> > --- a/drivers/pci/pcie/aer.c
> > +++ b/drivers/pci/pcie/aer.c
> > @@ -946,14 +946,104 @@ static bool find_source_device(struct pci_dev *parent,
> >  	return true;
> >  }
> >  
> > +#ifdef CONFIG_PCIEAER_CXL
> > +
> > +static bool is_cxl_mem_dev(struct pci_dev *dev)
> > +{
> > +	/*
> > +	 * The capability, status, and control fields in Device 0,
> > +	 * Function 0 DVSEC control the CXL functionality of the
> > +	 * entire device (CXL 3.0, 8.1.3).
> > +	 */
> > +	if (dev->devfn != PCI_DEVFN(0, 0))
> > +		return false;
> > +
> > +	/*
> > +	 * CXL Memory Devices must have the 502h class code set (CXL
> > +	 * 3.0, 8.1.12.1).
> > +	 */
> > +	if ((dev->class >> 8) != PCI_CLASS_MEMORY_CXL)
> > +		return false;
> > +
> > +	return true;
> > +}
> > +
> > +static bool cxl_error_is_native(struct pci_dev *dev)
> > +{
> > +	struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
> > +
> > +	if (pcie_ports_native)
> > +		return true;
> > +
> > +	return host->native_aer && host->native_cxl_error;
> > +}
> > +
> > +static bool is_internal_error(struct aer_err_info *info)
> > +{
> > +	if (info->severity == AER_CORRECTABLE)
> > +		return info->status & PCI_ERR_COR_INTERNAL;
> > +
> > +	return info->status & PCI_ERR_UNC_INTN;
> > +}
> > +
> > +static int cxl_rch_handle_error_iter(struct pci_dev *dev, void *data)
> > +{
> > +	struct aer_err_info *info = (struct aer_err_info *)data;
> > +	const struct pci_error_handlers *err_handler;
> > +
> > +	if (!is_cxl_mem_dev(dev) || !cxl_error_is_native(dev))
> > +		return 0;
> > +
> > +	/* protect dev->driver */
> > +	device_lock(&dev->dev);
> > +
> > +	err_handler = dev->driver ? dev->driver->err_handler : NULL;
> > +	if (!err_handler)
> > +		goto out;
> > +
> > +	if (info->severity == AER_CORRECTABLE) {
> > +		if (err_handler->cor_error_detected)
> > +			err_handler->cor_error_detected(dev);
> > +	} else if (err_handler->error_detected) {
> > +		if (info->severity == AER_NONFATAL)
> > +			err_handler->error_detected(dev, pci_channel_io_normal);
> > +		else if (info->severity == AER_FATAL)
> > +			err_handler->error_detected(dev, pci_channel_io_frozen);
> > +	}
> > +out:
> > +	device_unlock(&dev->dev);
> > +	return 0;
> > +}
> > +
> > +static void cxl_rch_handle_error(struct pci_dev *dev, struct aer_err_info *info)
> > +{
> > +	/*
> > +	 * CXL downstream ports of a CXL host that is operating in RCD
> > +	 * mode (RCH) signal errors as RCEC internal errors. Forward
> > +	 * them to all CXL devices below the RCEC.
> > +	 *
> > +	 * See CXL 3.0:
> > +	 *   9.11.8 CXL Devices Attached to an RCH
> > +	 *   12.2.1.1 RCH Downstream Port-detected Errors
> > +	 */
> > +	if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_EC &&
> > +	    is_internal_error(info))
> > +		pcie_walk_rcec(dev, cxl_rch_handle_error_iter, info);
> > +}
> > +
> > +#else
> > +static inline void cxl_rch_handle_error(struct pci_dev *dev,
> > +					struct aer_err_info *info) { }
> > +#endif
> > +
> >  /**
> > - * handle_error_source - handle logging error into an event log
> > + * pci_aer_handle_error - handle logging error into an event log
> >   * @dev: pointer to pci_dev data structure of error source device
> >   * @info: comprehensive error information
> >   *
> >   * Invoked when an error being detected by Root Port.
> >   */
> > -static void handle_error_source(struct pci_dev *dev, struct aer_err_info *info)
> > +static void pci_aer_handle_error(struct pci_dev *dev, struct aer_err_info *info)
> >  {
> >  	int aer = dev->aer_cap;
> >  
> > @@ -977,6 +1067,12 @@ static void handle_error_source(struct pci_dev *dev, struct aer_err_info *info)
> >  		pcie_do_recovery(dev, pci_channel_io_normal, aer_root_reset);
> >  	else if (info->severity == AER_FATAL)
> >  		pcie_do_recovery(dev, pci_channel_io_frozen, aer_root_reset);
> > +}
> > +
> > +static void handle_error_source(struct pci_dev *dev, struct aer_err_info *info)
> > +{
> > +	cxl_rch_handle_error(dev, info);
> > +	pci_aer_handle_error(dev, info);
> >  	pci_dev_put(dev);
> >  }
> >  
> > -- 
> > 2.34.1
> > 

Re: [PATCH v4 22/23] PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler

[Bjorn Helgaas]

On Thu, May 25, 2023 at 11:29:58PM +0200, Robert Richter wrote:
> eOn 24.05.23 16:32:35, Bjorn Helgaas wrote:
> > On Tue, May 23, 2023 at 06:22:13PM -0500, Terry Bowman wrote:
> > > From: Robert Richter <rrichter@amd.com>
> > > 
> > > In Restricted CXL Device (RCD) mode a CXL device is exposed as an
> > > RCiEP, but CXL downstream and upstream ports are not enumerated and
> > > not visible in the PCIe hierarchy. Protocol and link errors are sent
> > > to an RCEC.
> > >
> > > Restricted CXL host (RCH) downstream port-detected errors are signaled
> > > as internal AER errors, either Uncorrectable Internal Error (UIE) or
> > > Corrected Internal Errors (CIE). 
> > 
> > From the parallelism with RCD above, I first thought that RCH devices
> > were non-RCD mode and *were* enumerated as part of the PCIe hierarchy,
> > but actually I suspect it's more like the following?
> > 
> >   ... but CXL downstream and upstream ports are not enumerated and not
> >   visible in the PCIe hierarchy.
> > 
> >   Protocol and link errors from these non-enumerated ports are
> >   signaled as internal AER errors ... via a CXL RCEC.
> 
> Exactly, except the RCEC is standard PCIe and also must not
> necessarily on the same PCI bus as the CXL RCiEPs are.

So make it "RCEC" instead of "CXL RCEC", I guess?  PCIe r6.0, sec
7.9.10.3, allows an RCEC to be associated with RCiEPs on different
buses, so nothing to see there.

> > > The error source is the id of the RCEC.
> > 
> > This seems odd; I assume this refers to the RCEC's AER Error Source
> > Identification register, and the ERR_COR or ERR_FATAL/NONFATAL Source
> > Identification would ordinarily be the Requester ID of the RCiEP that
> > "sent" the Error Message.  But you're saying it's actually the ID of
> > the *RCEC*, not the RCiEP?
> 
> Right, the downstream port has its own AER ext capability in
> non-config (io mapped) RCRB register range. Errors originating from
> there are signaled as internal AER errors via the RCEC *with* the
> RCEC's Requester ID. Code walks through all associated CXL endpoints,
> determines the dport and checks its AER.
> 
> There is also an RDPAS structure defined in CXL but that is only a
> different way to provide the RCEC to dport association instead of
> using the RCEC's Endpoint Association Extended Capability. In the end
> we get all associated RCHs and check the AER of all their dports.
> 
> The upstream port is signaled using the RCiEP's AER. CXL spec is
> strict here: "Upstream Port RCRB shall not implement the AER Extended
> Capability." The RCiEP's requestor ID is used then and its config
> space the AER is in.
> 
> CXL.cachemem errors are reported with the RCiEP as requester
> too. Status is in the CXL RAS cap and the UIE or CIE is set
> respectively in the AER status of the RCiEP.
>
> > We're going to call pci_aer_handle_error() as well, to handle the
> > non-internal errors, and I'm pretty sure that path expects the RCiEP
> > ID there.
> > 
> > Whatever the answer, I'm not sure this sentence is actually relevant
> > to this patch, since this patch doesn't read PCI_ERR_ROOT_ERR_SRC or
> > look at struct aer_err_source.id.
> 
> The source id is used in aer_process_err_devices() which finally calls
> handle_error_source() for the device with the requestor id. This is
> the place where cxl_rch_handle_error() checks if it is an RCEC that
> received an internal error and has cxl devices connected to it. Then,
> the request is forwarded to the cxl_mem handler which also needs to
> check the dport now. That is, pcie_walk_rcec() in
> cxl_rch_handle_error() is called with the RCEC's pci handle,
> cxl_rch_handle_error_iter() with the RCiEP's pci handle.

I'm still not sure this is relevant.  Isn't that last sentence just
the way we always use pcie_walk_rcec()?

If there's something *different* here about CXL, and it's important to
this patch, sure.  But I don't see that yet.  Maybe a comment in the
code if you think it's important to clarify something there.

Bjorn

Re: [PATCH v4 22/23] PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler

[Robert Richter]

On 25.05.23 17:01:01, Bjorn Helgaas wrote:
> On Thu, May 25, 2023 at 11:29:58PM +0200, Robert Richter wrote:
> > eOn 24.05.23 16:32:35, Bjorn Helgaas wrote:
> > > On Tue, May 23, 2023 at 06:22:13PM -0500, Terry Bowman wrote:
> > > > From: Robert Richter <rrichter@amd.com>
> > > > 
> > > > In Restricted CXL Device (RCD) mode a CXL device is exposed as an
> > > > RCiEP, but CXL downstream and upstream ports are not enumerated and
> > > > not visible in the PCIe hierarchy. Protocol and link errors are sent
> > > > to an RCEC.
> > > >
> > > > Restricted CXL host (RCH) downstream port-detected errors are signaled
> > > > as internal AER errors, either Uncorrectable Internal Error (UIE) or
> > > > Corrected Internal Errors (CIE). 
> > > 
> > > From the parallelism with RCD above, I first thought that RCH devices
> > > were non-RCD mode and *were* enumerated as part of the PCIe hierarchy,
> > > but actually I suspect it's more like the following?
> > > 
> > >   ... but CXL downstream and upstream ports are not enumerated and not
> > >   visible in the PCIe hierarchy.
> > > 
> > >   Protocol and link errors from these non-enumerated ports are
> > >   signaled as internal AER errors ... via a CXL RCEC.
> > 
> > Exactly, except the RCEC is standard PCIe and also must not
> > necessarily on the same PCI bus as the CXL RCiEPs are.
> 
> So make it "RCEC" instead of "CXL RCEC", I guess?  PCIe r6.0, sec
> 7.9.10.3, allows an RCEC to be associated with RCiEPs on different
> buses, so nothing to see there.

Yes, nothing special. This makes it more difficult to check if the
RCEC has CXL devices connected, but still it is feasible.

> 
> > > > The error source is the id of the RCEC.
> > > 
> > > This seems odd; I assume this refers to the RCEC's AER Error Source
> > > Identification register, and the ERR_COR or ERR_FATAL/NONFATAL Source
> > > Identification would ordinarily be the Requester ID of the RCiEP that
> > > "sent" the Error Message.  But you're saying it's actually the ID of
> > > the *RCEC*, not the RCiEP?
> > 
> > Right, the downstream port has its own AER ext capability in
> > non-config (io mapped) RCRB register range. Errors originating from
> > there are signaled as internal AER errors via the RCEC *with* the
> > RCEC's Requester ID. Code walks through all associated CXL endpoints,
> > determines the dport and checks its AER.
> > 
> > There is also an RDPAS structure defined in CXL but that is only a
> > different way to provide the RCEC to dport association instead of
> > using the RCEC's Endpoint Association Extended Capability. In the end
> > we get all associated RCHs and check the AER of all their dports.
> > 
> > The upstream port is signaled using the RCiEP's AER. CXL spec is
> > strict here: "Upstream Port RCRB shall not implement the AER Extended
> > Capability." The RCiEP's requestor ID is used then and its config
> > space the AER is in.
> > 
> > CXL.cachemem errors are reported with the RCiEP as requester
> > too. Status is in the CXL RAS cap and the UIE or CIE is set
> > respectively in the AER status of the RCiEP.
> >
> > > We're going to call pci_aer_handle_error() as well, to handle the
> > > non-internal errors, and I'm pretty sure that path expects the RCiEP
> > > ID there.
> > > 
> > > Whatever the answer, I'm not sure this sentence is actually relevant
> > > to this patch, since this patch doesn't read PCI_ERR_ROOT_ERR_SRC or
> > > look at struct aer_err_source.id.
> > 
> > The source id is used in aer_process_err_devices() which finally calls
> > handle_error_source() for the device with the requestor id. This is
> > the place where cxl_rch_handle_error() checks if it is an RCEC that
> > received an internal error and has cxl devices connected to it. Then,
> > the request is forwarded to the cxl_mem handler which also needs to
> > check the dport now. That is, pcie_walk_rcec() in
> > cxl_rch_handle_error() is called with the RCEC's pci handle,
> > cxl_rch_handle_error_iter() with the RCiEP's pci handle.
> 
> I'm still not sure this is relevant.  Isn't that last sentence just
> the way we always use pcie_walk_rcec()?
> 
> If there's something *different* here about CXL, and it's important to
> this patch, sure.  But I don't see that yet.  Maybe a comment in the
> code if you think it's important to clarify something there.

The importance I see is that internal errors of an RCEC indicate an
AER error in an RCH's downstream port. Thus, once that happens, all
involved dports must be checked. Internal errors are typically
non-standard and implementation defined, but here it is CXL standard.

-Robert

Re: [PATCH v4 22/23] PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler

[Jonathan Cameron]

On Tue, 23 May 2023 18:22:13 -0500
Terry Bowman <terry.bowman@amd.com> wrote:

> From: Robert Richter <rrichter@amd.com>
> 
> In Restricted CXL Device (RCD) mode a CXL device is exposed as an
> RCiEP, but CXL downstream and upstream ports are not enumerated and
> not visible in the PCIe hierarchy. Protocol and link errors are sent
> to an RCEC.
> 
> Restricted CXL host (RCH) downstream port-detected errors are signaled
> as internal AER errors, either Uncorrectable Internal Error (UIE) or
> Corrected Internal Errors (CIE). The error source is the id of the
> RCEC. A CXL handler must then inspect the error status in various CXL
> registers residing in the dport's component register space (CXL RAS
> capability) or the dport's RCRB (PCIe AER extended capability). [1]
> 
> Errors showing up in the RCEC's error handler must be handled and
> connected to the CXL subsystem. Implement this by forwarding the error
> to all CXL devices below the RCEC. Since the entire CXL device is
> controlled only using PCIe Configuration Space of device 0, function
> 0, only pass it there [2]. The error handling is limited to currently
> supported devices with the Memory Device class code set
> (PCI_CLASS_MEMORY_CXL, 502h), where the handler can be implemented in
> the existing cxl_pci driver. Support of CXL devices (e.g. a CXL.cache
> device) can be enabled later.
> 
> In addition to errors directed to the CXL endpoint device, a handler
> must also inspect the CXL RAS and PCIe AER capabilities of the CXL
> downstream port that is connected to the device.
> 
> Since CXL downstream port errors are signaled using internal errors,
> the handler requires those errors to be unmasked. This is subject of a
> follow-on patch.
> 
> The reason for choosing this implementation is that a CXL RCEC device
> is bound to the AER port driver, but the driver does not allow it to
> register a custom specific handler to support CXL. Connecting the RCEC
> hard-wired with a CXL handler does not work, as the CXL subsystem
> might not be present all the time. The alternative to add an
> implementation to the portdrv to allow the registration of a custom
> RCEC error handler isn't worth doing it as CXL would be its only user.
> Instead, just check for an CXL RCEC and pass it down to the connected
> CXL device's error handler. With this approach the code can entirely
> be implemented in the PCIe AER driver and is independent of the CXL
> subsystem. The CXL driver only provides the handler.
> 
> [1] CXL 3.0 spec, 12.2.1.1 RCH Downstream Port-detected Errors
> [2] CXL 3.0 spec, 8.1.3 PCIe DVSEC for CXL Devices
> 
> Co-developed-by: Terry Bowman <terry.bowman@amd.com>
> Signed-off-by: Terry Bowman <terry.bowman@amd.com>
> Signed-off-by: Robert Richter <rrichter@amd.com>
> Cc: "Oliver O'Halloran" <oohall@gmail.com>
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> Cc: linuxppc-dev@lists.ozlabs.org
> Cc: linux-pci@vger.kernel.org
> ---
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>