Linux PCI subsystem development
 help / color / mirror / Atom feed
* [PATCH v2 0/3] PCI/PM: Keep hotplug ports that can't wake from D3hot out of D3
@ 2026-11-16 16:51 Aviv Bakal
  2026-11-16 16:51 ` [PATCH v2 1/3] PCI/PM: Honor PCI_DEV_FLAGS_NO_D3 in pci_bridge_d3_possible() Aviv Bakal
                   ` (2 more replies)
  0 siblings, 3 replies; 8+ messages in thread
From: Aviv Bakal @ 2026-11-16 16:51 UTC (permalink / raw)
  To: Bjorn Helgaas
  Cc: Manivannan Sadhasivam, Lukas Wunner, Kuppuswamy Sathyanarayanan,
	linux-pci, linux-kernel, Zeev Zilberman

d4c79b63d82d ("PCI: Allow D3 for native hotplug-capable Root Ports on
non-x86 platforms") lets native pciehp ports runtime suspend to D3hot
on non-x86. The PCIe switch ports on AWS instances advertise PME from
D3hot but do not send it, so hotplug events such as an ENI attach are
lost on Graviton. x86 keeps the old logic, so the problem does not show
up there.

Patches 1-2 handle existing switch devices, which advertise PME:
patch 1 makes pci_bridge_d3_possible() honor PCI_DEV_FLAGS_NO_D3, and
patch 2 sets that flag on the Amazon switch ports.

Patch 3 handles switch devices that advertise no PME from D3hot: such
hotplug ports are kept out of D3.

Changes in v2:
- Patch 1: check a copy of NO_D3 taken in pci_pm_init(), so
  pci_bridge_d3_possible() does not change when a FINAL fixup sets
  the flag after portdrv has probed.
- Patch 2: reuse quirk_no_ata_d3(), renamed to quirk_no_d3().

v1: https://lore.kernel.org/all/20261115171831.1498006-1-avivb@amazon.com/

Aviv Bakal (3):
  PCI/PM: Honor PCI_DEV_FLAGS_NO_D3 in pci_bridge_d3_possible()
  PCI: Avoid runtime D3 on Amazon PCIe switch ports
  PCI/PM: Keep hotplug ports out of D3 if they can't signal PME from
    D3hot

 drivers/pci/pci.c    | 22 +++++++++++++++++++++-
 drivers/pci/quirks.c | 20 ++++++++++++++------
 include/linux/pci.h  |  1 +
 3 files changed, 36 insertions(+), 7 deletions(-)


base-commit: 23c62304dde29abe92013d85910d03a77dada35d
-- 
2.50.1


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v2 1/3] PCI/PM: Honor PCI_DEV_FLAGS_NO_D3 in pci_bridge_d3_possible()
  2026-11-16 16:51 [PATCH v2 0/3] PCI/PM: Keep hotplug ports that can't wake from D3hot out of D3 Aviv Bakal
@ 2026-11-16 16:51 ` Aviv Bakal
  2026-11-16 17:11   ` sashiko-bot
  2026-11-16 17:47   ` Kuppuswamy Sathyanarayanan
  2026-11-16 16:51 ` [PATCH v2 2/3] PCI: Avoid runtime D3 on Amazon PCIe switch ports Aviv Bakal
  2026-11-16 16:51 ` [PATCH v2 3/3] PCI/PM: Keep hotplug ports out of D3 if they can't signal PME from D3hot Aviv Bakal
  2 siblings, 2 replies; 8+ messages in thread
From: Aviv Bakal @ 2026-11-16 16:51 UTC (permalink / raw)
  To: Bjorn Helgaas
  Cc: Manivannan Sadhasivam, Lukas Wunner, Kuppuswamy Sathyanarayanan,
	linux-pci, linux-kernel, Zeev Zilberman, stable

pci_set_power_state() does not put a device with PCI_DEV_FLAGS_NO_D3
into D3, but pci_bridge_d3_possible() ignores the flag.
pcie_portdrv_probe() therefore enables runtime PM on such a port, and
on runtime suspend pciehp masks the hotplug interrupt while the port
stays in D0.

Return false from pci_bridge_d3_possible() when the flag is set.
pci_bridge_d3_possible() must return the same value for the lifetime
of the device, and FINAL fixups may set the flag after portdrv has
probed, so record the flag in pci_pm_init() and check that copy.

Fixes: d4c79b63d82d ("PCI: Allow D3 for native hotplug-capable Root Ports on non-x86 platforms")
Cc: stable@vger.kernel.org # 7.3.x
Co-developed-by: Zeev Zilberman <zeev@amazon.com>
Signed-off-by: Zeev Zilberman <zeev@amazon.com>
Signed-off-by: Aviv Bakal <avivb@amazon.com>
---
 drivers/pci/pci.c   | 10 ++++++++++
 include/linux/pci.h |  1 +
 2 files changed, 11 insertions(+)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 7c6f2aba8144..eb7f2f03d9ae 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3055,6 +3055,10 @@ bool pci_bridge_d3_possible(struct pci_dev *bridge)
 		if (pci_bridge_d3_disable)
 			return false;
 
+		/* The port is known not to work correctly in D3 */
+		if (bridge->no_d3)
+			return false;
+
 		/*
 		 * Hotplug ports handled by platform firmware may not be put
 		 * into D3 by the OS, e.g. ACPI slots ...
@@ -3227,6 +3231,12 @@ void pci_pm_init(struct pci_dev *dev)
 	dev->pm_cap = 0;
 	dev->pme_support = 0;
 
+	/*
+	 * pci_bridge_d3_possible() must not change after this point, so
+	 * ignore NO_D3 set by later fixups.
+	 */
+	dev->no_d3 = !!(dev->dev_flags & PCI_DEV_FLAGS_NO_D3);
+
 	/* find PCI PM capability in list */
 	pm = pci_find_capability(dev, PCI_CAP_ID_PM);
 	if (!pm)
diff --git a/include/linux/pci.h b/include/linux/pci.h
index aa3765a20a96..1238667d643c 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -420,6 +420,7 @@ struct pci_dev {
 	unsigned int	no_d1d2:1;	/* D1 and D2 are forbidden */
 	unsigned int	no_d3cold:1;	/* D3cold is forbidden */
 	unsigned int	bridge_d3:1;	/* Allow D3 for bridge */
+	unsigned int	no_d3:1;	/* NO_D3 set before PM init */
 	unsigned int	d3cold_allowed:1;	/* D3cold is allowed by user */
 	unsigned int	mmio_always_on:1;	/* Disallow turning off io/mem
 						   decoding during BAR sizing */
-- 
2.50.1


^ permalink raw reply related	[flat|nested] 8+ messages in thread

* [PATCH v2 2/3] PCI: Avoid runtime D3 on Amazon PCIe switch ports
  2026-11-16 16:51 [PATCH v2 0/3] PCI/PM: Keep hotplug ports that can't wake from D3hot out of D3 Aviv Bakal
  2026-11-16 16:51 ` [PATCH v2 1/3] PCI/PM: Honor PCI_DEV_FLAGS_NO_D3 in pci_bridge_d3_possible() Aviv Bakal
@ 2026-11-16 16:51 ` Aviv Bakal
  2026-11-16 16:58   ` sashiko-bot
  2026-11-16 16:51 ` [PATCH v2 3/3] PCI/PM: Keep hotplug ports out of D3 if they can't signal PME from D3hot Aviv Bakal
  2 siblings, 1 reply; 8+ messages in thread
From: Aviv Bakal @ 2026-11-16 16:51 UTC (permalink / raw)
  To: Bjorn Helgaas
  Cc: Manivannan Sadhasivam, Lukas Wunner, Kuppuswamy Sathyanarayanan,
	linux-pci, linux-kernel, Zeev Zilberman, stable

The PCIe switch ports on AWS instances (vendor 0x1d0f) advertise PME
from D3hot but do not send it. Since commit d4c79b63d82d ("PCI: Allow
D3 for native hotplug-capable Root Ports on non-x86 platforms") these
ports runtime suspend to D3hot on non-x86 platforms, and hotplug events
such as an ENI attach are lost.

Mark them PCI_DEV_FLAGS_NO_D3, reusing quirk_no_ata_d3() renamed to
quirk_no_d3().

Fixes: d4c79b63d82d ("PCI: Allow D3 for native hotplug-capable Root Ports on non-x86 platforms")
Cc: stable@vger.kernel.org # 7.3.x
Co-developed-by: Zeev Zilberman <zeev@amazon.com>
Signed-off-by: Zeev Zilberman <zeev@amazon.com>
Signed-off-by: Aviv Bakal <avivb@amazon.com>
---
 drivers/pci/quirks.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 7f1f47ea2ee4..338e884126fb 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1458,23 +1458,31 @@ static void quirk_ide_samemode(struct pci_dev *pdev)
 }
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode);
 
-/* Some ATA devices break if put into D3 */
-static void quirk_no_ata_d3(struct pci_dev *pdev)
+/* Some devices break if put into D3 */
+static void quirk_no_d3(struct pci_dev *pdev)
 {
 	pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3;
 }
 /* Quirk the legacy ATA devices only. The AHCI ones are ok */
 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID,
-				PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3);
+				PCI_CLASS_STORAGE_IDE, 8, quirk_no_d3);
 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID,
-				PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3);
+				PCI_CLASS_STORAGE_IDE, 8, quirk_no_d3);
 /* ALi loses some register settings that we cannot then restore */
 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID,
-				PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3);
+				PCI_CLASS_STORAGE_IDE, 8, quirk_no_d3);
 /* VIA comes back fine but we need to keep it alive or ACPI GTM failures
    occur when mode detecting */
 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID,
-				PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3);
+				PCI_CLASS_STORAGE_IDE, 8, quirk_no_d3);
+
+/*
+ * Amazon 1d0f PCIe switch ports (e.g. 1d0f:cec2) on AWS instances
+ * advertise PME# from D3hot but never assert it, so hotplug events on
+ * a port in D3 are lost.
+ */
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AMAZON, PCI_ANY_ID,
+			      PCI_CLASS_BRIDGE_PCI, 8, quirk_no_d3);
 
 /*
  * This was originally an Alpha-specific thing, but it really fits here.
-- 
2.50.1


^ permalink raw reply related	[flat|nested] 8+ messages in thread

* [PATCH v2 3/3] PCI/PM: Keep hotplug ports out of D3 if they can't signal PME from D3hot
  2026-11-16 16:51 [PATCH v2 0/3] PCI/PM: Keep hotplug ports that can't wake from D3hot out of D3 Aviv Bakal
  2026-11-16 16:51 ` [PATCH v2 1/3] PCI/PM: Honor PCI_DEV_FLAGS_NO_D3 in pci_bridge_d3_possible() Aviv Bakal
  2026-11-16 16:51 ` [PATCH v2 2/3] PCI: Avoid runtime D3 on Amazon PCIe switch ports Aviv Bakal
@ 2026-11-16 16:51 ` Aviv Bakal
  2026-11-16 17:04   ` sashiko-bot
  2 siblings, 1 reply; 8+ messages in thread
From: Aviv Bakal @ 2026-11-16 16:51 UTC (permalink / raw)
  To: Bjorn Helgaas
  Cc: Manivannan Sadhasivam, Lukas Wunner, Kuppuswamy Sathyanarayanan,
	linux-pci, linux-kernel, Zeev Zilberman

On runtime suspend pciehp masks the hotplug interrupt and relies on
PME to resume the port on a slot event. pci_bridge_d3_possible() does
not check whether the port can signal PME from D3hot, so a port that
cannot is not resumed by slot events.

Return false from pci_bridge_d3_possible() for such native hotplug
ports. pci_pm_init() computes bridge_d3 before it reads PME_Support,
so move that assignment after dev->pme_support is set.

Co-developed-by: Zeev Zilberman <zeev@amazon.com>
Signed-off-by: Zeev Zilberman <zeev@amazon.com>
Signed-off-by: Aviv Bakal <avivb@amazon.com>
---
 drivers/pci/pci.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index eb7f2f03d9ae..fa37dd3067cf 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3081,6 +3081,14 @@ bool pci_bridge_d3_possible(struct pci_dev *bridge)
 		if (platform_pci_bridge_d3(bridge))
 			return true;
 
+		/*
+		 * pciehp masks the hotplug interrupt on runtime suspend and
+		 * relies on PME to resume the port on a slot event. A port
+		 * that cannot signal PME from D3hot is not resumed.
+		 */
+		if (bridge->is_pciehp && !pci_pme_capable(bridge, PCI_D3hot))
+			return false;
+
 		/*
 		 * Hotplug ports handled natively by the OS on x86 platforms
 		 * were not validated by vendors for runtime D3 at least until
@@ -3253,7 +3261,6 @@ void pci_pm_init(struct pci_dev *dev)
 	dev->pm_cap = pm;
 	dev->d3hot_delay = PCI_PM_D3HOT_WAIT;
 	dev->d3cold_delay = PCI_PM_D3COLD_WAIT;
-	dev->bridge_d3 = pci_bridge_d3_possible(dev);
 	dev->d3cold_allowed = true;
 
 	dev->d1_support = false;
@@ -3289,6 +3296,9 @@ void pci_pm_init(struct pci_dev *dev)
 		pci_pme_active(dev, false);
 	}
 
+	/* pci_bridge_d3_possible() looks at pme_support */
+	dev->bridge_d3 = pci_bridge_d3_possible(dev);
+
 poweron:
 	pci_update_current_state(dev, PCI_UNKNOWN);
 	if (dev->current_state == PCI_D0) {
-- 
2.50.1


^ permalink raw reply related	[flat|nested] 8+ messages in thread

* Re: [PATCH v2 2/3] PCI: Avoid runtime D3 on Amazon PCIe switch ports
  2026-11-16 16:51 ` [PATCH v2 2/3] PCI: Avoid runtime D3 on Amazon PCIe switch ports Aviv Bakal
@ 2026-11-16 16:58   ` sashiko-bot
  0 siblings, 0 replies; 8+ messages in thread
From: sashiko-bot @ 2026-11-16 16:58 UTC (permalink / raw)
  To: Aviv Bakal; +Cc: linux-pci

> The PCIe switch ports on AWS instances (vendor 0x1d0f) advertise PME
> from D3hot but do not send it. Since commit d4c79b63d82d ("PCI: Allow
> D3 for native hotplug-capable Root Ports on non-x86 platforms") these
> ports runtime suspend to D3hot on non-x86 platforms, and hotplug events
> such as an ENI attach are lost.
> 
> Mark them PCI_DEV_FLAGS_NO_D3, reusing quirk_no_ata_d3() renamed to
> quirk_no_d3().
> 
> Fixes: d4c79b63d82d ("PCI: Allow D3 for native hotplug-capable Root Ports on non-x86 platforms")
> Cc: stable@vger.kernel.org # 7.3.x
> Co-developed-by: Zeev Zilberman <zeev@amazon.com>
> Signed-off-by: Zeev Zilberman <zeev@amazon.com>
> Signed-off-by: Aviv Bakal <avivb@amazon.com>

Sashiko has reviewed this patch and found no issues.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261116165110.2773301-1-avivb@amazon.com?part=2


^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v2 3/3] PCI/PM: Keep hotplug ports out of D3 if they can't signal PME from D3hot
  2026-11-16 16:51 ` [PATCH v2 3/3] PCI/PM: Keep hotplug ports out of D3 if they can't signal PME from D3hot Aviv Bakal
@ 2026-11-16 17:04   ` sashiko-bot
  0 siblings, 0 replies; 8+ messages in thread
From: sashiko-bot @ 2026-11-16 17:04 UTC (permalink / raw)
  To: Aviv Bakal; +Cc: linux-pci

Thank you for your contribution! Sashiko AI review found 1 potential
issue to consider:
- [Low] PCI/PM: missing Fixes trailer for commit d4c79b63d82d in commit
  message
--

commit 70281f514dfa84e338f2e7558fdf02d6a96db4d6
Author: Aviv Bakal <avivb@amazon.com>

> PCI/PM: Keep hotplug ports out of D3 if they can't signal PME from D3hot
>
> On runtime suspend pciehp masks the hotplug interrupt and relies on
> PME to resume the port on a slot event. pci_bridge_d3_possible() does
> not check whether the port can signal PME from D3hot, so a port that
> cannot is not resumed by slot events.
>
> Return false from pci_bridge_d3_possible() for such native hotplug
> ports. pci_pm_init() computes bridge_d3 before it reads PME_Support,
> so move that assignment after dev->pme_support is set.
>
> Co-developed-by: Zeev Zilberman <zeev@amazon.com>
> Signed-off-by: Zeev Zilberman <zeev@amazon.com>
> Signed-off-by: Aviv Bakal <avivb@amazon.com>

[Severity: Low]
This fixes a regression on non-x86 native hotplug ports that cannot
signal PME from D3hot, which were allowed into D3 by commit d4c79b63d82d
("PCI: Allow D3 for native hotplug-capable Root Ports on non-x86
platforms").  Should this include:

  Fixes: d4c79b63d82d ("PCI: Allow D3 for native hotplug-capable Root Ports on non-x86 platforms")

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261116165110.2773301-1-avivb@amazon.com?part=3

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v2 1/3] PCI/PM: Honor PCI_DEV_FLAGS_NO_D3 in pci_bridge_d3_possible()
  2026-11-16 16:51 ` [PATCH v2 1/3] PCI/PM: Honor PCI_DEV_FLAGS_NO_D3 in pci_bridge_d3_possible() Aviv Bakal
@ 2026-11-16 17:11   ` sashiko-bot
  2026-11-16 17:47   ` Kuppuswamy Sathyanarayanan
  1 sibling, 0 replies; 8+ messages in thread
From: sashiko-bot @ 2026-11-16 17:11 UTC (permalink / raw)
  To: Aviv Bakal; +Cc: linux-pci

> pci_set_power_state() does not put a device with PCI_DEV_FLAGS_NO_D3
> into D3, but pci_bridge_d3_possible() ignores the flag.
> pcie_portdrv_probe() therefore enables runtime PM on such a port, and
> on runtime suspend pciehp masks the hotplug interrupt while the port
> stays in D0.
> 
> Return false from pci_bridge_d3_possible() when the flag is set.
> pci_bridge_d3_possible() must return the same value for the lifetime
> of the device, and FINAL fixups may set the flag after portdrv has
> probed, so record the flag in pci_pm_init() and check that copy.
> 
> Fixes: d4c79b63d82d ("PCI: Allow D3 for native hotplug-capable Root Ports on non-x86 platforms")
> Cc: stable@vger.kernel.org # 7.3.x
> Co-developed-by: Zeev Zilberman <zeev@amazon.com>
> Signed-off-by: Zeev Zilberman <zeev@amazon.com>
> Signed-off-by: Aviv Bakal <avivb@amazon.com>

Sashiko has reviewed this patch and found no issues.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261116165110.2773301-1-avivb@amazon.com?part=1


^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v2 1/3] PCI/PM: Honor PCI_DEV_FLAGS_NO_D3 in pci_bridge_d3_possible()
  2026-11-16 16:51 ` [PATCH v2 1/3] PCI/PM: Honor PCI_DEV_FLAGS_NO_D3 in pci_bridge_d3_possible() Aviv Bakal
  2026-11-16 17:11   ` sashiko-bot
@ 2026-11-16 17:47   ` Kuppuswamy Sathyanarayanan
  1 sibling, 0 replies; 8+ messages in thread
From: Kuppuswamy Sathyanarayanan @ 2026-11-16 17:47 UTC (permalink / raw)
  To: Aviv Bakal, Bjorn Helgaas
  Cc: Manivannan Sadhasivam, Lukas Wunner, linux-pci, linux-kernel,
	Zeev Zilberman, stable



On 11/16/26 08:51, Aviv Bakal wrote:
> pci_set_power_state() does not put a device with PCI_DEV_FLAGS_NO_D3
> into D3, but pci_bridge_d3_possible() ignores the flag.
> pcie_portdrv_probe() therefore enables runtime PM on such a port, and
> on runtime suspend pciehp masks the hotplug interrupt while the port
> stays in D0.
> 
> Return false from pci_bridge_d3_possible() when the flag is set.
> pci_bridge_d3_possible() must return the same value for the lifetime
> of the device, and FINAL fixups may set the flag after portdrv has
> probed, so record the flag in pci_pm_init() and check that copy.
> 
> Fixes: d4c79b63d82d ("PCI: Allow D3 for native hotplug-capable Root Ports on non-x86 platforms")
> Cc: stable@vger.kernel.org # 7.3.x
> Co-developed-by: Zeev Zilberman <zeev@amazon.com>
> Signed-off-by: Zeev Zilberman <zeev@amazon.com>
> Signed-off-by: Aviv Bakal <avivb@amazon.com>
> ---
>  drivers/pci/pci.c   | 10 ++++++++++
>  include/linux/pci.h |  1 +
>  2 files changed, 11 insertions(+)
> 
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index 7c6f2aba8144..eb7f2f03d9ae 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -3055,6 +3055,10 @@ bool pci_bridge_d3_possible(struct pci_dev *bridge)
>  		if (pci_bridge_d3_disable)
>  			return false;
>  
> +		/* The port is known not to work correctly in D3 */
> +		if (bridge->no_d3)
> +			return false;
> +
>  		/*
>  		 * Hotplug ports handled by platform firmware may not be put
>  		 * into D3 by the OS, e.g. ACPI slots ...
> @@ -3227,6 +3231,12 @@ void pci_pm_init(struct pci_dev *dev)
>  	dev->pm_cap = 0;
>  	dev->pme_support = 0;
>  
> +	/*
> +	 * pci_bridge_d3_possible() must not change after this point, so
> +	 * ignore NO_D3 set by later fixups.
> +	 */
> +	dev->no_d3 = !!(dev->dev_flags & PCI_DEV_FLAGS_NO_D3);

This ignores quirk_plx_pex_no_d3(). It is the only other quirk that
sets NO_D3 on a PCIe port, and it is a FINAL fixup. So
pci_bridge_d3_possible() still returns true for those PLX downstream
ports, and portdrv still enables runtime PM on them.

> +
>  	/* find PCI PM capability in list */
>  	pm = pci_find_capability(dev, PCI_CAP_ID_PM);
>  	if (!pm)
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index aa3765a20a96..1238667d643c 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -420,6 +420,7 @@ struct pci_dev {
>  	unsigned int	no_d1d2:1;	/* D1 and D2 are forbidden */
>  	unsigned int	no_d3cold:1;	/* D3cold is forbidden */
>  	unsigned int	bridge_d3:1;	/* Allow D3 for bridge */
> +	unsigned int	no_d3:1;	/* NO_D3 set before PM init */
>  	unsigned int	d3cold_allowed:1;	/* D3cold is allowed by user */
>  	unsigned int	mmio_always_on:1;	/* Disallow turning off io/mem
>  						   decoding during BAR sizing */

-- 
Sathyanarayanan Kuppuswamy
Linux Kernel Developer


^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2026-11-16 17:47 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-16 16:51 [PATCH v2 0/3] PCI/PM: Keep hotplug ports that can't wake from D3hot out of D3 Aviv Bakal
2026-11-16 16:51 ` [PATCH v2 1/3] PCI/PM: Honor PCI_DEV_FLAGS_NO_D3 in pci_bridge_d3_possible() Aviv Bakal
2026-11-16 17:11   ` sashiko-bot
2026-11-16 17:47   ` Kuppuswamy Sathyanarayanan
2026-11-16 16:51 ` [PATCH v2 2/3] PCI: Avoid runtime D3 on Amazon PCIe switch ports Aviv Bakal
2026-11-16 16:58   ` sashiko-bot
2026-11-16 16:51 ` [PATCH v2 3/3] PCI/PM: Keep hotplug ports out of D3 if they can't signal PME from D3hot Aviv Bakal
2026-11-16 17:04   ` sashiko-bot

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox