Re: [PATCH v3 2/3] arm64: dts: qcom: qcs615: add UFS node

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 22.11.2024 7:44 AM, Xin Liu wrote:
> From: Sayali Lokhande <quic_sayalil@quicinc.com>
> 
> Add the UFS Host Controller node and its PHY for QCS615 SoC.
> 
> Signed-off-by: Sayali Lokhande <quic_sayalil@quicinc.com>
> Co-developed-by: Xin Liu <quic_liuxin@quicinc.com>
> Signed-off-by: Xin Liu <quic_liuxin@quicinc.com>
> ---

[...]

> +
> +			operating-points-v2 = <&ufs_opp_table>;
> +			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
> +					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
> +					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> +					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;

QCOM_ICC_TAG_ACTIVE_ONLY for the cpu path

> +			interconnect-names = "ufs-ddr",
> +					     "cpu-ufs";
> +
> +			power-domains = <&gcc UFS_PHY_GDSC>;
> +			required-opps = <&rpmhpd_opp_nom>;

this contradicts the levels in the OPP table:

> +
> +			iommus = <&apps_smmu 0x300 0x0>;
> +			dma-coherent;
> +
> +			lanes-per-direction = <1>;
> +
> +			phys = <&ufs_mem_phy>;
> +			phy-names = "ufsphy";
> +
> +			#reset-cells = <1>;
> +
> +			status = "disabled";
> +
> +			ufs_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-50000000 {
> +					opp-hz = /bits/ 64 <50000000>,
> +						 /bits/ 64 <0>,
> +						 /bits/ 64 <0>,
> +						 /bits/ 64 <37500000>,
> +						 /bits/ 64 <75000000>,
> +						 /bits/ 64 <0>,
> +						 /bits/ 64 <0>,
> +						 /bits/ 64 <0>;
> +					required-opps = <&rpmhpd_opp_low_svs>;
> +				};
> +

Konrad

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy