Linux-PHY Archive on lore.kernel.org

* [PATCH v3 4/6] phy: rockchip: samsung-hdptx: Drop restrict_rate_change handling
From: Cristian Ciocaltea @ 2026-06-11 12:31 UTC (permalink / raw)
  To: Vinod Koul, Neil Armstrong, Heiko Stuebner, Algea Cao,
	Dmitry Baryshkov
  Cc: kernel, linux-phy, linux-arm-kernel, linux-rockchip, linux-kernel,
	Thomas Niederprüm, Simon Wright
In-Reply-To: <20260611-hdptx-clk-fixes-v3-0-67b1b0c00e16@collabora.com>

Since commit 6efbd0f46dd8 ("phy: rockchip: samsung-hdptx: Restrict
altering TMDS char rate via CCF"), adjusting the rate via the Common
Clock Framework API has been disallowed.

To avoid breaking existing users until switching to the PHY config API,
it introduced a temporary exception to the rule, controlled via the
'restrict_rate_change' flag.

As the API transition completed, remove the now deprecated exception
logic.

Tested-by: Thomas Niederprüm <dubito@online.de>
Tested-by: Simon Wright <simon@symple.nz>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c | 42 +++++------------------
 1 file changed, 8 insertions(+), 34 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
index 92c77e58518c..529dd2d5d9bd 100644
--- a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
+++ b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
@@ -414,7 +414,6 @@ struct rk_hdptx_phy {
 	/* clk provider */
 	struct clk_hw hw;
 	bool pll_config_dirty;
-	bool restrict_rate_change;
 
 	atomic_t usage_count;
 
@@ -2074,7 +2073,6 @@ static int rk_hdptx_phy_configure(struct phy *phy, union phy_configure_opts *opt
 		if (ret) {
 			dev_err(hdptx->dev, "invalid hdmi params for phy configure\n");
 		} else {
-			hdptx->restrict_rate_change = true;
 			hdptx->pll_config_dirty = true;
 
 			dev_dbg(hdptx->dev, "%s %s rate=%llu bpc=%u\n", __func__,
@@ -2301,41 +2299,17 @@ static int rk_hdptx_phy_clk_determine_rate(struct clk_hw *hw,
 	struct rk_hdptx_phy *hdptx = to_rk_hdptx_phy(hw);
 
 	/*
-	 * Invalidate current clock rate to ensure rk_hdptx_phy_clk_set_rate()
-	 * will be invoked to commit PLL configuration.
+	 * For uncommitted PLL configuration, invalidate the current clock rate
+	 * to ensure rk_hdptx_phy_clk_set_rate() will be always invoked.
+	 * Otherwise, restrict the rate according to the PHY link setup.
 	 */
-	if (hdptx->pll_config_dirty) {
+	if (hdptx->pll_config_dirty)
 		req->rate = 0;
-		return 0;
-	}
-
-	if (hdptx->hdmi_cfg.mode == PHY_HDMI_MODE_FRL) {
+	else if (hdptx->hdmi_cfg.mode == PHY_HDMI_MODE_FRL)
 		req->rate = hdptx->hdmi_cfg.rate;
-		return 0;
-	}
-
-	/*
-	 * FIXME: Temporarily allow altering TMDS char rate via CCF.
-	 * To be dropped as soon as the RK DW HDMI QP bridge driver
-	 * switches to make use of phy_configure().
-	 */
-	if (!hdptx->restrict_rate_change && req->rate != hdptx->hdmi_cfg.rate) {
-		struct phy_configure_opts_hdmi hdmi = {
-			.tmds_char_rate = req->rate,
-		};
-
-		int ret = rk_hdptx_phy_verify_hdmi_config(hdptx, &hdmi, &hdptx->hdmi_cfg);
-
-		if (ret)
-			return ret;
-	}
-
-	/*
-	 * The TMDS char rate shall be adjusted via phy_configure() only,
-	 * hence ensure rk_hdptx_phy_clk_set_rate() won't be invoked with
-	 * a different rate argument.
-	 */
-	req->rate = DIV_ROUND_CLOSEST_ULL(hdptx->hdmi_cfg.rate * 8, hdptx->hdmi_cfg.bpc);
+	else
+		req->rate = DIV_ROUND_CLOSEST_ULL(hdptx->hdmi_cfg.rate * 8,
+						  hdptx->hdmi_cfg.bpc);
 
 	return 0;
 }

-- 
2.54.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

^ permalink raw reply related