Re: [PATCH v2 0/5] Improve s0ix flows for systems i219LM

[Bjorn Helgaas <helgaas@kernel.org>]

On Wed, Dec 02, 2020 at 07:24:28PM +0000, Limonciello, Mario wrote:
> > -----Original Message-----
> > From: Jakub Kicinski <kuba@kernel.org>
> > Sent: Wednesday, December 2, 2020 13:07
> > To: Limonciello, Mario
> > Cc: Tony Nguyen; intel-wired-lan@lists.osuosl.org; Linux PM; Netdev; Alexander
> > Duyck; Sasha Netfin; Aaron Brown; Stefan Assmann; David Miller;
> > darcari@redhat.com; Shen, Yijun; Yuan, Perry
> > Subject: Re: [PATCH v2 0/5] Improve s0ix flows for systems i219LM
> > 
> > 
> > [EXTERNAL EMAIL]
> > 
> > On Wed,  2 Dec 2020 10:17:43 -0600 Mario Limonciello wrote:
> > > commit e086ba2fccda ("e1000e: disable s0ix entry and exit flows for ME
> > systems")
> > > disabled s0ix flows for systems that have various incarnations of the
> > > i219-LM ethernet controller.  This was done because of some regressions
> > > caused by an earlier
> > > commit 632fbd5eb5b0e ("e1000e: fix S0ix flows for cable connected case")
> > > with i219-LM controller.
> > >
> > > Performing suspend to idle with these ethernet controllers requires a
> > properly
> > > configured system.  To make enabling such systems easier, this patch
> > > series allows turning on using ethtool.
> > >
> > > The flows have also been confirmed to be configured correctly on Dell's
> > Latitude
> > > and Precision CML systems containing the i219-LM controller, when the kernel
> > also
> > > contains the fix for s0i3.2 entry previously submitted here:
> > > https://marc.info/?l=linux-netdev&m=160677194809564&w=2
> > >
> > > Patches 3 and 4 will turn the behavior on by default for Dell's CML systems.
> > > Patch 5 allows accessing the value of the flags via ethtool to tell if the
> > > heuristics have turned on s0ix flows, as well as for development purposes
> > > to determine if a system should be added to the heuristics list.
> > 
> > I don't see PCI or Bjorn Helgaas CCed.
> > 
> > You can drop linux-kernel tho.
> 
> Correct, that was intentional that PCI (and Bjorn) weren't added.  Since I came
> up with a way to detect platforms without DMI as suggested and this is entirely
> controlling a driver behavior within e1000e only on systems with i219-LM I
> didn't think that PCI ML was actually needed.
> 
> Since you disagree, I'll add Bjorn into this thread.
> 
> @Bjorn Helgaas,
> 
> Apologies that you're looped in this way rather than directly to the submission,
> but the cover letter is above and the patch series can be viewed at this patchwork
> if you would like to fetch the mbox and respond to provide any comments.
> 
> https://patchwork.ozlabs.org/project/netdev/list/?series=218121
> 
> I'll include you directly if any future v3 is necessary.

No need, I don't think.  AFAICT there's nothing there related to the
PCI core.  Thanks!

Bjorn