From: NeilBrown <neilb@suse.com>
To: Shaohua Li <shli@kernel.org>
Cc: linux-raid@vger.kernel.org, hch@lst.de
Subject: [md PATCH 06/14] md/raid5: remove over-loading of ->bi_phys_segments.
Date: Thu, 16 Feb 2017 15:39:02 +1100 [thread overview]
Message-ID: <148721994202.7521.13464645140160274861.stgit@noble> (raw)
In-Reply-To: <148721992248.7521.17160361058957519076.stgit@noble>
When a read request, which bypassed the cache, fails, we need to retry
it through the cache.
This involves attaching it to a sequence of stripe_heads, and it may not
be possible to get all the stripe_heads we need at once.
We do what we can, and record how far we got in ->bi_phys_segments so
we can pick up again later.
There is only ever one bio which may have a non-zero offset stored in
->bi_phys_segments, the one that is either active in the single thread
which calls retry_aligned_read(), or is in conf->retry_read_aligned
waiting for retry_aligned_read() to be called again.
So we only need to store one offset value. This can be in a local
variable passed between remove_bio_from_retry() and
retry_aligned_read(), or in the r5conf structure next to the
->retry_read_aligned pointer.
Storing it there allows the last usage of ->bi_phys_segments to be
removed from md/raid5.c.
Signed-off-by: NeilBrown <neilb@suse.com>
---
drivers/md/raid5.c | 24 ++++++++++++------------
drivers/md/raid5.h | 30 +-----------------------------
2 files changed, 13 insertions(+), 41 deletions(-)
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 905abf081acf..f93e8fddbb23 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -4883,12 +4883,14 @@ static void add_bio_to_retry(struct bio *bi,struct r5conf *conf)
md_wakeup_thread(conf->mddev->thread);
}
-static struct bio *remove_bio_from_retry(struct r5conf *conf)
+static struct bio *remove_bio_from_retry(struct r5conf *conf,
+ unsigned int *offset)
{
struct bio *bi;
bi = conf->retry_read_aligned;
if (bi) {
+ *offset = conf->retry_read_offset;
conf->retry_read_aligned = NULL;
return bi;
}
@@ -4896,11 +4898,7 @@ static struct bio *remove_bio_from_retry(struct r5conf *conf)
if(bi) {
conf->retry_read_aligned_list = bi->bi_next;
bi->bi_next = NULL;
- /*
- * this sets the active strip count to 1 and the processed
- * strip count to zero (upper 8 bits)
- */
- raid5_set_bi_processed_stripes(bi, 0);
+ *offset = 0;
}
return bi;
@@ -5835,7 +5833,8 @@ static inline sector_t raid5_sync_request(struct mddev *mddev, sector_t sector_n
return STRIPE_SECTORS;
}
-static int retry_aligned_read(struct r5conf *conf, struct bio *raid_bio)
+static int retry_aligned_read(struct r5conf *conf, struct bio *raid_bio,
+ unsigned int offset)
{
/* We may not be able to submit a whole bio at once as there
* may not be enough stripe_heads available.
@@ -5864,7 +5863,7 @@ static int retry_aligned_read(struct r5conf *conf, struct bio *raid_bio)
sector += STRIPE_SECTORS,
scnt++) {
- if (scnt < raid5_bi_processed_stripes(raid_bio))
+ if (scnt < offset)
/* already done this stripe */
continue;
@@ -5872,15 +5871,15 @@ static int retry_aligned_read(struct r5conf *conf, struct bio *raid_bio)
if (!sh) {
/* failed to get a stripe - must wait */
- raid5_set_bi_processed_stripes(raid_bio, scnt);
conf->retry_read_aligned = raid_bio;
+ conf->retry_read_offset = scnt;
return handled;
}
if (!add_stripe_bio(sh, raid_bio, dd_idx, 0, 0)) {
raid5_release_stripe(sh);
- raid5_set_bi_processed_stripes(raid_bio, scnt);
conf->retry_read_aligned = raid_bio;
+ conf->retry_read_offset = scnt;
return handled;
}
@@ -6003,6 +6002,7 @@ static void raid5d(struct md_thread *thread)
while (1) {
struct bio *bio;
int batch_size, released;
+ unsigned int offset;
released = release_stripe_list(conf, conf->temp_inactive_list);
if (released)
@@ -6020,10 +6020,10 @@ static void raid5d(struct md_thread *thread)
}
raid5_activate_delayed(conf);
- while ((bio = remove_bio_from_retry(conf))) {
+ while ((bio = remove_bio_from_retry(conf, &offset))) {
int ok;
spin_unlock_irq(&conf->device_lock);
- ok = retry_aligned_read(conf, bio);
+ ok = retry_aligned_read(conf, bio, offset);
spin_lock_irq(&conf->device_lock);
if (!ok)
break;
diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h
index 3018a33693ab..a4ef02176afb 100644
--- a/drivers/md/raid5.h
+++ b/drivers/md/raid5.h
@@ -480,35 +480,6 @@ static inline struct bio *r5_next_bio(struct bio *bio, sector_t sector)
return NULL;
}
-/*
- * We maintain a count of processed stripes in the upper 16 bits
- */
-static inline int raid5_bi_processed_stripes(struct bio *bio)
-{
- atomic_t *segments = (atomic_t *)&bio->bi_phys_segments;
-
- return (atomic_read(segments) >> 16) & 0xffff;
-}
-
-static inline void raid5_set_bi_processed_stripes(struct bio *bio,
- unsigned int cnt)
-{
- atomic_t *segments = (atomic_t *)&bio->bi_phys_segments;
- int old, new;
-
- do {
- old = atomic_read(segments);
- new = (old & 0xffff) | (cnt << 16);
- } while (atomic_cmpxchg(segments, old, new) != old);
-}
-
-static inline void raid5_set_bi_stripes(struct bio *bio, unsigned int cnt)
-{
- atomic_t *segments = (atomic_t *)&bio->bi_phys_segments;
-
- atomic_set(segments, cnt);
-}
-
/* NOTE NR_STRIPE_HASH_LOCKS must remain below 64.
* This is because we sometimes take all the spinlocks
* and creating that much locking depth can cause
@@ -596,6 +567,7 @@ struct r5conf {
struct list_head delayed_list; /* stripes that have plugged requests */
struct list_head bitmap_list; /* stripes delaying awaiting bitmap update */
struct bio *retry_read_aligned; /* currently retrying aligned bios */
+ unsigned int retry_read_offset; /* sector offset into retry_read_aligned */
struct bio *retry_read_aligned_list; /* aligned bios retry list */
atomic_t preread_active_stripes; /* stripes with scheduled io */
atomic_t active_aligned_reads;
next prev parent reply other threads:[~2017-02-16 4:39 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-16 4:39 [md PATCH 00/14] remove all abuse of bi_phys_segments NeilBrown
2017-02-16 4:39 ` [md PATCH 01/14] md/raid5: use md_write_start to count stripes, not bios NeilBrown
2017-02-16 17:29 ` Shaohua Li
2017-02-17 2:04 ` NeilBrown
2017-02-16 4:39 ` [md PATCH 02/14] md/raid5: simplfy delaying of writes while metadata is updated NeilBrown
2017-02-16 17:37 ` Shaohua Li
2017-02-17 2:10 ` NeilBrown
2017-02-16 4:39 ` [md PATCH 03/14] md/raid5: call bio_endio() directly rather than queueing for later NeilBrown
2017-02-16 4:39 ` [md PATCH 04/14] block: trace completion of all bios NeilBrown
2017-02-16 4:39 ` NeilBrown [this message]
2017-02-16 4:39 ` [md PATCH 05/14] md/raid5: use bio_inc_remaining() instead of repurposing bi_phys_segments as a counter NeilBrown
2017-02-16 4:39 ` [md PATCH 11/14] md/raid5: don't test ->writes_pending in raid5_remove_disk NeilBrown
2017-02-16 4:39 ` [md PATCH 10/14] md/raid1: stop using bi_phys_segment NeilBrown
2017-02-20 10:57 ` Ming Lei
2017-02-21 0:05 ` NeilBrown
2017-02-21 7:41 ` Ming Lei
2017-03-03 0:34 ` NeilBrown
2017-02-16 4:39 ` [md PATCH 09/14] md/raid10: stop using bi_phys_segments NeilBrown
2017-02-16 14:26 ` Jack Wang
2017-02-17 2:15 ` NeilBrown
2017-02-16 4:39 ` [md PATCH 08/14] md/raid1, raid10: move rXbio accounting closer to allocation NeilBrown
2017-02-16 4:39 ` [md PATCH 07/14] Revert "md/raid5: limit request size according to implementation limits" NeilBrown
2017-02-16 4:39 ` [md PATCH 13/14] md: close a race with setting mddev->in_sync NeilBrown
2017-02-16 4:39 ` [md PATCH 14/14] MD: use per-cpu counter for writes_pending NeilBrown
2017-02-16 20:12 ` Shaohua Li
2017-02-17 2:34 ` NeilBrown
2017-02-16 4:39 ` [md PATCH 12/14] md: factor out set_in_sync() NeilBrown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=148721994202.7521.13464645140160274861.stgit@noble \
--to=neilb@suse.com \
--cc=hch@lst.de \
--cc=linux-raid@vger.kernel.org \
--cc=shli@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox