From: NeilBrown <neilb@suse.com>
To: Shaohua Li <shli@kernel.org>
Cc: linux-raid@vger.kernel.org, hch@lst.de
Subject: [md PATCH 04/15] block: trace completion of all bios.
Date: Wed, 15 Mar 2017 14:05:12 +1100 [thread overview]
Message-ID: <148954711268.18641.886158972745590154.stgit@noble> (raw)
In-Reply-To: <148954692173.18641.1294690639716682540.stgit@noble>
Currently only dm and raid5 bios trigger trace_block_bio_complete.
Rather than sprinkling trace calls around all drivers that might
want them, add the trace call to bio_endio() so that all
drivers benefit.
Signed-off-by: NeilBrown <neilb@suse.com>
---
block/bio.c | 3 +++
drivers/md/dm.c | 1 -
drivers/md/raid5.c | 8 --------
3 files changed, 3 insertions(+), 9 deletions(-)
diff --git a/block/bio.c b/block/bio.c
index 5eec5e08417f..c89d83b3ca32 100644
--- a/block/bio.c
+++ b/block/bio.c
@@ -1838,6 +1838,9 @@ void bio_endio(struct bio *bio)
goto again;
}
+ if (bio->bi_bdev)
+ trace_block_bio_complete(bdev_get_queue(bio->bi_bdev),
+ bio, bio->bi_error);
if (bio->bi_end_io)
bio->bi_end_io(bio);
}
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index f4ffd1eb8f44..f5f09ace690a 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -810,7 +810,6 @@ static void dec_pending(struct dm_io *io, int error)
queue_io(md, bio);
} else {
/* done with normal IO or empty flush */
- trace_block_bio_complete(md->queue, bio, io_error);
bio->bi_error = io_error;
bio_endio(bio);
}
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index f07cd105b9f9..7a45045ab358 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -5141,8 +5141,6 @@ static void raid5_align_endio(struct bio *bi)
rdev_dec_pending(rdev, conf->mddev);
if (!error) {
- trace_block_bio_complete(bdev_get_queue(raid_bi->bi_bdev),
- raid_bi, 0);
bio_endio(raid_bi);
if (atomic_dec_and_test(&conf->active_aligned_reads))
wake_up(&conf->wait_for_quiescent);
@@ -5727,10 +5725,6 @@ static void raid5_make_request(struct mddev *mddev, struct bio * bi)
md_write_end(mddev);
remaining = raid5_dec_bi_active_stripes(bi);
if (remaining == 0) {
-
-
- trace_block_bio_complete(bdev_get_queue(bi->bi_bdev),
- bi, 0);
bio_endio(bi);
}
}
@@ -6138,8 +6132,6 @@ static int retry_aligned_read(struct r5conf *conf, struct bio *raid_bio)
}
remaining = raid5_dec_bi_active_stripes(raid_bio);
if (remaining == 0) {
- trace_block_bio_complete(bdev_get_queue(raid_bio->bi_bdev),
- raid_bio, 0);
bio_endio(raid_bio);
}
if (atomic_dec_and_test(&conf->active_aligned_reads))
next prev parent reply other threads:[~2017-03-15 3:05 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-15 3:05 [md PATCH 00/15 v2] remove all abuse of bi_phys_segments NeilBrown
2017-03-15 3:05 ` NeilBrown [this message]
2017-03-15 3:05 ` [md PATCH 03/15] md/raid5: call bio_endio() directly rather than queueing for later NeilBrown
2017-03-15 3:05 ` [md PATCH 02/15] md/raid5: simplfy delaying of writes while metadata is updated NeilBrown
2017-03-15 23:03 ` Shaohua Li
2017-03-16 2:45 ` NeilBrown
2017-03-22 1:40 ` Fix bug in " NeilBrown
2017-03-22 2:29 ` REALLY " NeilBrown
2017-03-22 2:35 ` NeilBrown
2017-03-23 2:22 ` Shaohua Li
2017-03-15 3:05 ` [md PATCH 01/15] md/raid5: use md_write_start to count stripes, not bios NeilBrown
2017-03-15 3:05 ` [md PATCH 07/15] Revert "md/raid5: limit request size according to implementation limits" NeilBrown
2017-03-15 3:05 ` [md PATCH 05/15] md/raid5: use bio_inc_remaining() instead of repurposing bi_phys_segments as a counter NeilBrown
2017-03-15 3:05 ` [md PATCH 06/15] md/raid5: remove over-loading of ->bi_phys_segments NeilBrown
2017-03-15 3:05 ` [md PATCH 08/15] md/raid1, raid10: move rXbio accounting closer to allocation NeilBrown
2017-03-15 3:05 ` [md PATCH 09/15] md/raid10: stop using bi_phys_segments NeilBrown
2017-03-15 3:05 ` [md PATCH 12/15] md: factor out set_in_sync() NeilBrown
2017-03-15 3:05 ` [md PATCH 14/15] percpu-refcount: support synchronous switch to atomic mode NeilBrown
2017-03-15 3:05 ` [md PATCH 15/15] MD: use per-cpu counter for writes_pending NeilBrown
2017-03-16 1:05 ` Shaohua Li
2017-03-16 2:57 ` NeilBrown
2017-03-22 1:55 ` Improvement for " NeilBrown
2017-03-22 2:34 ` IMPROVEMENT for " NeilBrown
2017-03-15 3:05 ` [md PATCH 10/15] md/raid1: stop using bi_phys_segment NeilBrown
2017-03-16 0:13 ` Shaohua Li
2017-03-16 2:49 ` NeilBrown
2017-03-16 3:36 ` Shaohua Li
2017-03-22 1:41 ` Fix bugs in " NeilBrown
2017-03-15 3:05 ` [md PATCH 13/15] md: close a race with setting mddev->in_sync NeilBrown
2017-03-15 3:05 ` [md PATCH 11/15] md/raid5: don't test ->writes_pending in raid5_remove_disk NeilBrown
2017-03-16 1:12 ` [md PATCH 00/15 v2] remove all abuse of bi_phys_segments Shaohua Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=148954711268.18641.886158972745590154.stgit@noble \
--to=neilb@suse.com \
--cc=hch@lst.de \
--cc=linux-raid@vger.kernel.org \
--cc=shli@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox