Linux RAID subsystem development
 help / color / mirror / Atom feed
From: "Marc" <linux-raid@liquid-nexus.net>
To: linux-raid@vger.kernel.org
Subject: Re: Debian: how do I determine if RAID is working?
Date: Fri, 30 Apr 2004 16:25:11 +0800	[thread overview]
Message-ID: <20040430082512.M46074@liquid-nexus.net> (raw)
In-Reply-To: <JIEJLHEJOHJGIPFPDNJKEEHFDGAA.s@dondley.com>

mdadm has a few options for examining the configuration/status of arrays. 

You can also 'cat /proc/mdstat' for a quick look at your raid array's 
status..

--


---------- Original Message -----------
From: "Steve Dondley" <s@dondley.com>
To: <linux-raid@vger.kernel.org>
Sent: Fri, 30 Apr 2004 01:47:58 -0400
Subject: Debian: how do I determine if RAID is working?

> According to dmesg, the driver that I configured into my kernel for 
> my 3ware 7000 series controller card gets installed at boot time 
> with no errors. That's nice, but aside from disconnecting one of the 
> hard drives, how can I verify my RAID configuration is working?
> 
> I'm running Debian (woody) kernel 2.4.18, raid 1 configuration on two
> ATA/IDE hard drives.
> 
> Thanks!
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-
> raid" in the body of a message to majordomo@vger.kernel.org More 
> majordomo info at  http://vger.kernel.org/majordomo-info.html
------- End of Original Message -------


  reply	other threads:[~2004-04-30  8:25 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-04-30  5:47 Debian: how do I determine if RAID is working? Steve Dondley
2004-04-30  8:25 ` Marc [this message]
2004-04-30 11:37 ` Joshua Baker-LePain

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20040430082512.M46074@liquid-nexus.net \
    --to=linux-raid@liquid-nexus.net \
    --cc=linux-raid@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox