From: Simon Horman <horms@verge.net.au>
To: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Magnus Damm <magnus.damm@gmail.com>,
linux-renesas-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] ARM: shmobile: rcar-gen2: Use ICRAM1 for jump stub on all SoCs
Date: Wed, 25 May 2016 10:01:51 +0900 [thread overview]
Message-ID: <20160525010150.GD7292@verge.net.au> (raw)
In-Reply-To: <1463498133-23918-1-git-send-email-geert+renesas@glider.be>
On Tue, May 17, 2016 at 05:15:33PM +0200, Geert Uytterhoeven wrote:
> Currently the different SoCs in the R-Car Gen2 family use different
> types of on-chip RAM for the jump stub:
> - R-Car H2 uses Media RAM,
> - R-Car M2-W uses another type of optional On-chip RAM, as it doesn't
> have Media RAM,
> - R-Car M2-N uses Inter Connect RAM in Magnus Damm's "ARM: shmobile:
> r8a7793 boot address update".
>
> As all R-Car Gen2 SoCs have 4 KiB of Inter Connect RAM, consolidate the
> code by always using that.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> Tested on r8a7790/lager and r8a7791/koelsch.
> ---
> arch/arm/mach-shmobile/pm-rcar-gen2.c | 13 ++++---------
> 1 file changed, 4 insertions(+), 9 deletions(-)
Thanks, I have queued this up.
WARNING: multiple messages have this Message-ID (diff)
From: David Miller <davem@davemloft.net>
From: Simon Horman <horms@verge.net.au>
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: yanhaishuang@cmss.chinamobile.com
To: Geert Uytterhoeven <geert+renesas@glider.be>
To: horms@verge.net.au, linux-renesas-soc@vger.kernel.org,
robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
devicetree@vger.kernel.org
Cc: kuznet@ms2.inr.ac.ru, jmorris@namei.org, yoshfuji@linux-ipv6.org,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Magnus Damm <magnus.damm@gmail.com>,
linux-renesas-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: magnus.damm@gmail.com, linux@arm.linux.org.uk,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 2/2] ip6_gre: Set flowi6_proto as IPPROTO_GRE in xmit path.
Subject: Re: [PATCH] ARM: shmobile: rcar-gen2: Use ICRAM1 for jump stub on all SoCs
Subject: [PATCH 12/13] ARM: dts: blanche: initial device tree
Date: Tue, 24 May 2016 14:34:22 -0700 (PDT)
Date: Wed, 25 May 2016 10:01:51 +0900
Date: Wed, 01 Jun 2016 01:32:35 +0300 [thread overview]
Message-ID: <20160524.143422.552507610109476444.davem@davemloft.net> (raw)
Message-ID: <20160525010150.GD7292@verge.net.au> (raw)
Message-ID: <1923946.Jvi0TDUXFC@wasted.cogentembedded.com> (raw)
In-Reply-To: <1463825855-7363-2-git-send-email-yanhaishuang@cmss.chinamobile.com>
In-Reply-To: <1463498133-23918-1-git-send-email-geert+renesas@glider.be>
In-Reply-To: <13205049.n7pM8utpHF@wasted.cogentembedded.com>
From: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Date: Sat, 21 May 2016 18:17:35 +0800
> In gre6 xmit path, we are sending a GRE packet, so set fl6 proto
> to IPPROTO_GRE properly.
>
> Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Applied.
On Tue, May 17, 2016 at 05:15:33PM +0200, Geert Uytterhoeven wrote:
> Currently the different SoCs in the R-Car Gen2 family use different
> types of on-chip RAM for the jump stub:
> - R-Car H2 uses Media RAM,
> - R-Car M2-W uses another type of optional On-chip RAM, as it doesn't
> have Media RAM,
> - R-Car M2-N uses Inter Connect RAM in Magnus Damm's "ARM: shmobile:
> r8a7793 boot address update".
>
> As all R-Car Gen2 SoCs have 4 KiB of Inter Connect RAM, consolidate the
> code by always using that.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> Tested on r8a7790/lager and r8a7791/koelsch.
> ---
> arch/arm/mach-shmobile/pm-rcar-gen2.c | 13 ++++---------
> 1 file changed, 4 insertions(+), 9 deletions(-)
Thanks, I have queued this up.
Add the initial device tree for the R8A7792 SoC based Blanche board.
The board has 2 debug serial ports: SCIF0 and SCIF3; include support for
them, so that the serial console can work.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
arch/arm/boot/dts/Makefile | 1
arch/arm/boot/dts/r8a7792-blanche.dts | 44 ++++++++++++++++++++++++++++++++++
2 files changed, 45 insertions(+)
Index: renesas/arch/arm/boot/dts/Makefile
===================================================================
--- renesas.orig/arch/arm/boot/dts/Makefile
+++ renesas/arch/arm/boot/dts/Makefile
@@ -638,6 +638,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
r8a7790-lager.dtb \
r8a7791-koelsch.dtb \
r8a7791-porter.dtb \
+ r8a7792-blanche.dtb \
r8a7793-gose.dtb \
r8a7794-alt.dtb \
r8a7794-silk.dtb \
Index: renesas/arch/arm/boot/dts/r8a7792-blanche.dts
===================================================================
--- /dev/null
+++ renesas/arch/arm/boot/dts/r8a7792-blanche.dts
@@ -0,0 +1,44 @@
+/*
+ * Device Tree Source for the Blanche board
+ *
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7792.dtsi"
+
+/ {
+ model = "Blanche";
+ compatible = "renesas,blanche", "renesas,r8a7792";
+
+ aliases {
+ serial0 = &scif0;
+ serial1 = &scif3;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x40000000>;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <20000000>;
+};
+
+&scif0 {
+ status = "okay";
+};
+
+&scif3 {
+ status = "okay";
+};
next prev parent reply other threads:[~2016-05-25 1:01 UTC|newest]
Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1463825855-7363-1-git-send-email-yanhaishuang@cmss.chinamobile.com>
[not found] ` <1463825855-7363-2-git-send-email-yanhaishuang@cmss.chinamobile.com>
2016-05-17 15:15 ` [PATCH] ARM: shmobile: rcar-gen2: Use ICRAM1 for jump stub on all SoCs Geert Uytterhoeven
2016-05-25 1:01 ` Simon Horman [this message]
2016-05-31 22:06 ` [PATCH 00/13] Add R8A7794/SILK board eMMC DT support Sergei Shtylyov
2016-05-31 22:09 ` [PATCH 01/13] ARM: shmobile: r8a7792: add clock index macros Sergei Shtylyov
2016-06-01 0:52 ` Simon Horman
2016-06-01 13:57 ` Sergei Shtylyov
2016-06-22 19:52 ` Sergei Shtylyov
2016-06-22 22:33 ` Simon Horman
2016-06-23 7:46 ` Geert Uytterhoeven
2016-06-23 10:49 ` Sergei Shtylyov
2016-06-01 7:22 ` Geert Uytterhoeven
2016-06-01 14:09 ` Sergei Shtylyov
2016-05-31 22:11 ` [PATCH 02/13] ARM: shmobile: r8a7792: add power domain " Sergei Shtylyov
2016-06-01 7:32 ` Geert Uytterhoeven
2016-05-31 22:15 ` [PATCH 03/13] soc: renesas: rcar-sysc: add R8A7792 support Sergei Shtylyov
2016-06-01 7:38 ` Geert Uytterhoeven
2016-05-31 22:18 ` [PATCH 04/13] ARM: shmobile: r8a7792: basic SoC support Sergei Shtylyov
2016-06-01 0:25 ` Simon Horman
2016-06-01 7:47 ` Geert Uytterhoeven
2016-06-01 21:00 ` Sergei Shtylyov
2016-06-06 18:59 ` Sergei Shtylyov
2016-05-31 22:20 ` [PATCH 05/13] DT: clock: rcar-gen2-cpg-clocks: document R8A7792 support Sergei Shtylyov
2016-06-01 0:25 ` Simon Horman
2016-06-01 0:30 ` Simon Horman
2016-06-01 7:50 ` Geert Uytterhoeven
2016-06-01 7:48 ` Geert Uytterhoeven
2016-06-03 1:49 ` Rob Herring
2016-05-31 22:21 ` [PATCH 06/13] DT: clock: cpg-mstp-clocks: document-R8A7792-support Sergei Shtylyov
2016-06-01 0:28 ` Simon Horman
2016-06-01 7:51 ` Geert Uytterhoeven
2016-06-03 1:50 ` Rob Herring
2016-05-31 22:24 ` [PATCH 07/13] ARM: dts: r8a7792: initial SoC device tree Sergei Shtylyov
2016-06-01 0:57 ` Simon Horman
2016-06-01 14:00 ` Sergei Shtylyov
2016-06-06 22:26 ` Sergei Shtylyov
2016-06-07 7:13 ` Geert Uytterhoeven
2016-06-07 20:58 ` Sergei Shtylyov
2016-06-10 1:02 ` Simon Horman
2016-06-10 19:29 ` Sergei Shtylyov
2016-06-10 20:42 ` Geert Uytterhoeven
2016-06-10 20:50 ` Sergei Shtylyov
2016-06-13 7:12 ` Geert Uytterhoeven
2016-06-13 11:24 ` Sergei Shtylyov
2016-06-13 11:48 ` Geert Uytterhoeven
2016-06-14 1:08 ` Kuninori Morimoto
2016-06-17 2:14 ` Kuninori Morimoto
2016-06-17 6:27 ` Geert Uytterhoeven
2016-06-14 0:43 ` Simon Horman
2016-06-14 21:08 ` Sergei Shtylyov
2016-06-16 0:06 ` Simon Horman
2016-06-01 9:23 ` Geert Uytterhoeven
2016-05-31 22:25 ` [PATCH 08/13] ARM: dts: r8a7792: add SYS-DMAC support Sergei Shtylyov
2016-06-01 1:03 ` Simon Horman
2016-06-01 8:15 ` Geert Uytterhoeven
2016-05-31 22:26 ` [PATCH 09/13] ARM: dts: r8a7792: add [H]SCIF support Sergei Shtylyov
2016-06-01 1:13 ` Simon Horman
2016-06-03 14:33 ` Sergei Shtylyov
2016-06-01 8:17 ` Geert Uytterhoeven
2016-05-31 22:29 ` [PATCH 10/13] ARM: dts: r8a7792: add IRQC support Sergei Shtylyov
2016-06-01 1:18 ` Simon Horman
2016-06-01 14:02 ` Sergei Shtylyov
2016-06-01 8:17 ` Geert Uytterhoeven
2016-05-31 22:30 ` [PATCH 11/13] DT: arm: shmobile: document Blanche board Sergei Shtylyov
2016-05-31 23:51 ` Simon Horman
2016-06-01 13:34 ` Sergei Shtylyov
2016-06-01 8:19 ` Geert Uytterhoeven
2016-06-03 1:50 ` Rob Herring
2016-05-31 22:32 ` [PATCH 12/13] ARM: dts: blanche: initial device tree Sergei Shtylyov
2016-05-24 21:34 ` [PATCH v2 2/2] ip6_gre: Set flowi6_proto as IPPROTO_GRE in xmit path., Re: [PATCH] ARM: shmobile: rcar-gen2: Use ICRAM1 for jump stub on all SoCs, " David Miller, Simon Horman, Sergei Shtylyov
2016-06-01 1:21 ` Simon Horman
2016-06-02 21:34 ` Sergei Shtylyov
2016-06-01 8:36 ` Geert Uytterhoeven
2016-05-31 22:33 ` [PATCH 13/13] ARM: dts: blanche: add Ethernet support Sergei Shtylyov
2016-06-01 1:24 ` Simon Horman
2016-06-01 8:22 ` Geert Uytterhoeven
2016-06-01 12:16 ` Sergei Shtylyov
2016-06-01 12:27 ` Geert Uytterhoeven
2016-06-02 21:33 ` Sergei Shtylyov
2016-06-01 7:04 ` [PATCH 00/13] Add R8A7794/SILK board eMMC DT support Geert Uytterhoeven
2016-06-01 10:30 ` Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160525010150.GD7292@verge.net.au \
--to=horms@verge.net.au \
--cc=geert+renesas@glider.be \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox