From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: linus.walleij@linaro.org, linux-renesas-soc@vger.kernel.org,
laurent.pinchart@ideasonboard.com, linux-gpio@vger.kernel.org,
geert+renesas@glider.be
Subject: [PATCH] pinctrl: sh-pfc: r8a7792: add SDHI pin groups
Date: Wed, 13 Jul 2016 00:40:03 +0300 [thread overview]
Message-ID: <3437294.RhgABMHgKt@wasted.cogentembedded.com> (raw)
In-Reply-To: <1501145.5ro9yfox2Z@wasted.cogentembedded.com>
Add SDHI0 pin groups to the R8A7792 PFC driver.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
The patch is against the 'devel' branch of Linus Walleij's 'linux-pinctrl.git'
repo plus my 2 R8A7792 PFC patches posted before and the EtherAVB patch just
reposted...
drivers/pinctrl/sh-pfc/pfc-r8a7792.c | 51 +++++++++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)
Index: linux-pinctrl/drivers/pinctrl/sh-pfc/pfc-r8a7792.c
===================================================================
--- linux-pinctrl.orig/drivers/pinctrl/sh-pfc/pfc-r8a7792.c
+++ linux-pinctrl/drivers/pinctrl/sh-pfc/pfc-r8a7792.c
@@ -932,6 +932,43 @@ static const unsigned int scif3_clk_pins
static const unsigned int scif3_clk_mux[] = {
SCK3_MARK,
};
+/* - SDHI0 ------------------------------------------------------------------ */
+static const unsigned int sdhi0_data1_pins[] = {
+ /* DAT0 */
+ RCAR_GP_PIN(11, 7),
+};
+static const unsigned int sdhi0_data1_mux[] = {
+ SD0_DAT0_MARK,
+};
+static const unsigned int sdhi0_data4_pins[] = {
+ /* DAT[0-3] */
+ RCAR_GP_PIN(11, 7), RCAR_GP_PIN(11, 8),
+ RCAR_GP_PIN(11, 9), RCAR_GP_PIN(11, 10),
+};
+static const unsigned int sdhi0_data4_mux[] = {
+ SD0_DAT0_MARK, SD0_DAT1_MARK, SD0_DAT2_MARK, SD0_DAT3_MARK,
+};
+static const unsigned int sdhi0_ctrl_pins[] = {
+ /* CLK, CMD */
+ RCAR_GP_PIN(11, 5), RCAR_GP_PIN(11, 6),
+};
+static const unsigned int sdhi0_ctrl_mux[] = {
+ SD0_CLK_MARK, SD0_CMD_MARK,
+};
+static const unsigned int sdhi0_cd_pins[] = {
+ /* CD */
+ RCAR_GP_PIN(11, 11),
+};
+static const unsigned int sdhi0_cd_mux[] = {
+ SD0_CD_MARK,
+};
+static const unsigned int sdhi0_wp_pins[] = {
+ /* WP */
+ RCAR_GP_PIN(11, 12),
+};
+static const unsigned int sdhi0_wp_mux[] = {
+ SD0_WP_MARK,
+};
static const struct sh_pfc_pin_group pinmux_groups[] = {
SH_PFC_PIN_GROUP(avb_link),
@@ -958,6 +995,11 @@ static const struct sh_pfc_pin_group pin
SH_PFC_PIN_GROUP(scif0_ctrl),
SH_PFC_PIN_GROUP(scif3_data),
SH_PFC_PIN_GROUP(scif3_clk),
+ SH_PFC_PIN_GROUP(sdhi0_data1),
+ SH_PFC_PIN_GROUP(sdhi0_data4),
+ SH_PFC_PIN_GROUP(sdhi0_ctrl),
+ SH_PFC_PIN_GROUP(sdhi0_cd),
+ SH_PFC_PIN_GROUP(sdhi0_wp),
};
static const char * const avb_groups[] = {
@@ -999,12 +1041,21 @@ static const char * const scif3_groups[]
"scif3_clk",
};
+static const char * const sdhi0_groups[] = {
+ "sdhi0_data1",
+ "sdhi0_data4",
+ "sdhi0_ctrl",
+ "sdhi0_cd",
+ "sdhi0_wp",
+};
+
static const struct sh_pfc_function pinmux_functions[] = {
SH_PFC_FUNCTION(avb),
SH_PFC_FUNCTION(intc),
SH_PFC_FUNCTION(lbsc),
SH_PFC_FUNCTION(scif0),
SH_PFC_FUNCTION(scif3),
+ SH_PFC_FUNCTION(sdhi0),
};
static const struct pinmux_cfg_reg pinmux_config_regs[] = {
next prev parent reply other threads:[~2016-07-12 21:40 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1501145.5ro9yfox2Z@wasted.cogentembedded.com>
2016-07-04 19:52 ` [PATCH] pinctrl: sh-pfc: r8a7792: add EtherAVB pin groups Sergei Shtylyov
2016-07-05 6:57 ` Geert Uytterhoeven
2016-07-05 11:00 ` Sergei Shtylyov
2016-07-05 14:54 ` Linus Walleij
2016-07-05 15:46 ` Geert Uytterhoeven
2016-07-05 21:14 ` Linus Walleij
2016-07-06 17:18 ` Sergei Shtylyov
2016-07-05 21:53 ` [PATCH] gpio: rcar: document R8A7792 support Sergei Shtylyov
2016-07-07 11:10 ` Sergei Shtylyov
2016-07-07 14:11 ` [PATCH] gpio: rcar: add " Sergei Shtylyov
2016-07-11 7:49 ` Linus Walleij
2016-07-12 21:38 ` [PATCH v2] pinctrl: sh-pfc: r8a7792: add EtherAVB pin groups Sergei Shtylyov
2016-07-13 6:13 ` Geert Uytterhoeven
2016-07-14 12:09 ` Sergei Shtylyov
2016-07-12 21:40 ` Sergei Shtylyov [this message]
2016-07-13 6:17 ` [PATCH] pinctrl: sh-pfc: r8a7792: add SDHI " Geert Uytterhoeven
2016-08-04 7:44 ` Linus Walleij
2016-07-14 19:51 ` [PATCH] pinctrl: sh-pfc: r8a7792: add CAN " Sergei Shtylyov
2016-07-18 9:25 ` Geert Uytterhoeven
2016-07-22 13:51 ` [PATCH] pinctrl: sh-pfc: r8a7792: add missing pinmux data Sergei Shtylyov
2016-08-04 8:04 ` Linus Walleij
2016-08-04 13:39 ` Sergei Shtylyov
2016-08-08 10:32 ` Geert Uytterhoeven
2016-07-22 22:24 ` [PATCH] pinctrl: sh-pfc: r8a7792: add VIN pin groups Sergei Shtylyov
2016-08-03 19:51 ` Sergei Shtylyov
2016-08-05 20:52 ` [PATCH v2] " Sergei Shtylyov
2016-08-08 11:46 ` Geert Uytterhoeven
2016-08-05 20:54 ` [PATCH] pinctrl: sh-pfc: r8a7792: add DU " Sergei Shtylyov
2016-08-08 12:06 ` Geert Uytterhoeven
2016-09-02 21:49 ` Sergei Shtylyov
2016-09-02 21:50 ` [PATCH resend] pinctrl: sh-pfc: r8a7792: add QSPI " Sergei Shtylyov
2016-09-05 9:00 ` Geert Uytterhoeven
2016-09-07 21:49 ` Linus Walleij
2016-09-05 20:17 ` [PATCH] pinctrl: sh-pfc: r8a7792: add MSIOF " Sergei Shtylyov
2016-09-06 7:02 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3437294.RhgABMHgKt@wasted.cogentembedded.com \
--to=sergei.shtylyov@cogentembedded.com \
--cc=geert+renesas@glider.be \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox