[RFC v1 0/1] Enable SPCR table for console output on RISC-V

[RFC v1 0/1] Enable SPCR table for console output on RISC-V

[Sia Jee Heng]

This patch will enable the SPCR table for RISC-V.

Vendor will enable/disable the SPCR table in the firmware based on the
platform design. However, in cases where the SPCR table is not usable,
a kernel parameter could be used to specify the preferred console.

This patch depends on Sunil's patch series, as indicated in [1] and
the corresponding Qemu patch can be found at [2].

[1] https://lore.kernel.org/lkml/20231219174526.2235150-1-sunilvl@ventanamicro.com/
[2] https://lore.kernel.org/qemu-devel/20231228080616.158822-1-jeeheng.sia@starfivetech.com/

Sia Jee Heng (1):
  RISC-V: ACPI: Enable SPCR table for console output on RISC-V

 arch/riscv/kernel/acpi.c | 4 ++++
 1 file changed, 4 insertions(+)

-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[RFC v1 1/1] RISC-V: ACPI: Enable SPCR table for console output on RISC-V

[Sia Jee Heng]

The ACPI SPCR code has been used to enable console output for ARM64 and
X86. The same code can be reused for RISC-V.

Vendor will enable/disable the SPCR table in the firmware based on the
platform design. However, in cases where the SPCR table is not usable,
a kernel parameter could be used to specify the preferred console.

Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
---
 arch/riscv/kernel/acpi.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/riscv/kernel/acpi.c b/arch/riscv/kernel/acpi.c
index e619edc8b0cc..5ec2fdf9e09f 100644
--- a/arch/riscv/kernel/acpi.c
+++ b/arch/riscv/kernel/acpi.c
@@ -18,6 +18,7 @@
 #include <linux/io.h>
 #include <linux/memblock.h>
 #include <linux/pci.h>
+#include <linux/serial_core.h>
 
 int acpi_noirq = 1;		/* skip ACPI IRQ initialization */
 int acpi_disabled = 1;
@@ -151,6 +152,9 @@ void __init acpi_boot_table_init(void)
 		if (!param_acpi_force)
 			disable_acpi();
 	}
+
+	if (!acpi_disabled)
+		acpi_parse_spcr(earlycon_acpi_spcr_enable, true);
 }
 
 static int acpi_parse_madt_rintc(union acpi_subtable_headers *header, const unsigned long end)
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [RFC v1 1/1] RISC-V: ACPI: Enable SPCR table for console output on RISC-V

[Andrew Jones]

On Fri, Dec 29, 2023 at 02:54:05PM +0800, Sia Jee Heng wrote:
> The ACPI SPCR code has been used to enable console output for ARM64 and
> X86. The same code can be reused for RISC-V.
> 
> Vendor will enable/disable the SPCR table in the firmware based on the
> platform design. However, in cases where the SPCR table is not usable,
> a kernel parameter could be used to specify the preferred console.
> 
> Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
> ---
>  arch/riscv/kernel/acpi.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/riscv/kernel/acpi.c b/arch/riscv/kernel/acpi.c
> index e619edc8b0cc..5ec2fdf9e09f 100644
> --- a/arch/riscv/kernel/acpi.c
> +++ b/arch/riscv/kernel/acpi.c
> @@ -18,6 +18,7 @@
>  #include <linux/io.h>
>  #include <linux/memblock.h>
>  #include <linux/pci.h>
> +#include <linux/serial_core.h>
>  
>  int acpi_noirq = 1;		/* skip ACPI IRQ initialization */
>  int acpi_disabled = 1;
> @@ -151,6 +152,9 @@ void __init acpi_boot_table_init(void)
>  		if (!param_acpi_force)
>  			disable_acpi();
>  	}
> +
> +	if (!acpi_disabled)
> +		acpi_parse_spcr(earlycon_acpi_spcr_enable, true);

Both arm64 and loongarch call early_init_dt_scan_chosen_stdout() when
acpi_disabled and earlycon_acpi_spcr_enable are both true. Is that
not necessary for RISC-V?

Thanks,
drew

>  }
>  
>  static int acpi_parse_madt_rintc(union acpi_subtable_headers *header, const unsigned long end)
> -- 
> 2.34.1
> 

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

RE: [RFC v1 1/1] RISC-V: ACPI: Enable SPCR table for console output on RISC-V

[JeeHeng Sia]

> -----Original Message-----
> From: Andrew Jones <ajones@ventanamicro.com>
> Sent: Tuesday, January 2, 2024 11:39 PM
> To: JeeHeng Sia <jeeheng.sia@starfivetech.com>
> Cc: linux-kernel@vger.kernel.org; linux-riscv@lists.infradead.org; rafael.j.wysocki@intel.com; conor.dooley@microchip.com;
> sunilvl@ventanamicro.com; aou@eecs.berkeley.edu; palmer@dabbelt.com; paul.walmsley@sifive.com
> Subject: Re: [RFC v1 1/1] RISC-V: ACPI: Enable SPCR table for console output on RISC-V
> 
> On Fri, Dec 29, 2023 at 02:54:05PM +0800, Sia Jee Heng wrote:
> > The ACPI SPCR code has been used to enable console output for ARM64 and
> > X86. The same code can be reused for RISC-V.
> >
> > Vendor will enable/disable the SPCR table in the firmware based on the
> > platform design. However, in cases where the SPCR table is not usable,
> > a kernel parameter could be used to specify the preferred console.
> >
> > Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
> > ---
> >  arch/riscv/kernel/acpi.c | 4 ++++
> >  1 file changed, 4 insertions(+)
> >
> > diff --git a/arch/riscv/kernel/acpi.c b/arch/riscv/kernel/acpi.c
> > index e619edc8b0cc..5ec2fdf9e09f 100644
> > --- a/arch/riscv/kernel/acpi.c
> > +++ b/arch/riscv/kernel/acpi.c
> > @@ -18,6 +18,7 @@
> >  #include <linux/io.h>
> >  #include <linux/memblock.h>
> >  #include <linux/pci.h>
> > +#include <linux/serial_core.h>
> >
> >  int acpi_noirq = 1;		/* skip ACPI IRQ initialization */
> >  int acpi_disabled = 1;
> > @@ -151,6 +152,9 @@ void __init acpi_boot_table_init(void)
> >  		if (!param_acpi_force)
> >  			disable_acpi();
> >  	}
> > +
> > +	if (!acpi_disabled)
> > +		acpi_parse_spcr(earlycon_acpi_spcr_enable, true);
> 
> Both arm64 and loongarch call early_init_dt_scan_chosen_stdout() when
> acpi_disabled and earlycon_acpi_spcr_enable are both true. Is that
> not necessary for RISC-V?
It is needed for device tree support. However, since this patch targets
ACPI, that's why I didn't include a DT solution in this patch. I can
submit a separate patch targeting DT-based earlycon if needed. Please let
me know if you think otherwise.
> 
> Thanks,
> drew
> 
> >  }
> >
> >  static int acpi_parse_madt_rintc(union acpi_subtable_headers *header, const unsigned long end)
> > --
> > 2.34.1
> >

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv