[PATCH v2] serial: sifive: Switch to nbcon console

* [PATCH v2] serial: sifive: Switch to nbcon console
@ 2025-04-05 14:59 Ryo Takakura
  2025-04-06  0:48 ` kernel test robot
  2025-04-10 12:29 ` Petr Mladek
  0 siblings, 2 replies; 5+ messages in thread
From: Ryo Takakura @ 2025-04-05 14:59 UTC (permalink / raw)
  To: alex, aou, bigeasy, conor.dooley, gregkh, jirislaby, john.ogness,
	palmer, paul.walmsley, pmladek, samuel.holland, u.kleine-koenig
  Cc: linux-kernel, linux-riscv, linux-serial, Ryo Takakura

Add the necessary callbacks(write_atomic, write_thread, device_lock
and device_unlock) and CON_NBCON flag to switch the sifive console
driver to perform as nbcon console.

Both ->write_atomic() and ->write_thread() will check for console
ownership whenever they are accessing registers.

The ->device_lock()/unlock() will provide the additional serilization
necessary for ->write_thread() which is called from dedicated printing
thread.

Signed-off-by: Ryo Takakura <ryotkkr98@gmail.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
---

This patch is once again sent as a standalone patch for converting sifive
driver to nbcon. It used to be sent as a part of series. The related fixes
along the way can be found [0].

Sincerely,
Ryo Takakura

[0] https://lore.kernel.org/all/20250405043833.397020-1-ryotkkr98@gmail.com/

---
 drivers/tty/serial/sifive.c | 87 +++++++++++++++++++++++++++++++------
 1 file changed, 74 insertions(+), 13 deletions(-)

diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c
index 054a8e630..8f7f770ec 100644
--- a/drivers/tty/serial/sifive.c
+++ b/drivers/tty/serial/sifive.c
@@ -151,6 +151,7 @@ struct sifive_serial_port {
 	unsigned long		baud_rate;
 	struct clk		*clk;
 	struct notifier_block	clk_notifier;
+	bool			console_line_ended;
 };
 
 /*
@@ -785,33 +786,88 @@ static void sifive_serial_console_putchar(struct uart_port *port, unsigned char
 
 	__ssp_wait_for_xmitr(ssp);
 	__ssp_transmit_char(ssp, ch);
+
+	ssp->console_line_ended = (ch == '\n');
+}
+
+static void sifive_serial_device_lock(struct console *co, unsigned long *flags)
+{
+	struct uart_port *up = &sifive_serial_console_ports[co->index]->port;
+
+	__uart_port_lock_irqsave(up, flags);
+}
+
+static void sifive_serial_device_unlock(struct console *co, unsigned long flags)
+{
+	struct uart_port *up = &sifive_serial_console_ports[co->index]->port;
+
+	__uart_port_unlock_irqrestore(up, flags);
 }
 
-static void sifive_serial_console_write(struct console *co, const char *s,
-					unsigned int count)
+static void sifive_serial_console_write_atomic(struct console *co,
+					       struct nbcon_write_context *wctxt)
 {
 	struct sifive_serial_port *ssp = sifive_serial_console_ports[co->index];
-	unsigned long flags;
+	struct uart_port *port = &ssp->port;
 	unsigned int ier;
-	int locked = 1;
 
 	if (!ssp)
 		return;
 
-	if (oops_in_progress)
-		locked = uart_port_trylock_irqsave(&ssp->port, &flags);
-	else
-		uart_port_lock_irqsave(&ssp->port, &flags);
+	if (!nbcon_enter_unsafe(wctxt))
+		return;
 
 	ier = __ssp_readl(ssp, SIFIVE_SERIAL_IE_OFFS);
 	__ssp_writel(0, SIFIVE_SERIAL_IE_OFFS, ssp);
 
-	uart_console_write(&ssp->port, s, count, sifive_serial_console_putchar);
+	if (!ssp->console_line_ended)
+		uart_console_write(port, "\n", 1, sifive_serial_console_putchar);
+	uart_console_write(port, wctxt->outbuf, wctxt->len,
+			   sifive_serial_console_putchar);
 
 	__ssp_writel(ier, SIFIVE_SERIAL_IE_OFFS, ssp);
 
-	if (locked)
-		uart_port_unlock_irqrestore(&ssp->port, flags);
+	nbcon_exit_unsafe(wctxt);
+}
+
+static void sifive_serial_console_write_thread(struct console *co,
+					       struct nbcon_write_context *wctxt)
+{
+	struct sifive_serial_port *ssp = sifive_serial_console_ports[co->index];
+	struct uart_port *port = &ssp->port;
+	unsigned int ier;
+
+	if (!ssp)
+		return;
+
+	if (!nbcon_enter_unsafe(wctxt))
+		return;
+
+	ier = __ssp_readl(ssp, SIFIVE_SERIAL_IE_OFFS);
+	__ssp_writel(0, SIFIVE_SERIAL_IE_OFFS, ssp);
+
+	if (nbcon_exit_unsafe(wctxt)) {
+		int len = READ_ONCE(wctxt->len);
+		int i;
+
+		for (i = 0; i < len; i++) {
+			if (!nbcon_enter_unsafe(wctxt))
+				break;
+
+			uart_console_write(port, wctxt->outbuf + i, 1,
+					   sifive_serial_console_putchar);
+
+			if (!nbcon_exit_unsafe(wctxt))
+				break;
+		}
+	}
+
+	while (!nbcon_enter_unsafe(wctxt))
+		nbcon_reacquire_nobuf(wctxt);
+
+	__ssp_writel(ier, SIFIVE_SERIAL_IE_OFFS, ssp);
+
+	nbcon_exit_unsafe(wctxt);
 }
 
 static int sifive_serial_console_setup(struct console *co, char *options)
@@ -829,6 +885,8 @@ static int sifive_serial_console_setup(struct console *co, char *options)
 	if (!ssp)
 		return -ENODEV;
 
+	ssp->console_line_ended = true;
+
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
 
@@ -839,10 +897,13 @@ static struct uart_driver sifive_serial_uart_driver;
 
 static struct console sifive_serial_console = {
 	.name		= SIFIVE_TTY_PREFIX,
-	.write		= sifive_serial_console_write,
+	.write_atomic	= sifive_serial_console_write_atomic,
+	.write_thread	= sifive_serial_console_write_thread,
+	.device_lock	= sifive_serial_device_lock,
+	.device_unlock	= sifive_serial_device_unlock,
 	.device		= uart_console_device,
 	.setup		= sifive_serial_console_setup,
-	.flags		= CON_PRINTBUFFER,
+	.flags		= CON_PRINTBUFFER | CON_NBCON,
 	.index		= -1,
 	.data		= &sifive_serial_uart_driver,
 };
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply related	[flat|nested] 5+ messages in thread