Linux-RISC-V Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Chen Wang <unicorn_wang@outlook.com>
To: soc@kernel.org, Arnd Bergmann <arnd@arndb.de>
Cc: Conor Dooley <conor+dt@kernel.org>,
	Inochi Amaoto <inochiama@gmail.com>,
	"sophgo@lists.linux.dev" <sophgo@lists.linux.dev>,
	linux-riscv <linux-riscv@lists.infradead.org>,
	Alexander Sverdlin <alexander.sverdlin@gmail.com>,
	Han Gao <rabenda.cn@gmail.com>, Longbin Li <looong.bin@gmail.com>
Subject: Re: [GIT PULL] RISC-V Sophgo Devicetrees for v6.17
Date: Wed, 16 Jul 2025 08:02:41 +0800	[thread overview]
Message-ID: <MAUPR01MB110727528F71CCD79A3ACE321FE56A@MAUPR01MB11072.INDPRD01.PROD.OUTLOOK.COM> (raw)
In-Reply-To: <MAUPR01MB11072B86FA33FAFCDA1FD2D1CFE54A@MAUPR01MB11072.INDPRD01.PROD.OUTLOOK.COM>

Hi,Arnd,

Excuse me. We just discovered that we missed a patch and I'd like to 
withdraw this PR. I'll re-tag it and issue a new PR shortly.

Thanks,

Chen

On 2025/7/14 14:05, Chen Wang wrote:
> Hey Arnd,
>
> Please pull dt changes for RISC-V/Sophgo.
>
> Thanks,
>
> Chen
>
> The following changes since commit 
> 347e9f5043c89695b01e66b3ed111755afcf1911:
>
>   Linux 6.16-rc6 (2025-07-13 14:25:58 -0700)
>
> are available in the Git repository at:
>
>   https://github.com/sophgo/linux.git tags/riscv-sophgo-dt-for-v6.17
>
> for you to fetch changes up to a3ec6cda33ea16e3b7cfee80a6278085948cb793:
>
>   riscv: dts: sophgo: sophgo-srd3-10: reserve uart0 device (2025-07-14 
> 08:44:04 +0800)
>
> ----------------------------------------------------------------
> RISC-V Devicetrees for v6.17
>
> Sophgo:
>
> For CV18xx serials:
> - Add rtcsys device node.
> - Add reset device node.
> - Add ethernet device node.
> - Add support for Duo Module 01 Evaluation Board.
>   This board uses SG2000(old codename CV181xH),
>   which is dual-arch, RISC-V and ARM64. This
>   patch add the support for ARM64.
> - Enable ethernet device for Huashan Pi.
>
> For SG2042:
> - Add ISA extensions such as xtheadvector/ziccrse/zfh.
> - Add ethernet device node.
> - Add Sophgo SG2042_EVB_V1 & SG2042_EVB_V2 boards.
>
> For SG2044:
> - Add pmu configuration
> - Add ziccrse extension
> - Add missing riscv,cbop-block-size property
> - Add MSI/PCIe device node
> - Add pwm device node
> - Add SPI-NOR device node
> - Add pinctrl device node
> - Add ethernet device node
> - Add MMC device node
> - add DMA device node
> - Add I2C device node
> - Add GPIO device node
> - Add clock device node
> - Add system controller device node
> - Add HWMON MCU device for sophgo-srd3-10 board.
> - Reserve uart0 device node for sophgo-srd3-10 board.
>
> Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
>
> ----------------------------------------------------------------
> Alexander Sverdlin (7):
>       riscv: dts: sophgo: cv18xx: Add RTCSYS device node
>       dt-bindings: soc: sophgo: Move SoCs/boards from riscv into soc, 
> add SG2000
>       arm64: dts: sophgo: Add initial SG2000 SoC device tree
>       arm64: dts: sophgo: Add Duo Module 01
>       arm64: dts: sophgo: Add Duo Module 01 Evaluation Board
>       arm64: Add SOPHGO SOC family Kconfig support
>       arm64: defconfig: Enable rudimentary Sophgo SG2000 support
>
> Han Gao (7):
>       riscv: dts: sophgo: Add xtheadvector to the sg2042 devicetree
>       riscv: dts: sophgo: add ziccrse for sg2042
>       riscv: dts: sophgo: add zfh for sg2042
>       riscv: dts: sophgo: sg2044: add ziccrse extension
>       dt-bindings: riscv: add Sophgo SG2042_EVB_V1.X/V2.0 bindings
>       riscv: dts: sophgo: add Sophgo SG2042_EVB_V1.X board device tree
>       riscv: dts: sophgo: add Sophgo SG2042_EVB_V2.0 board device tree
>
> Inochi Amaoto (20):
>       riscv: dts: sophgo: sg2044: Add system controller device
>       riscv: dts: sophgo: sg2044: Add clock controller device
>       riscv: dts: sophgo: sg2044: Add GPIO device
>       riscv: dts: sophgo: sg2044: Add I2C device
>       riscv: dts: sophgo: sg2044: add DMA controller device
>       riscv: dts: sophgo: sg2044: Add MMC controller device
>       riscv: dts: sophgo: sophgo-srd3-10: add HWMON MCU device
>       riscv: dts: sophgo: sg2044: Add ethernet control device
>       riscv: dts: sophgo: sg2044: Add pinctrl device
>       riscv: dts: sophgo: sg2044: Add missing riscv,cbop-block-size 
> property
>       riscv: dts: sophgo: add reset generator for Sophgo CV1800 series 
> SoC
>       riscv: dts: sophgo: add reset configuration for Sophgo CV1800 
> series SoC
>       riscv: dts: sophgo: sg2044: add MSI device support for SG2044
>       riscv: dts: sophgo: sg2044: add PCIe device support for SG2044
>       riscv: dts: sophgo: sg2044: add pmu configuration
>       riscv: dts: sophgo: Add ethernet device for cv18xx
>       riscv: dts: sophgo: Add mdio multiplexer device for cv18xx
>       riscv: dts: sophgo: Enable ethernet device for Huashan Pi
>       riscv: dts: sophgo: add ethernet GMAC device for sg2042
>       riscv: dts: sophgo: sophgo-srd3-10: reserve uart0 device
>
> Longbin Li (2):
>       riscv: dts: sophgo: add SG2044 SPI NOR controller driver
>       riscv: dts: sophgo: add pwm controller for SG2044
>
>  .../bindings/{riscv => soc/sophgo}/sophgo.yaml     |   9 +-
>  arch/arm64/Kconfig.platforms                       |   6 +
>  arch/arm64/boot/dts/Makefile                       |   1 +
>  arch/arm64/boot/dts/sophgo/Makefile                |   2 +
>  .../dts/sophgo/sg2000-milkv-duo-module-01-evb.dts  |  76 ++++
>  .../dts/sophgo/sg2000-milkv-duo-module-01.dtsi     |  40 ++
>  arch/arm64/boot/dts/sophgo/sg2000.dtsi             |  86 ++++
>  arch/arm64/configs/defconfig                       |   4 +
>  arch/riscv/boot/dts/sophgo/Makefile                |   2 +
>  arch/riscv/boot/dts/sophgo/cv180x.dtsi             | 110 +++++
>  arch/riscv/boot/dts/sophgo/cv1812h-huashan-pi.dts  |   8 +
>  arch/riscv/boot/dts/sophgo/cv18xx-reset.h          |  98 ++++
>  arch/riscv/boot/dts/sophgo/sg2042-cpus.dtsi        | 384 
> ++++++++++------
>  arch/riscv/boot/dts/sophgo/sg2042-evb-v1.dts       | 245 ++++++++++
>  arch/riscv/boot/dts/sophgo/sg2042-evb-v2.dts       | 233 ++++++++++
>  arch/riscv/boot/dts/sophgo/sg2042.dtsi             |  61 +++
>  arch/riscv/boot/dts/sophgo/sg2044-cpus.dtsi        | 283 +++++++++---
>  .../boot/dts/sophgo/sg2044-sophgo-srd3-10.dts      |  87 ++++
>  arch/riscv/boot/dts/sophgo/sg2044.dtsi             | 499 
> +++++++++++++++++++++
>  19 files changed, 2041 insertions(+), 193 deletions(-)
>  rename Documentation/devicetree/bindings/{riscv => 
> soc/sophgo}/sophgo.yaml (76%)
>  create mode 100644 arch/arm64/boot/dts/sophgo/Makefile
>  create mode 100644 
> arch/arm64/boot/dts/sophgo/sg2000-milkv-duo-module-01-evb.dts
>  create mode 100644 
> arch/arm64/boot/dts/sophgo/sg2000-milkv-duo-module-01.dtsi
>  create mode 100644 arch/arm64/boot/dts/sophgo/sg2000.dtsi
>  create mode 100644 arch/riscv/boot/dts/sophgo/cv18xx-reset.h
>  create mode 100644 arch/riscv/boot/dts/sophgo/sg2042-evb-v1.dts
>  create mode 100644 arch/riscv/boot/dts/sophgo/sg2042-evb-v2.dts
>

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  reply	other threads:[~2025-07-16  0:14 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-07-14  6:05 [GIT PULL] RISC-V Sophgo Devicetrees for v6.17 Chen Wang
2025-07-16  0:02 ` Chen Wang [this message]
  -- strict thread matches above, loose matches on Subject: below --
2025-07-23  7:13 Chen Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=MAUPR01MB110727528F71CCD79A3ACE321FE56A@MAUPR01MB11072.INDPRD01.PROD.OUTLOOK.COM \
    --to=unicorn_wang@outlook.com \
    --cc=alexander.sverdlin@gmail.com \
    --cc=arnd@arndb.de \
    --cc=conor+dt@kernel.org \
    --cc=inochiama@gmail.com \
    --cc=linux-riscv@lists.infradead.org \
    --cc=looong.bin@gmail.com \
    --cc=rabenda.cn@gmail.com \
    --cc=soc@kernel.org \
    --cc=sophgo@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox