Linux-Rockchip Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Shawn Lin <shawn.lin@rock-chips.com>
To: Vinod Koul <vkoul@kernel.org>
Cc: Kishon Vijay Abraham I <kishon@kernel.org>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Heiko Stuebner <heiko@sntech.de>,
	linux-phy@lists.infradead.org,
	linux-rockchip@lists.infradead.org,
	Shawn Lin <shawn.lin@rock-chips.com>
Subject: [PATCH v2 2/2] phy: rockchip: naneng-combphy: Fix PCIe L1ss support RK3562
Date: Tue, 18 Nov 2025 17:52:06 +0800	[thread overview]
Message-ID: <1763459526-35004-2-git-send-email-shawn.lin@rock-chips.com> (raw)
In-Reply-To: <1763459526-35004-1-git-send-email-shawn.lin@rock-chips.com>

When PCIe link enters L1 PM substates, the PHY will turn off its
PLL for power-saving. However, it turns off the PLL too fast which
leads the PHY to be broken. According to the PHY document, we need
to delay PLL turnoff time.

Fixes: f13bff25161b ("phy: rockchip-naneng-combo: Support rk3562")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
---

Changes in v2:
- add more commit message

 drivers/phy/rockchip/phy-rockchip-naneng-combphy.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
index e303bec..7f8fc8e 100644
--- a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
+++ b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
@@ -106,6 +106,10 @@
 #define RK3568_PHYREG18				0x44
 #define RK3568_PHYREG18_PLL_LOOP		0x32
 
+#define RK3568_PHYREG30				0x74
+#define RK3568_PHYREG30_GATE_TX_PCK_SEL         BIT(7)
+#define RK3568_PHYREG30_GATE_TX_PCK_DLY_PLL_OFF BIT(7)
+
 #define RK3568_PHYREG32				0x7C
 #define RK3568_PHYREG32_SSC_MASK		GENMASK(7, 4)
 #define RK3568_PHYREG32_SSC_DIR_MASK		GENMASK(5, 4)
@@ -664,6 +668,10 @@ static int rk3562_combphy_cfg(struct rockchip_combphy_priv *priv)
 	case REF_CLOCK_100MHz:
 		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_100m, true);
 		if (priv->type == PHY_TYPE_PCIE) {
+			/* Gate_tx_pck_sel length select for L1ss support */
+			rockchip_combphy_updatel(priv, RK3568_PHYREG30_GATE_TX_PCK_SEL,
+						 RK3568_PHYREG30_GATE_TX_PCK_DLY_PLL_OFF,
+						 RK3568_PHYREG30);
 			/* PLL KVCO tuning fine */
 			val = FIELD_PREP(RK3568_PHYREG33_PLL_KVCO_MASK,
 					 RK3568_PHYREG33_PLL_KVCO_VALUE);
-- 
2.7.4


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

  reply	other threads:[~2025-11-18  9:52 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-11-18  9:52 [PATCH v2 1/2] phy: rockchip: naneng-combphy: Fix PCIe L1ss support RK3528 Shawn Lin
2025-11-18  9:52 ` Shawn Lin [this message]
2025-11-18 13:47   ` [PATCH v2 2/2] phy: rockchip: naneng-combphy: Fix PCIe L1ss support RK3562 Neil Armstrong
2025-11-18 13:47 ` [PATCH v2 1/2] phy: rockchip: naneng-combphy: Fix PCIe L1ss support RK3528 Neil Armstrong
2025-11-20 17:12 ` Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1763459526-35004-2-git-send-email-shawn.lin@rock-chips.com \
    --to=shawn.lin@rock-chips.com \
    --cc=heiko@sntech.de \
    --cc=kishon@kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=neil.armstrong@linaro.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox